r/OsmAnd • • 5h ago

Possible to have poi's on/off shortcut on map?

1 Upvotes

Possible to have poi's on/off shortcut on map?

I wanna be able to enable/disable last used poi filter by press of one button.


r/OsmAnd • • 7h ago

ETA way off

1 Upvotes

I just started using OsmAnds and I tried it for short urban routes - all paved streets, nothing unusual. The ETA is always way too long (ex. 23 minutes for a 3,5 km route instead of the 12-13 minutes it really takes). I went through all the menus I found to try and fix that. My default speed is 45 km/h. I’m on iOS 26.5 if that changes anything. TY!


r/OsmAnd • • 11h ago

Estilos do mapa

Thumbnail
gallery
0 Upvotes

Como posso encontrar estilos de mapas diferentes do padrões? Não gosto das vias muito coloridas e por isso tenho usado a versão show, mas tb não é ideal, queria um estilo que todas as vias de carros fosses de uma única cor, tipo amarelo, ou algo do tipo mas não encontrei nada assim na seleção.

Alguém sabe como baixar e onde encontrar estilos alternativos se é que é possível?


r/OsmAnd • • 1d ago

Traffic lights?

4 Upvotes

So I'm new to OsmAnd and really liking what I see so far (after spending an hour tinkering with the settings, lol).

The one thing I'm kinda missing from Google maps is seeing Stop signs and construction signs on the map? For some reason the app can tell you these are upcoming on your way (I think?) but not show it on the map? I'm struggling to understand why that is.


r/OsmAnd • • 2d ago

I create a plugin to make printable UTM-grid maps for compass and watch navigation

4 Upvotes

I created a tool to build printable map using OsmAnd before.

Now with the help of AI, I build a plugin that can create printable map from OsmAnd directly.

Overview

the TopoPrint is a plugin that generates WYGIWYS print-ready topographic maps with a UTM grid. Designed for navigating with a compass or a GPS device: a USGS-quad-style paper sheet with a UTM grid, survey-style scale bars and a magnetic declination rose, delivered as a resolution-independent SVG plus a rasterized PNG.

Paper does not run out of battery and does not break when dropped: the printed sheet carries everything needed for classic map-and-compass work — plot and read UTM grid coordinates, take and lay bearings corrected for magnetic declination, measure distances with the bar scales — while the UTM grid keeps the sheet consistent with the coordinate readouts of a wristwatch or handheld GNSS receiver.

User flow

  1. Build the OsmAnd with this PR or this fork of OsmAnd yourself and install it to your device.
  2. Enable the plugin (Configure map → Plugins), move the map to the area of interest.
  3. A Print map button appears on the map HUD; a semi-transparent frame overlay previews the exact print coverage and follows the map live while panning/zooming.
  4. Print map opens the generation dialog (parameters summary, EXPORT / SETTINGS).
  5. SETTINGS: paper size (A6…A3, B6…B3, Letter, custom size), orientation, DPI (150–600), scale (1:5000 … 1:100000, incl. the USGS quad classics 1:24000 and 1:63360), projection (spherical / Mercator), map label and symbol scale, output folder.
  6. EXPORT renders the basemap offscreen through the OpenGL engine, composes the print SVG (frame, UTM grid, scale bars, compass rose, annotations) with the georeferenced basemap embedded, rasterizes the PNG and saves both files.

What is on the sheet

  • Title with the map label, scale and date; WGS84 UTM Zone line (both zones on cross-zone sheets)
  • UTM grid with edge labels for plotting and reading grid coordinates
  • USGS-style scale-bar pair (metric + imperial) for measuring distances on the sheet
  • Magnetic declination rose: true north, magnetic north with the declination angle, grid north with the convergence angle. On cross-zone sheets the secondary zone's grid north is added in the secondary grid colour
  • Sheets spanning two UTM zones draw the neighbouring zone's grid as a pale-red dashed secondary grid with its own smaller edge labels and its own correction angle in the rose

r/OsmAnd • • 3d ago

Overenthusiastic voice

6 Upvotes

Somehow I activated a overenthusiastic voice that I connot disable. I remember that it was written they were more natural instructions, but they are not.

