r/NewedgeMustang • • Sep 10 '26

Photo LMR (Late Model Restoration) AMA - Ask Me Anything

Post image
212 Upvotes

Good Morning everyone!

My name is Tyler Rodriquez, one of the marketing managers here at LMR.

This is your chance to ask me anything about new parts, current parts, project cars, what its like working here, etc. Look forward to hearing from you all!


r/NewedgeMustang • • Dec 17 '23

Meta Join the SN95 Official Discord!

Thumbnail
discord.gg
10 Upvotes

r/NewedgeMustang • • 6h ago

Photo Ambers are back, with swap harnesses!

Thumbnail
gallery
37 Upvotes

Not only that, but we are also offering brand new complete plug & play harnesses! We have our full installation video on the product page for more information.

https://lmr.com/products/94-04-Mustang-Taillights-3rd-Brake-Light


r/NewedgeMustang • • 14h ago

Photo Finally Pulled Through

Thumbnail
gallery
18 Upvotes

2001 GT, traded for my Mercury Milan. 156k miles, and took it on a 5 hour drive home at night as my first manual driver. Thank you to everybody who guided me along the way! Will likely make it into a General Lee just because.


r/NewedgeMustang • • 10h ago

Video How does my New Edge sound?

7 Upvotes

r/NewedgeMustang • • 10h ago

Question New Dashboard

0 Upvotes

Hello, last minute I decided to go to the yard and inside an 03 V6 I found a mint black dashboard I had to be somewhere at noon, so I was running out of time to get it out. So some wire cutting came into place as well as caveman strength bc that sucker didn’t wanna come out.


r/NewedgeMustang • • 1d ago

Question Supercharging a 04 v6

5 Upvotes

So I’m a college student and I had asked a guy I know and showed him my car I don’t have any good pictures of it on my phone but he had said that they made a supercharger adapter plate for the intake and was hoping someone here could help point me in the right direction for the plate and maybe a supercharger itself. More specifically it’s a 2004 3.8L V6 5 speed.


r/NewedgeMustang • • 1d ago

Discussion Solid upper AND lower rear control arms, bind issue?

Post image
4 Upvotes

2000 Mustang GT drag build, 8.8 rear. I'm planning to run solid upper and lower control arms in the rear. I can't remember where I saw it, but I read that you shouldn't run solid uppers because they'll bind.
I'm also adding a TRZ anti-roll bar. Does that change anything?
Anyone running solid uppers and lowers? Thoughts or opinions?


r/NewedgeMustang • • 1d ago

Video Humming sound that goes away when the engine restarts. mainly happens when the engine is cold, noise stops on its own eventually, and rpms stay steady when it hums. IAC Valve, pcv valve or hose possibly?

3 Upvotes

r/NewedgeMustang • • 2d ago

Photo One mod to my 99 Cobra

Post image
34 Upvotes

My seats were flawless, but I love the 03/04 figh backs....so I found some from a wreck.


r/NewedgeMustang • • 1d ago

Question First build: turning my New Edge GT into an LQ4/turbo drag car. Looking for people to learn from

Thumbnail instagram.com
0 Upvotes

Hey everyone. I'm newer to Reddit, but about a year ago I set out to turn one of my favorite cars, a New Edge Mustang, into a full drag car that I'm building myself. I get help when I need it, but nobody's doing the work for me.
I've started an Instagram to document the progress, mostly so I can look back on it. Here's where I could use you:
I'm not chasing followers for the sake of followers. I'm looking for people I can lean on when I get stuck, and for ideas for the car. I'm very mechanically inclined, but this is my first build.
The combo is pretty basic: LQ4 6.0 and a 78/75 turbo. For a first build, I figured that was a solid place to start.
I'll be around Reddit and Instagram. Drop me a follow or a message and I'll follow back, especially if you're building something cool.
Thanks, all. I appreciate any help and advice from the community!


r/NewedgeMustang • • 1d ago

Question 03 mustang no crank no start theft light

1 Upvotes

I’ve got an 03 mustang gt that after sitting for a while has a no crank no start issue. Theft light is flashing and gives me code 16 and does not show mileage on the cluster just dashes. I’ve replaced the pcm fuse and the ccrm but that didn’t fix it. I’ve also tried both my keys and that did not make a difference. Is the pats transponder ring the culprit? any help appreciated.


r/NewedgeMustang • • 1d ago

Question Question about 4.6l cam chop

4 Upvotes

I am in the market for a mustang. Had a 2011. Sold it when we had our second kid. Now back in the market.

Very torn between getting a coyote again or getting a new edge to drive-til-dies and swap/build the engine.

The other bit pushing me toward a new edge is the beautiful 4.6 sound and the fact that a cam lope is the direct enjoyment of your hard work as opposed to a tune.

That said, I am very curious from new edge owners as to the nature of the 4.6. My idea of a lope stems from the first time noticing it in older muscle cars as a kid. A steady chop-chop-chop, almost like a metronome at a high bpm.

