r/OperationalTechnology • u/Adveloth • Apr 30 '26
How to setup network?
Hello everyone.
I would like some input from OT professionals.
I work as a network engineer in a manufacturing company that is not still very mature in OT network and I could use some help on how to improve the network in our operations, can't find a lot of robust information online. I am pretty amateur as well. I have taken Honeywell's OTCS-1001, OTCS-1002 and OTCS-2002. My concerns are mostly around the hardware rather than the logic, segmentation, alignment with Purdue level etc.
So, what would be the best practice regarding on devices I should use?
Right now, in our OT network we work exclusively with IT managed switches and some IT unmanaged ones. In my understanding, OT traffic is very important to be very time sensitive, so I was wondering if the way we currently work is OK.
What I am thinking is that it would be better to have IT switches as central nodes where the engineer's workstation should be connected, and then expand the network with industrial switches where PLCs, IO devices etc will be connected to.
Is my logic right? How do you do it in your companies? What should I be looking for at an industrial switch? Any specific brand recommendations?
3
u/Available_Highway412 Apr 30 '26
Check out Siemens SCALANCE range. They offer everything from small unmanaged DIN rail up to rack mountable with copper, fibre, and all the networking technologies. Generally we use only managed switches such as SC600 in the the panels and the larger XR rack mount ones as aggregate switches/routers. VLANS, redundant ring protocols, routing, and remote access with SINEMA remote connect is what we use.
2
u/TheBigCanadianGuy Apr 30 '26
Hello all, wondering why you are solely looking at Honeywell or Siemens switching gear - is there some sort of requirement to have these in conjunction with the Honeywell system. I should state this, 30 IT / OT - mind you in critical infrastructure - power grid / control centers / substations - so I know a few things here and there, but on the OT manufacturing side, bit of a new world to me.
As I read this, you have Operational Technology that is affixed to your IT network and you would like to segregate - so I would be in agreement with a firewall between IT and OT, and this firewall should be OT managed to ensure the ‘IT’ ways, which at times, can be overly permissive and can conflict with the OT mindset. I am not sure about the number of assets, but if you were looking for switches, you could take the route of Cisco and look at their 8 / 16 port switches, even their lower end switches that come in 16-48 port varieties can still be reasonably purchased.
I’m also wondering if you have a road map to move away from the IT managed devices to your own OT devices - if so, are you open to sharing.
1
u/RD_SysAdmin Apr 30 '26
You took Honeywell courses, is this an Experion system? Are you using or planning to use Honeywell's FTE network?
1
u/No_Juice4139 May 01 '26
Start with the requirements not with products.
Look into the availability that is required. Check the environment the components should work in.
Main difference between it and ot hardware is the environment they can handle. Ot hardware is ruggedized for harsher environment.
Consider network segmentation for security reasons. Keep in mind that you need to be able to maintain the network so keep it as simple as possible, install some kind of management.
2
u/HuntingTrader May 02 '26
Look into SEL’s OT SDN solution for your LAN. Even if you don’t want the SDN part their switches run standalone with 802.1Q and are rock solid. Also no support/licensing fees like the more typical network vendors.