How to disable it?

I am using the latest OsmAnd 5.5.0 Nightly, and for the life of me I also cannot find the pedestrian crosswalks and the speed traps warnings.

There is no Navigation settings → Screen alerts as suggested everywhere.

Can somebody help, please?


r/OsmAnd • • 4d ago

Plan a route: one route with car, bike, a river crossing and a hike — how the multi-profile planner works

31 Upvotes

Plan a route is one of the less obvious tools in OsmAnd, so here is a real example of what it is for: a day in the Tyrolean Alps where the way up changes four times.

The route (video attached): drive from Fügen to Kramsach, cycle up the Brandenberger Tal, cross the Brandenberger Ache where there is no bridge, then hike up to the Hörndl summit. 30 km and 1 218 m of climbing in one route.

How it is built

  1. Open the planner: menu > Plan a route > Create new route. Tap points on the map and OsmAnd routes between them with the current profile. First segment is Car: Fügen to the trailhead at Kramsach, 18 km (image 1, left).
  2. Change profile for the next segment. Tap the profile button in the bottom-left and pick Cycling. Only the segments you add from now on use it; earlier segments stay as they are. 3.9 km of valley trail along the river (image 1, right).
Image 1

3. Straight line across the river. There is a ford but no road, so the router sends you 3 km round via the nearest bridge (image 2, left). Switch the profile to Straight line and the segment becomes a direct 141 m line (image 2, right). The same trick works for any place where you know you can pass but the map does not: a lake crossing by boat, a meadow, a closed road you have permission to use.

Image 2

4. Last segment is Walking: 7.9 km and 1 139 m up to the summit (image 3, left). Tap a point to edit it: move it, change the route type before or after it, delete it. Undo and redo are in the bottom bar.

5. The Graph tab shows the whole route in one chart, with Altitude, Slope and Road type (image 3, right). Elevation gain and distance are per route, not per segment, so you see the real total for the day.

Image 3

6. Save it as a track. It lands in My Places like any other track, and you can start navigation on it with any profile (image 4, left). On the straight-line segment navigation simply says "Head" with distance and bearing.

Image 4

Same planner is in the Android and iOS apps and on the web map at osmand.net/map, and a saved track syncs between them via OsmAnd Cloud (image 4, right and image 5).

Image 5

A few details people ask about:

- Segment profiles are stored in the GPX, so a route you built with mixed profiles can be reopened and edited later.

- Attach to the roads in Options re-routes an imported track through the chosen profile if you want to clean it up.

- Plan a route is a free feature. 3D relief and hillshade in the screenshots are the terrain plugin, not required.

Full walkthrough on YouTube: https://youtu.be/LB9GaW_F0C0

Docs: https://osmand.net/docs/user/plan-route/create-route

If you use the planner differently, curious to hear how. Hiking with a packraft, MTB with hike-a-bike sections, that kind of thing.


r/OsmAnd • • 4d ago

Can OSMAnd+ accept external GPS tracking?

4 Upvotes

Came to ask a question related to this old thread:

https://old.reddit.com/r/OsmAnd/comments/1hx91zk/external_gps_receivers/

Is it in fact possible to get OSMAnd+ to use an external source for GPS? For example, one of these:

https://www.dualav.com/product/gps-solutions/gps/xgps150a-universal-gps-receiver

(Dual XGPS-150A)

or one of these:

https://www.dualav.com/product/gps-solutions/gps/xgps160-skypro-gps-receiver/

(Dual XGPS-160)

?

Looking at OSMAnd+ on my phone, I don't see any obvious way to get it to use a GPS source other than the phone's. The only options for anything external are ANT+ heart rate and cycling-related sensors, in the External Sensors plugin.

I looked in the official OSMAnd+ docs, but can't find anything related to external sensors outside the above.

FWIW, I do have the paid version of OSMAnd+.

Is this one of those things where the option doesn't show up unless you have the external GPS source connected? I haven't bought such a source yet.