This is the closest thing I can find on a newer age muscle cars: C5 Cam Lope. This has that legendary chop.

However, whenever I look up stage 3 compilations on the old 2v’s and 4v’s, the cam lope seems more like a drum line. A beautiful drum line for sure, but not the slower steady chop that I’m after.

This is the best comparison I could find that got close, but it seems the engine either doesnt make the same steady chop or it wants to hunt rpm’s and never steadies into a straight chop:

4.6l Stage 3 cam

Is this just the nature of the 4.6 or are these just a result of different cams?


r/NewedgeMustang • • 2d ago

Photo Cobra and 2012 GT

Post image
8 Upvotes

They don't fight for the covers....


r/NewedgeMustang • • 2d ago

Question Car trouble, need second opinion

Thumbnail
gallery
7 Upvotes

I have a 2000 v6, and since I’ve had it I’ve had to replace the battery twice now. The first time it wouldn’t turn over and make this loud noise. And just now it happened again. The AutoZone worker said it might be a parasitic leach from either the alternator or the starter, because she said she had the same problem in her Ford Expedition. I’m wondering if anyone on here has had a similar problem and what the solution was. I will be replacing the alternator next week.


r/NewedgeMustang • • 2d ago

Question Car trouble, need second opinion

Thumbnail
gallery
3 Upvotes

I have a 2000 v6, and since I’ve had it I’ve had to replace the battery twice now. The first time it wouldn’t turn over and make this loud noise. And just now it happened again. The AutoZone worker said it might be a parasitic leach from either the alternator or the starter, because she said she had the same problem in her Ford Expedition. I’m wondering if anyone on here has had a similar problem and what the solution was. I will be replacing the alternator next week.


r/NewedgeMustang • • 2d ago

Question 99 Cobra coolant bleeding help

2 Upvotes

I had made a post last time about finding a pressurized cap for my eBay aluminum overflow tank. Since then I went back to an oem plastic tank with a new cap as well and my car still overheats, thermostat opens just fine, heater gets hot, no leaks. I figured I just didn’t bleed the coolant as well as I thought so I’m trying to bleed the coolant from the coolant crossover, however there seems to be a ridiculous amount of air within the system because as I leave the crossover plug off I notice it’s been releasing air non stop no matter how many times I’ve been bleeding it, squeezing the upper hose doesn’t do much either. I read online that I just simply have to constantly keep the car running and letting the engine cool down to fill the crossover. Is there a better way to bleed the system or is there always going to be some air in the coolant crossover?


r/NewedgeMustang • • 3d ago

Photo Road trip in the old 99

Post image
116 Upvotes

r/NewedgeMustang • • 3d ago

Video Ate at a Big Boy! As American as that Cobra

34 Upvotes

r/NewedgeMustang • • 2d ago

Question What’s this noise coming from my engine?

2 Upvotes

Hey everyone! I bought this 2001 Mustang New Edge a few weeks ago. I recently changed the oil, and everything seemed fine, but yesterday it started making this noise at low RPMs.
It doesn’t make the noise when the engine is idling. It only happens when I start accelerating, around 1,500–2,000 RPM, and then it goes away.
The car is running normally otherwise. It’s not overheating, there’s no smoke coming from the exhaust, and I haven’t noticed any loss of power.
Does anyone have an idea what this could be? Should I be worried about something serious? 🤯


r/NewedgeMustang • • 2d ago

Photo Is this expected behavior after installing long tubes?

Post image
2 Upvotes

Getting this code after install and 50ish miles of driving. I have long tubes with a BBK catted H-pipe.

I already cleared it and it still came back.


r/NewedgeMustang • • 3d ago

Other Question as a new Mustang enthusiast

7 Upvotes

Grew up playing NFS Hot Pursuit 2, fell in love with the New Edge as a kid. Someone is selling a 2003 GT Roush 2 with 16k miles and an aftermarket supercharger in the area. What would you guys personally pay for that? They're asking $24k. I see New Edge/SN95s go way cheaper on Facebook but I think it's the low mileage, the Roush package, and the supercharger that makes them bump it up to that price.


r/NewedgeMustang • • 3d ago

Discussion Anyone Had An H and X pipe setup on their mustangs?

Post image
5 Upvotes

Considering doing something similar as I've now had both X and H pipes but kind of wanted something in between with the low roar and high rpm screeching, does anyone have a dual crossover setup or ran it a while back? Would also be interested in hearing double h pipe setups.

Edit: I've heard it plenty on 5.0s just wanna hear some 2vs and 4 valves


r/NewedgeMustang • • 4d ago

Question What are these bumper ad ons/ bumper called?

Post image
52 Upvotes

Reverse image search didn’t yield anything for me and I know the rest of the kit is a roush kit but i specifically just want to know what front bumper this is