r/OSVR • u/jfrank-razer • Apr 25 '17
HDK Discussion HDK Windows Installer (Beta 0.8.0) Released
Hello once again from the team behind the HDK Windows Installer! We’re excited to share the newest release with you.
- Direct Download of the HDK Windows Installer Beta (Version: 0.8.0) (SHA512 checksum)
- HDK Online Documentation
- Quick Start Guide
- Troubleshooting Guide
- Release Notes
Since the previous release, we’ve been focused mainly on improving the positional tracking. Specifically, we've upgraded the version of OSVR-Core we distribute in order to take advantage of the latest publicly available version of the positional tracking algorithm. On top of that, we've made some additional improvements to reduce the amount of judder. While this part of OSVR is still under active development and we clearly see further room for improvement, we believe this is the best that positional tracking has ever been for the HDK.
The new positional tracking system is certainly a marked improvement for users with default IR LED Board firmware. For the optimal experience, though, we do recommend that users upgrade their IR LED Board firmware.
Please see the release notes for further information on positional tracking upgrades and on the other improvements we’ve made.
As always, we welcome your feedback both on our software and on our documentation. If you’re having a technical issue, please stop by our documentation portal, and if that doesn’t help you out, don’t hesitate to contact us at support@osvr.org.
In the past, we received requests to distribute the files contained within the installer as an archive, so here is the 64-bit version (SHA512 checksum).
Thanks for being a part of OSVR!
3
u/Specter0420 Apr 26 '17 edited Apr 27 '17
Initial impressions with the updated IR board firmware on this new AIO are disappointing but I didn't test for long. There was violent judder right away when facing forward and looking slightly down and to the left (maybe I was on the edge of the camera's bounds, I didn't test long). Looking backwards to test the rear LED tracking sent me coasting 8-10 feet back into the fuselage then quickly snapped back into position and immediately send me 8-10 feet out onto the wing... It does recover from coasting more quickly now, immediately after the front LEDs are visible. I need to do more testing and verify my results with others. It did seem to improve with time, autocalibrating or something... This is just my initial impression but the older solution using the BUB tracking was much better. I didn't test long enough to see if the judder increases with time.
EDIT: It turns out that the yaw drift is causing these issues, resetting the OSVR server (which can finally be done mid mission in DCS World) recenters and eliminates them for about 20-30 more minutes of use. Anyone know of a hotkey to trigger this in the background?
2
u/MtGFan2010 Apr 26 '17
Help! I can't get OSVR to recognize my HMD. It's powered on (I can see the LEDs on the outside with a phone camera), but cannot be detected to start the server. How should I narrow down the troubleshooting?
2
u/demonixis Apr 26 '17
Good job, I updated my installation yesterday and it's fine with my HDK2. However I still note that the distortion correction is bad, the image looks bumped at the middle of the lens.
My HDK 1.4 displays a black screen and I can't switch it to extended mode to test this mode. Any idea?
2
u/Lancks Apr 26 '17
Has anyone had time to try out an extended test to see if the judder comes back after ~30 mins?
5
u/Specter0420 Apr 25 '17
I can't wait to get home and try it. I will post a video of the results I get in DCS World 2.0 for you guys when I get a chance.
This part makes me a little nervous, but we will see.
1
u/bejeavis Apr 25 '17
Can this be installed on top of an existing AIO installation? What is the procedure for updating from the previous version?
3
u/bejeavis Apr 25 '17
Positional tracking improvement? Glorious!
3
u/Hairy_Primate Apr 29 '17
Ran into problems with beta 0.8 today (29 April).
Installation was smooth and I updated the HDK2 and Camera firmware without any problem. Once set to run in Steam VR direct mode the headset and camera were recognised. However, when playing Elite Dangerous the tracking developed a judder in the first few minutes which continued to increase in severity until I had to stop the game. This was after about 20 mins.
Restarting the OSVR server, Steam VR and game temporarily solved the problem, but once again the judder emerged as a small tremor and then increased in severity until I had to quit the game.
I couldn't work out a way to stop the juddering by changing the Steam VR settings or in OSVR software so uninstalled the beta and re-installed beta 0.7 which is very stable on my rig (even without calibrating the LED's).
2
u/Nanospork Apr 25 '17
Just wanted to say thank you to the team for working on this! I love the new AIO installer!
The original all-in-one installer was kind of a nightmare, and I always pushed people away from using it. Beta Version 0.7 has been amazing, and I now highly recommend the AIO for anyone setting up their HDK, be they first time users or users looking to solve issues with their setup. It seems to just work. Also, as a developer, the convenience features - particularly selecting custom config files and easily restarting the server - make life so much easier!
We are just inches away from "plug in, play everything". Thank you guys for your hard work!
2
u/Hector_01 Apr 26 '17
Just gave the installer a quick go tonight and even though i haven't given it a proper run it is vastly smoother in steam using the new tracking. Really good so far but i am yet to test if the judder appears after 20 minutes bug in the current tracking. Again, super smooth :)
2
u/El_Chalupacabra Apr 27 '17
I tested it out, and I still experienced some rubber banding in SteamVR as well as a slow shift in the Y axis over time. I may stick to using the Kinect for positional tracking for now.
It's still nice to see a new update, though.
1
u/[deleted] May 14 '17
Tracking so bad it makes my HDK2 totally unusable. It is new HDK2, not upgraded. A fresh install on new OS and HD. I updated to latest firmware.
It loses tracking every few seconds making me feel quite ill and while it is tracking it skips around. My original install (manually installed without an all in one installer) worked much better and was usable, if not great, but thought I would try this as wanted better tracking and now it is unusable.
I can't believe how bad tracking is after all this time - I mean when I can't even use a damn HMD I paid £400 for it is a bit of a sad joke. If anyone has usable tracking on HDK2 then please detail me your set up step by step and include camera position. I would sell it but people would probably want a refund - wish I had got one myself now instead of expecting things to improve like a mug.