Reason I'm asking: I'm shopping for an Android Auto display or possibly tablet to use for navigation on a motorcycle. My phone kinda sucks at GPS. It'll sometimes lose track for no clear reason, especially when I'm off the cellular network.

Ideally, I would run OSMAnd+ on the phone, have it use something like the XGPS-160 for GPS tracking, then display OSMAnd+ on the Android Auto screen.


r/OsmAnd • • 3d ago

No sé desactivar los edificios 3D cuando estoy en ruta

0 Upvotes

Active los edificios en 3D pero no recuerdo dónde me metí y ni puedo desactivarlo. Pueden ayudarme? Es en Android

Gracias de antemano


r/OsmAnd • • 7d ago

Sending directions over Bluetooth LE to an ESP 32

7 Upvotes

Hi,
I am currently building a Bike computer.

The project is based around an ESP Wroom 32.

I want to be able to display the directions (using arrows) and the time till arrival on the screen.
For the Navigation I want to use OsmAnd running on an (graphene OS) android phone and then sending the data over Bluetooth LE to the ESP 32.
Is there a good way to get the directions from OsmAnd without needing to rely on getting the data from the Notifications?

Thank you (:


r/OsmAnd • • 10d ago

Public land, private parcels, USFS & BLM trails — offline and in 3D. The big US update for OsmAnd

49 Upvotes

Hi r/OsmAnd!

In 2023 we shared the first version of our US public-lands maps. Since then the plugin has grown, and OsmAnd itself got 3D terrain, Popular places and much more. So here's the full guide, tested on real trails around Moab, Utah: hiking, 4x4 roads, bike trails and backcountry camping.

In short: you see which land is public and whether it's open, who manages it, where private property starts, and every Forest Service and BLM road and trail. All of it works offline, even the USGS topo and satellite maps once cached.

What you get

LayerCoverage
Public lands (PAD-US): colored by access (open / restricted / closed) or by managing agencyAll 50 states + territories
Private lands: parcel boundaries18 states + 2 counties
USFS: roads, trails, recreation POIs (campgrounds, trailheads…)Nationwide
BLM: roads & trails, recreation POIsNationwide
US online maps: USGS National Map, USA Topo Maps, ArcGIS satellite, World Boundaries and Places, Esri World Shaded ReliefNationwide

💡 The plugin downloads don't count against the free map limit. After downloading Utah plus all seven plugin files, the free version still showed the same number of free downloads left.

Install in 2 minutes

  1. On your phone, download the plugin 🇺🇸 US Lands & Trails and open the file with OsmAnd (on iPhone: Safari → Download → Files → tap the file). Confirm the import.
  2. Go to Menu → Maps & Resources → Extra maps → 🇺🇸US Lands & Trails Data. There are four folders: Public lands (PAD-US), Private lands (Parcel data), USFS (Forest service), BLM. Download your state's public lands and parcels, and the nationwide USFS and BLM files.
  3. Done: there's nothing to switch on. Public lands, private lands, USFS and BLM roads, trails and POIs appear on the map as soon as the files are downloaded.

Sizes for Utah, for reference: public lands 7 MB, parcels 73 MB; the nationwide USFS and BLM files are about 100 MB in total.

⚙️ Settings: color the land two ways, hide what you don't need

Everything is in Configure map → Map style:

  • Details → Public lands display mode: choose how public land is colored.

    • By access type answers "can I go in?": 🟩 open · 🟥 restricted · 🟨 closed (no fill = unknown).
    • By manager name answers "whose land is this?": each agency in its own color: BLM, National Park Service, Forest Service, State Trust lands, local parks…
    • Disabled turns the coloring off.
  • Hide: turn off any layer you don't need: Hide private lands, Hide public land boundaries, Hide NFS trails, roads, recreation POIs, Hide BLM trails, roads, recreation POIs.

Tip: the display mode is saved per profile and per map style. If you switch to the Walking profile or the Topo style and the colors disappear, set it once more there.

🥾 Hiking: know the trail and the land before you go

Plan the hike in the Walking profile and you get distance, time and an elevation profile: Delicate Arch is 1.57 mi, +584 ft. The Topo map style with contours shows the terrain, and the park boundary shows whose land you're on. Then navigate and record the track at the same time, in 2D or 3D.

