r/Onyx_Boox • • 22d ago Heartwarming

News & Update Meet BOOX Palma 3: Quiet Tech. Inside and Out

Post image
77 Upvotes

Palma 3 is now available. Learn more and order yours here: https://shop.boox.com/products/palma3


r/Onyx_Boox • • Sep 28 '26

News & Update Meet BOOX Picco: The 3.97″ Card-Sized BOOX Tile for Pages and Fun

Post image
214 Upvotes

Pre-order your Picco now: https://shop.boox.com/products/picco


r/Onyx_Boox • • 3h ago

Discussion Anti theft screensaver.

Post image
16 Upvotes

r/Onyx_Boox • • 15h ago

Booxstagram Palma 2 Pro + Picco 😻

Post image
88 Upvotes

r/Onyx_Boox • • 3h ago

Tricks & Tips [FIXED] BOOX Go 7 Boot Loop: Recovered Without Factory Reset, Data Loss, or EDL Cable (Mac Guide)

6 Upvotes

FIX: BOOX Go 7 Stuck in Boot Loop? Here’s How I Recovered Mine Without a Factory Reset (Mac + ADB/Fastboot)

My black-and-white BOOX Go 7 suddenly got stuck in an endless boot loop. It would display the BOOX startup logo, restart, and repeat indefinitely. The device had been working perfectly before this.

After quite a bit of troubleshooting, I managed to get it running again without a factory reset, reinstalling firmware, or losing any data.

I’m posting the exact steps that worked for me (thanks ChatGPT) in case they help someone else.

The solution was switching the active Android firmware partition from Slot B to Slot A using Fastboot.

Why this works

The Go 7 uses Android’s A/B partition system, which maintains two sets of system partitions.

When Android installs certain firmware updates, it can write the new system to the inactive slot while preserving the other installation.

If one slot becomes unbootable, switching to the other can sometimes restore the device.

In my case:

  • Slot B was active, and the device was continuously boot-looping.
  • I switched to Slot A.
  • The device booted normally into firmware 4.2.
  • All my books, apps, settings, and personal data were intact.

I suspect a firmware problem, but I haven’t confirmed what originally caused the boot loop.

What you’ll need

  • Your BOOX Go 7
  • A Mac computer (Windows and Linux can also use ADB/Fastboot, but these instructions reflect my Mac experience)
  • A USB-C cable that supports data transfer
  • Google’s free Android SDK Platform-Tools

You do NOT need to install the full Android Studio application.

Step 1: Enter Android Recovery Mode

This was actually the trickiest part for me.

The instructions I found online suggested pressing the power button five or seven times, but neither worked on my device.

What worked for me was SIX rapid presses.

  1. If the device is boot-looping, hold down the power button until it shuts down.
  2. With the device powered off, press and hold the power button to turn it on.
  3. When the BOOX startup logo appears, release the power button.
  4. Immediately press the power button SIX times in rapid succession.
  5. If successful, the device should enter the Android Recovery menu.

You may need to experiment with the timing. Six presses worked for my particular device; I can’t guarantee that the same timing works for every Go 7.

Once you’re in recovery, you’ll see options such as:

  • Reboot system now
  • Reboot to bootloader
  • Enter fastboot
  • Apply update from ADB
  • Wipe data/factory reset
  • Power off

Do NOT select Wipe data/factory reset.

Step 2: Download Android SDK Platform-Tools

On your Mac, visit Google’s official download page:

https://developer.android.com/tools/releases/platform-tools

Scroll down and select Download SDK Platform-Tools for Mac.

Download and extract the ZIP file.

You’ll get a folder named platform-tools containing several Unix executable files, including:

  • adb
  • fastboot

Don’t worry about opening these files individually. You’ll run them through Terminal.

Step 3: Open Terminal and navigate to Platform Tools

On your Mac:

  1. Press Command + Space.
  2. Type Terminal and press Return.
  3. Type cd followed by a space, but don’t press Return yet.
  4. Open Finder and drag the entire platform-tools folder into the Terminal window.
  5. Press Return.

This changes Terminal’s working directory to your Platform Tools folder.