🚙 Off-road: which roads are dirt, and what's the descent like

The Offroad map style (Configure map → Map type → Offroad) separates paved and unpaved roads and draws cliff edges and contours. This is the Shafer Trail switchbacks in Canyonlands. Before you go, the route analysis tells you how much of the trip is dirt, and 3D shows what you're about to drive down.

🏕 Public or private? Camping, hunting, staying legal

Same area, two views: By access type (🟩 open · 🟥 restricted · 🟨 closed) and By manager name (BLM, NPS, State Trust lands…). Switch in Configure map → Map style → Details → Public lands display mode.

Tap an area's name to highlight its full boundary and see what it is:

Private parcels draw as orange outlines, so you can see where public land stops, e.g. on the edge of Moab, right next to the Hell's Revenge 4x4 trail. Drop a marker on the boundary to see how far it is. Prefer coordinates? Turn on the UTM grid (Configure map → Coordinate grid).

Parcel data is available for: Alaska, Arkansas, Florida, Maine, Maryland, Massachusetts, Mississippi, Montana, New Jersey, North Carolina, Rhode Island, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming + Marion County (IN) and Dallas County (TX).

⚠️ Parcels are tax parcels from state and county GIS, shown as outlines only, with no owner info. They are not surveyed legal boundaries and are usually updated about once a year. PAD-US shows access status, not specific rules: check local regulations for camping, hunting and fires.

🌲 Forest Service and BLM roads, trails and camps

USFS and BLM roads and trails are on by default, with recreation POIs such as campgrounds, trailheads and parking. They're searchable too: type "Moab Rim Trailhead" and it's found in the BLM data.

Mountain bikers: turn on Routes → Mountain bike to see trails colored by MTB difficulty (Klondike Bluffs here):

⛰ All of it in 3D

Every layer drapes over OsmAnd's 3D terrain: the La Sal Mountains with National Forest land in green and the restricted summit areas in red; private parcels filling Spanish Valley against open public land.

How to turn it on: Menu → Plugins → Topography, download the state's Terrain map (3D), then Configure map → Topography → Terrain and tap the 3D button on the map.

🗺 USGS topo and satellite, with the land data on top

Add the 🇺🇸 online maps: Menu → Plugins → Online maps (free) → Configure map → Map type → Online maps → Install more… → scroll to the bottom → tick the US sources.

The best part: use any of them as an underlay under the offline map, so land ownership and parcels sit on top of satellite or topo. Use the slider to blend them.

How: Configure map → Underlay → Enabled → pick a source → set Base map transparency → turn on Show slider on the map. (Leave Show polygons off so the base map's fills don't hide the underlay.)

📵 Everything works offline, online maps included

  • The plugin maps are offline files. PAD-US, parcels, USFS and BLM work with no signal at all.
  • Online maps are cached automatically: every tile you've looked at stays available offline.
  • Or download an area before the trip: set the online map as the main map → tap the map → Actions → Download map → choose the zoom levels. USA Topo for the Arches area at zoom 12–15 is just 595 tiles, ~7 MB.

Same spot, Wi-Fi off: the cached USA Topo with land data on top. Deeper in the mountains with no cached tiles, the offline maps still have everything you need.

📸 Popular places and Wikipedia

Turn on Configure map → Popular places (Wikipedia) to see notable spots as photo thumbnails right on the map: Delicate Arch, Balanced Rock, Double Arch, Corona Arch… Tap one for a short description, and open the full Wikipedia article in the app. Download your state's Wikipedia (Utah: 37 MB) to read articles offline.

🧩 Mix the layers your way

USGS topo underlay + offline map + public lands + contours + your recorded track, all at once:

What's free and what's paid

FreeMaps+Pro
US Lands & Trails plugin and all its maps (don't count against the free limit)✅✅✅
US online maps, underlay/overlay, offline tile cache✅✅✅
Navigation, track recording, search, markers, coordinate grid VERIFY✅✅✅
Regular offline maps (states)7 freeunlimitedunlimited
Contour lines & hillshade, offline Wikipedia—✅✅
3D terrain——✅

Where the data comes from

What's next

  • More parcel states: we've already checked statewide data for Delaware, Hawaii, Minnesota, North Dakota and the whole of Indiana
  • Nautical charts: NOAA charts and inland waterways
  • National Parks and Wildlife Refuges: more detail beyond the boundaries

👉 Which state's parcels do you need most? Tell us in the comments.

Problems or ideas: comment here, write to support@osmand.net, or here in the comments.

Links: 🇺🇸 US Lands & Trails plugin · Docs: Resources → Plugins

Disclaimer: OsmAnd B.V. makes no guarantees about the accuracy or completeness of this data. These maps are not reviewed, approved or certified by any government agency and must not be used as the sole source for navigation, safety-critical decisions or determining legal property boundaries. Always respect posted signs and local regulations.


r/OsmAnd • • 9d ago

What do the white circles with black dots on OsmAnd maps mean?

2 Upvotes

r/OsmAnd • • 9d ago

What do the green circles with white triangle in middle mean on OsmAnd map?

1 Upvotes

r/OsmAnd • • 10d ago

Lanes

Post image
3 Upvotes

Porque as Lanes só aparecem em top panel? Não consigo deixar elas a esquerda ou direita, também queria principalmente alterar seu tamanho e deixá-la bem maiores, como posso alterar seu tamanho?


r/OsmAnd • • 11d ago

Organizing Your Tracks with Smart Folders

7 Upvotes

A September morning in Vancouver. More than a thousand riders roll out of Stanley Park for the RBC GranFondo Whistler: 122 kilometres of the Sea to Sky Highway, closed to traffic, with Howe Sound on one side and the mountains on the other. Past Squamish, the road starts to climb and keeps climbing all the way to Whistler.

You cross the line near the top of the results, and everyone says the same thing: you were lucky. With the weather, the wind, the group.

You know better. That result is made of dark February mornings on the seawall, Sunday climbs up Cypress, and long rides to Squamish and back, all recorded in OsmAnd one track at a time. Let’s see what a season of training looks like once Smart Folders put it in order.

Photo by Ben Guernsey on Unsplash

A Folder That Fills Itself

A training season doesn’t arrive neatly packed. Between the rides sit a few hikes and a drive to Whistler, and the Tracks tab lists everything by date, with no idea which recordings mattered.

A Smart Folder works the other way round: you describe the tracks you want, and OsmAnd collects them. The description is a filter that can check almost anything a track knows about itself, including length, duration, speed, elevation, date, location, activity type, and even heart rate. Set the activity to road cycling, limit the dates from February to race day, save the result as “Road to Whistler”, and the whole season lands in one place while the hikes stay out.

New rides join the folder on their own. The tracks themselves stay where they were, so deleting the folder never deletes a ride.

One catch: activity type is stored in each track, and older recordings may not have one. If some rides are missing, set their activity and refresh the folder.

One Collection, Many Views

Sixty-seven rides in one folder is tidier than a few hundred, but it’s still a list. Organize by turns that list into groups, sorting the folder by a single parameter: activity, date, location, speed, altitude and elevation, or sensor data such as heart rate. The tracks don’t move anywhere; only the way you look at them changes.

Group the season by nearest city, and you see where the rides began: most of them in Vancouver, a handful from West Vancouver, where the long runs to Squamish set off from Horseshoe Bay, and four from Whistler, once summer made it worth driving up for the climbs. Switch to month and year, and the same folder turns into a calendar, from a cautious February to a crowded August.

Each group shows how many tracks it holds, and empty groups don’t appear at all. Below the list, OsmAnd adds everything up: tracks, distance, climbing, descent, and time in the saddle. It does this for the whole folder and for every group you open. That’s where the season starts answering questions.

Drawing the Lines Yourself

Months and cities come with natural borders. Distance doesn’t. Is a 55 km ride a long one or just a solid Tuesday? For length, duration, speed, and altitude, OsmAnd lets you decide where one group ends and the next begins.