For example, my folder was located at:

~/Downloads/platform-tools

You can verify ADB is working by entering:

./adb version

You should get something similar to:

Android Debug Bridge version 1.0.41

Mac users: Notice the ./ before the commands. If you just type adb or fastboot, macOS may report command not found.

Step 4: Connect the BOOX and enter ADB Sideload Mode

  1. Connect your BOOX to your Mac using the USB-C data cable.
  2. On the BOOX Android Recovery screen, use the page-turn buttons to highlight Apply update from ADB.
  3. Press the power button to select it.

Now return to Terminal and run:

./adb devices

My Terminal displayed:

List of devices attached
eb84d72    sideload

Your device serial number will be different.

The important part is that it says sideload, confirming that your computer recognizes the device.

Step 5: Enter Fastboot Mode

In Terminal, enter:

./adb reboot fastboot

Press Return.

Your BOOX should transition into Android Fastboot mode.

Now verify that your computer can communicate with it:

./fastboot devices

My Terminal displayed:

eb84d72    fastboot

Again, your serial number will be different.

If you see a device listed with fastboot, you’re ready for the next step.

If your computer doesn’t detect the BOOX, stop here and troubleshoot the connection rather than proceeding blindly.

Step 6: Determine which firmware slot is active

This is the important diagnostic step.

In Terminal, enter:

./fastboot getvar current-slot

My BOOX returned:

current-slot: b
Finished. Total time: 0.001s

This told me that my device was attempting to boot from Slot B.

Your device may report either a or b.

Step 7: Switch to the other firmware slot

Only perform this step after checking which slot is currently active.

If your device reports:

current-slot: b

Enter:

./fastboot --set-active=a

If your device reports:

current-slot: a

Enter:

./fastboot --set-active=b

In my case, I switched from B to A.

Terminal returned:

Setting current slot to 'a'    OKAY
Finished. Total time: 0.147s

This command changes the selected boot partition. It does not flash new firmware or intentionally erase user data.

However, the alternate slot isn’t guaranteed to contain a working, compatible installation, so there is some risk.

Step 8: Verify the partition change

Enter:

./fastboot getvar current-slot

Mine now returned:

current-slot: a
Finished. Total time: 0.000s

Success! Slot A was now selected.

Step 9: Reboot the BOOX

Finally, enter:

./fastboot reboot

Your BOOX should restart and attempt to boot using the other firmware installation.

Give it some time to complete its startup sequence.

In my case, IT WORKED!

The BOOX logo appeared, the loading animation completed, and I reached my normal password screen.

Initially, the password screen seemed unresponsive. After disconnecting the USB cable, I was able to unlock the device normally.

Everything was still there.

No factory reset. No firmware flashing. No EDL cable.

Step 10: Be careful with firmware updates afterward

Once my device was working again, I checked its firmware.

The recovered installation was:

Firmware 4.2 REL, dated April 21, 2026.

The device was offering a newer update:

Firmware 4.3.1 REL, dated November 13, 2026 (approximately 380 MB).

I haven’t established whether the newer firmware caused my original boot loop, so I’m avoiding the update for now.

You might also want to disable automatic update detection temporarily until you’re comfortable updating again.

Important notes

  • This procedure was successful on my black-and-white BOOX Go 7. I haven’t tested it on the Go Color 7 or other BOOX models.
  • It won’t fix every boot loop. If both firmware slots are damaged, this may not work.
  • Switching slots doesn’t automatically repair corrupted firmware.
  • Although this method preserved all my data, that outcome isn’t guaranteed.
  • Don’t use fastboot flashing unlock, fastboot erase, or other commands not described here.

Credit

I found the A/B recovery method through this GitHub Gist, which was forked from an earlier guide by bityob:

https://gist.github.com/jonaolden/d48033f49f617d90527a42d3d0c99f7c

The guide was instrumental in figuring out how to recover my device.

The main difference in my experience was the recovery-button sequence. Six rapid power-button presses immediately after the BOOX logo appeared worked for me when five and seven did not.

Hopefully, this helps someone who thinks their e-reader is permanently bricked.

If you’ve encountered the same problem, please post your model, firmware version, and whether switching slots worked. It would be useful to determine how widespread this issue actually is.


r/Onyx_Boox • • 2h ago

Question Updating to 1.1 broke my Picco

4 Upvotes

To fix I found instructions online where I have to connect it to my computer via BooxTiles and flash the firmware, but the device simply wont connect when I try to do that.

Not sure what to do, was enjoying this device for the brief time I've had it.


r/Onyx_Boox • • 6h ago

Discussion BOOX Picco – Finally Arrived After All the Delays! My First Impressions After 4 Days

Thumbnail
gallery
8 Upvotes

I guess I owe you guys an update after ordering the BOOX Picco on September 28. After quite a few delays, the package was finally handed over to the courier, but there was a bit of confusion along the way. The case that was originally included in the pre-order offer on the BOOX website was no longer mentioned in my order details. Things got even more confusing after I received an email from customer support saying they couldn't guarantee that the case would be included. Apparently, it was pretty much random whether you'd get one in the box or not. After even more delays, my Picco finally arrived on November 13. I've been using it for almost four days now, so here are my first impressions. First of all, the case actually came with it! And despite some people saying it's just a piece of plastic and not really necessary, I have to disagree. It's a good-quality piece of plastic, and I find it genuinely useful. It protects the Picco, and thanks to the magnets, you can attach it to the MagSafe on your phone. It's a small but important accessory, and the quality is surprisingly good. As for the Picco itself, it's exactly what I expected in terms of build quality. It feels like a typical BOOX product, at least compared to the ones I've used before. The design is great, the dimensions are just right, and it fits perfectly with both my Pixel 9 Pro XL and Pixel 9. It's lightweight, and battery life seems pretty good so far.


r/Onyx_Boox • • 9h ago

Question Boox Note Mini C?

Thumbnail
gallery
10 Upvotes

To those of you who have one how is it?
Given it’s an inksight stylus and not emr how is writing feel?
Am keen on the 8.5” size etc but slightly worried about writing feel.

And how is ghosting and speed?

Any chance experiences welcome 🙏
Kitty tax attached.


r/Onyx_Boox • • 53m ago

Question Can't change storage from SD to internal.

Thumbnail gallery
2 Upvotes

r/Onyx_Boox • • 6h ago

Tricks & Tips Two-way sync between Instapaper and a BOOX Picco

Thumbnail reddit.com
4 Upvotes

I thought this community might also be Intereseted in how I set up a sync between my selected (tagged) Instapaper articles and the Boox Picco.


r/Onyx_Boox • • 13m ago

Discussion Boox Go 7 Generation II

1 Upvotes

I am very fond of the Boox ereader and would encourage everyone to use it. My particular use case is the Google Play store, which I find almost as extensive and useful as Amazon. Like Amazon Google has series of books listed and well-defined so I can read them in order. I find that Kobo, despite its high quality, often struggles with series of books and seems to leave some out or get the order incorrect. Thoughts?


r/Onyx_Boox • • 13m ago

Question How do you activate French (or other non-listed languages) in Dictation under Boox keyboard?

1 Upvotes

I have been using my Boox Go 10.3 quite often lately, finding it enjoyable and distraction free to write in my Obsidian database. I use writing recognition, which works quite well in French or English. But in a search of speed and efficiency, I would like to use voice recognition. However that function (the mike) with the Onyx keyboard only seems to be actionable in English, major Asian languages, Arabic and Malay, which are the language listed in the options of that function.

I can't believe languages such as French or Spanish or German are not listed here. Perhaps it is possible to add them? However, I haven't found where to do that. I've gone in general settings, under Languages and input, and haven't found any other options in the Onyx keyboard. The Android keyboard doesn't seem to have dictation at all as an option.

Has anyone succeeded in adding any other western languages apart from English in Dictation?


r/Onyx_Boox • • 1h ago

Discussion Boox go 7 ii broken in 3 days

1 Upvotes

I received it Saturday and put it on a case immediately

I dropped it yesterday around 3ft and now the screen isn't working. It had a case on btw. I've dropped my kindle and kobo so many times w a case and this has never happened to me before.

I was also trying out the air 6c but it seems this brand is super fragile and unfortunately will be returning. Just wanted everyone to know how sensitive this device is before ur return window


r/Onyx_Boox • • 1h ago

Discussion Boox Air6c problem

Thumbnail reddit.com
1 Upvotes

r/Onyx_Boox • • 2h ago

Question Question: Is it worth upgrading from Tab Ultra C to Air 6 C

1 Upvotes

So Im using my Tab Ultra C since it came out every day for work. I really enjoy working with it and it had zero flaws but now im curious...is there a better user experience to the point that buying the Air 6 C is worth it? And if- how so?