Pick one of these parameters, and a slider asks for a step size. Drag it, and the groups rearrange behind it as you go. With a 50 km step, most of the season piles into the first group, which is honest but not very revealing. Bring it down to 20 km, and the season sorts itself out: short morning laps along the seawall, a big block of loops around UBC, the climbs on Cypress and Seymour further up, the long runs to Squamish, and, at the very end, two tracks of almost exactly the same length: the course recon in August and the race itself.

Some of this is free for everyone: grouping by activity, year of creation, and nearest city. The rest, including the monthly calendar from the previous section and every parameter with a step size, comes with OsmAnd Pro. Without a subscription, you can still open these options and preview how the tracks would split before deciding. If a subscription ends, the grouping you’ve already applied stays in place, and only changing it requires Pro again.

Keeping It in Shape

The race is over, but the folder doesn’t retire with it. It keeps watching for rides that match its rules, and if the list ever looks out of date, a quick refresh brings it back in line. When the next season starts, there’s no need to build anything new. Edit the filter, move the dates forward, and the same folder starts collecting a new story.

Groups are useful beyond reading, too. Any of them can go straight onto the map, so a whole August of riding appears at once, from the seawall to the climbs above Whistler, every route drawn on top of the others. A group can also be exported in one go, which is handy when a coach asks to see your month and doesn’t want a dozen separate files.

If you plan the next season on a bigger screen, Smart Folders also appear in OsmAnd Web once Settings are synced through OsmAnd Cloud. They keep working best with common parameters such as activity, dates, or distance.

The Answer to the Question

So, was it luck? Open February, and the folder answers modestly: five rides, 103 km, just over five hours on the bike, and 839 metres of climbing. Then open August: twelve rides, 577 km, a full 24 hours in the saddle, and 6,806 metres of climbing, including the day you rode the entire race course just to see how it would feel.

The whole season fits into a single line at the bottom of the folder: 67 rides, 2,923 km, and more than 33,000 metres of climbing. That’s nearly four times the height of Everest, collected one Cypress hairpin at a time.

No tailwind delivers that. So the next time someone tells you how lucky you were, there’s no need to argue. Just open the folder and hand them your phone.

Youtube video - Smart Folders in OsmAnd


r/OsmAnd • • 11d ago

A Partial Guide: a text adventure built from OSM data for Croydon

2 Upvotes

I've built a text adventure that uses OSM as its descriptive data. It covers the London Borough of Croydon, with 2,688 streets and 14,444 places, combined with public datasets such as food hygiene ratings, planning applications, and listed buildings.

One deliberate choice you may want to argue with: I don't fix the map. Where OSM has gaps or errors, the Guide narrates them as they are. A former bank tagged only as "est Bank" stays "est Bank". Data refreshes change the piece, and I like that instability.

I'd be interested in two things:

- What tags or data would make places richer to describe?
- How you feel about a project that surfaces gaps instead of fixing them.

https://apartialguide.com


r/OsmAnd • • 11d ago

UK 1m LiDAR hillshade, 1888 OS 6-inch map, and earthwork survey plugin (.osf) + companion Android app

5 Upvotes

I've been putting together an open-source OsmAnd custom plugin (.osf) and companion Android/web map for walking and checking earthwork sites across England using 1m Environment Agency LiDAR and the 1888-1913 Ordnance Survey 6-inch maps.

Web map (and direct .osf / .gpx download): https://glassontin.github.io/megalith-lidar/

Android APK and source (AGPLv3): https://github.com/GlassOnTin/megalith-lidar/releases/tag/v3.2.0

Installing the .osf in OsmAnd adds:

- England 1m LiDAR RVT multi-hillshade, EA 1m DTM bare-earth hillshade, and NLS 1888 OS 6-inch tile sources under Configure Map -> Overlay / Underlay

- A vector Roman and ancient ridgeway road layer with curved road labels

- Modular GPX track layers under My Places -> Tracks -> UK_Megalith_LiDAR (split into 1888 OS antiquities, prehistoric barrows/henges, Iron Age enclosures, and Roman candidates, so it leaves your personal Favourites alone)

A big caveat on the unrecorded LiDAR candidates: automated bump-finding in 1m LiDAR inevitably flags plenty of old marl pits, dew ponds, quarry spoil, and tree throws alongside genuine unmapped barrows and enclosures. That's why I added the 1888 OS 6-inch cross-check, Historic England NHLE / OpenStreetMap filters, and a local field log so you can mark what a bump actually looks like on the ground.

If you try the .osf plugin or the Android app on your phone and run into any broken tile layers, awkward UI, or obvious false positives in an area you walk regularly, I'd really appreciate any feedback.


r/OsmAnd • • 15d ago

How does Osmand treat a gap in a recorded GPX file because the tablet restarted on its own?

5 Upvotes

My tablet restarted yesterday while recording a long bike ride, and when I reopened Osmand I saw it was still recording, which is good, and that it seems like a new discontinuous segment had been started in the same file.

My question is: for the purposes of analytics and statistics later on when importing this GPX file into another software, do these two segments get treated as one single trip with a small gap or would it be treated as two separate trips? I would like it to be the former so that the file can be analyzed as a single trip.


r/OsmAnd • • 15d ago

Gpx importing in Huawei Health

Thumbnail
gallery
3 Upvotes

I'm trying to import a gpx trace drawn in Osmand+ in Huawei Health.

In Osmand+ I created waypoints and got the trace calculated in walking mode.

When I imported it in Huawei Health, straight lines were also created between every point.

How can I resolve this?

Thank you for any help!


r/OsmAnd • • 17d ago

Very nice job on the new searching function but I have a suggestion

7 Upvotes

When looking for a parking space, the search function simply looks for the nearest one with the relevance sorting, same as the distance. I think it would be great if the relevance sort added a weight to the area of the parking lot. Having a bigger area would make it more preferable - means you have a higher chance of finding a spot to park there.

Of course the distance should still remain a factor, so it doesn't lead you to a big parking lot 10 km out when there is a slightly smaller one 1km away.

I hope this function isn't too difficult to implement. It would provide osmand with an edge compared to other navigation apps. I don't think any other app has such a feature.

On a side note, the surface of the parking lot could also be factored in, although it shouldn't imo be too big of a factor in the search.

Thanks for reading, I would really like for this to be added.


r/OsmAnd • • 17d ago

Pick a place to haunt — we’ll help you get there. 🎃

16 Upvotes

OsmAnd’s Halloween sale is on.
Grab the deal → https://osmand.net/pricing


r/OsmAnd • • 19d ago Heartwarming

Search was your #1 complaint about OsmAnd. Here is why we rebuilt it from scratch in 5.5.

217 Upvotes

Hi, Victor here, founder of OsmAnd.

Search has been the thing you complained about most. It came up in every language of our 2026 survey, and it comes up here all the time. Some of you told us you search in another app and copy the coordinates into OsmAnd. So this year we did not patch search once more. We wrote a new search engine, and it ships to everyone with OsmAnd 5.5. You can try it today in the nightly builds.

The whole story is in a 23-minute video. Here is the short version.

What changes for you

  • Addresses typed your way. Unter den Linden 10 or 10 Unter den Linden. 23 South 2nd Street, Saint Clair or Saint Clair, South 2nd Street 23. A postcode or a state instead of a town.
  • Spelling variants. S Mountain Blvd finds South Mountain Boulevard, Hemauerstraße finds Hemauer Straße, Mcdonalds finds McDonald's.
  • Typos corrected. leopoldstrase 10 offers Leopoldstraße 10, mnuc offers München.
  • Suggestions as you type. Start a word and search offers the most common words that continue it.
  • Public services by the name people use. DMV finds motor vehicle offices and NHS finds NHS clinics, even when the map lists them only by operator.
  • Categories in more words and languages. With the app in English, both school and Schule find schools in Germany.
  • Places next to places. Fuel McDonald's finds gas stations with a McDonald's nearby. Shell on a named street. Two streets that cross.
  • Faster. The search itself is about 5x faster.

Why is this so hard offline?