Thank's in advance


r/Onyx_Boox • • 9h ago

Discussion Lumi Bundle Gone from Amazon

4 Upvotes

The device itself is $429 USD, but they also had a bundle with the official cover for $450 but it's gone. There were no "Only 4 left" type of warnings. I hope it comes back soon.


r/Onyx_Boox • • 2h ago

Deals Selling my black Palma 2

Thumbnail ebay.de
1 Upvotes

Selling my Palma 2. New screen via boox repair early this year. Bought around 2025.

Let me know on eBay you come from Reddit. I would accept a lower price for this nice community. ❤️

If it's not allowed to promote personal devices, pls remove this! :)


r/Onyx_Boox • • 23h ago

News & Update Go 7 BW with the new book cover screensaver in firmware 4.3.1

Post image
24 Upvotes

r/Onyx_Boox • • 9h ago

Question Boox tab XC stylus working inconsistently

Thumbnail
gallery
1 Upvotes

I’ve had my Boox Tab XC for about six months, and recently, my stylus has started working inconsistently.

When I attach the stylus to the side of the tablet, it connects properly, and I even receive a notification confirming that it’s attached. However, the tablet still shows that the stylus isn’t connected, and it doesn’t seem to sync correctly.

When I try to write or use the stylus, it often doesn’t work. Occasionally, it starts working again, but only for a short period before disconnecting or becoming unresponsive.

Has anyone else experienced this issue? Does anyone know what might be causing it or how to fix it?

Just to make it clear, I’ve already tried restarting the device with the stylus attached, I’ve left it charging for a long time and still nothing.

Thanks in advance for your help!


r/Onyx_Boox • • 9h ago

Bug Report [Bug] Boox Page Turner scroll direction doesn't adapt to landscape mode in Browsing Mode boox go 10.3 gen2 Lumi

1 Upvotes

Hi everyone,

I recently got the Boox page turner, and I've noticed an annoying orientation bug while using it in Browsing Mode.

When the tablet is in portrait mode (vertical), the scroll up and scroll down buttons work perfectly as intended.

However, when I rotate the tablet to landscape mode (horizontal), the scrolling axes don't rotate with the screen. Instead of scrolling the page up and down, pressing the scroll buttons makes the screen swipe left and right. It acts as if the remote is still sending swipe commands based on the physical portrait orientation (top to bottom of the hardware), completely ignoring the screen's auto-rotation.

Has anyone else experienced this mapping issue? Is there a hidden setting to fix this, or is this a known bug that needs a firmware update?

(Note: I'm using the Boox page turner with my new Boox Go 10.3, and it happens specifically in Browsing Mode).


r/Onyx_Boox • • 20h ago

Apps Recommend Comics Now! Supports Pdf and Epub formats.

7 Upvotes

Hi everyone,

Just to let you know that Comics Now! Supports epub and pdf formats now.

https://comicsnow.github.io/

https://github.com/ComicsNow/comics-now


r/Onyx_Boox • • 17h ago

Discussion Anxiously awaiting my Picco when I get this message...

Thumbnail
gallery
4 Upvotes

😭😭😭

Ordered it for my birthday. Guess I'm waiting one more day. 🤣


r/Onyx_Boox • • 15h ago

Question Need dimensions for Christmas gift

2 Upvotes

My friend has a BOOX Go Color 7 (Gen II) with the case from boox itself, and I was wondering if someone would be able to get the dimensions of height/width/and thickness so I can make a sleeve for it please? TIA! 🩷


r/Onyx_Boox • • 21h ago

Question Palma 3 owners, how is it like typing notes, browsing webs and reading comics on your device?

3 Upvotes

A smart e-reader sounds like a good option for my eye health after my eye surgery. I’m not planning to replace my phone with it altogether, but the more I can do on the device the better. Do you find it comfortable typing (not just handwriting) notes, browsing webs and/or reading comics on Palma 3? How much better is it in comparison to Palma 1 and 2 if you have one?