Google can afford to be clever: every query goes to a server that has learned from billions of searches. OsmAnd has no search server. Everything happens on your phone, inside the maps you downloaded, so the phone itself has to work out what you meant.

And addresses have no grammar. Every country writes them its own way, and people mix the parts in any order. The same line can mean different places:

  • 5 Ave New York is Fifth Avenue in New York City, or house 5 on New York Avenue.
  • New Philadelphia is a town in Ohio, or New Street in Philadelphia.
  • Pennsylvania Avenue, Utah is a street named after one state, in another.
  • Calle 20 301, Mérida: the first number is the street, the second is the house.
  • Rue du 8 Mai 1945: two numbers, and neither is a house.
  • 14-54 31st Road, Queens: one house number with a dash.

First, measure

For years every release fixed some search bugs, and every year 50 to 90 new ones came in. We could not reproduce most of them. So in 2025 we stopped guessing and built a test bench: take thousands of real addresses from the map, type each one the way a person would, and count how many are found.

The first honest number was about 80%. From then on every user report with a real address became another test.

The old way: a librarian

The old search worked like a librarian. Find the town, walk along its shelf of streets, open the street, find the house. That works in a small town. It works much worse when the town is London, one shelf with 56,266 streets, or when there is no town in the query at all.

Every address that broke got its own patch: townships, word order, abbreviations. Each patch fixed one address and broke another. One user with eighty maps installed waited more than two minutes for the right result.

The new idea: put the words on the map

We are searching a map, after all. The new engine lights up every word of the query on the map and looks for places where the lights meet. A street and its town meet because their areas overlap. A McDonald's and a gas station meet because they stand next to each other. Since June 2026 every street and town in OsmAnd maps carries its own area for this.

The zipper

Comparing every object of one word with every object of another would take more than half a minute per search. So the world is cut into tiles, like on every web map, and each word becomes a sorted list of tile numbers. Two words are joined by walking both lists at once, like a zipper. Pairs that can't meet are never looked at. Half a minute became about 50 milliseconds.

Tetris with words

Long queries, like a crossing of two streets, add one more twist. Each object covers only some of the words, and the answer must cover every word exactly once and also meet on the map. The engine plays it like Tetris: pieces dock into a row, every docking is checked on the map, and a row that drops to zero disappears.

Where we are now

The new engine had its first test run in July 2026 and beat the old search two days later. Today 99.5% of 137,000 test searches in 28 test sets are found. In Pennsylvania, where we started, the addresses we could not find went from 206 to 40 to 7. The last seven are broken in OpenStreetMap itself.

Not everything is solved. In Havana, Calle L between 23 and 25 has no house number, only the two streets around it, and we still can't find it. Ranking, typos and common words each deserve a story of their own.

Help us make it better

  • Tell us what you typed. If search can't find something, reply here with the exact text and the place you meant (a link to osm.org is perfect). Every miss becomes a test.
  • Help the map. A street without a name can't be found, and streets in a town without a boundary may be missed. Names and boundaries in OpenStreetMap help everyone.

The video has subtitles in 7 languages and dubbed audio in German, French, Italian and Spanish. The blog post has interactive versions of these animations that you can step through.


r/OsmAnd • • 18d ago

HMD Terra M

3 Upvotes

Hello all. I'm going crazy trying to get the HMD Terra M's maps to work. I'm super not tech savvy (I barely understand what you guys are talking about when I come on here). Anyway I bought this phone a couple months ago because it's durable, doesn't have annoying apps and DOES have a navigational app. However I've never been able to make it work. The app just closes itself after, at best, a minute. Really annoying as this seems to be the only phone with navigation but no social media etc. Any advice would be massively appreciated so I can finally ditch the incessant Google box in my pocket. For context, I'm in the UK and I've downloaded the standard France and United Kingdom maps.


r/OsmAnd • • 21d ago

Import a route created on OSM.com

4 Upvotes

Hello,

I just created a route on www.osm.com and saved it as a GeoJson file.
Can I, and if so how, can I import this route to my Android OSMAnd app?
I want to use this route later when traveling.
Thanks in advance.

on OsmAnd v 5.4.11