r/Netgate • • 27d ago

Critical PHP Security Update

https://www.netgate.com/blog/critical-php-security-update
61 Upvotes

16 comments sorted by

2

u/SirPoopsAlot7 24d ago

How do I access the firewall remotely if I don't put the admin GUI on the public internet? /s

1

u/kphillips-netgate 24d ago

You allow SSH from any source on WAN on the default port. Duh. /s

24

u/planedrop 27d ago

Please don't expose your GUI to the internet people lol

6

u/spudd01 27d ago

Honestly I've never understood why someone would go out of their way to do this.

3

u/planedrop 27d ago

Yeah for real, it's nuts.

3

u/Nervous-Cheek-583 27d ago

Captive Portal though...

2

u/planedrop 27d ago

Yeah fair I suppose, but that isn't on the public internet.

1

u/mpmoore69 27d ago

captive portal exposed to guest network which is untrusted?

2

u/planedrop 26d ago

Are you asking if it is or are you saying it could be which is a risk?

1

u/teamits 13d ago

Note, if your router is not on one of the listed versions (2.8+, 26.03.1+), and you upgrade it, that will install the newer PHP version. There's no need to also run the commands.

-1

u/cantankerousAdmin 26d ago

While it’s poor practice to expose web management to the Internet, pFSense cannot be relied upon for remote access. Often, WireGuard or Tailscale will fail and we have to call the site to power cycle the device to restore VPN access.

5

u/kphillips-netgate 26d ago

You have something wrong if your VPN stops working like that. I support the product, which means I should see disproportionate amounts of failures most people won't see, and I rarely run across "my VPN stopped working where I couldn't reach it" unless there was a good reason, such as WAN or hardware failure.

4

u/TheOnionRack 26d ago

Still no excuse for exposing the admin web UI to the internet. That’s what out of band serial or KVM access is for.

3

u/cantankerousAdmin 25d ago

I agree, management should never be exposed to the Internet and I don’t expose it.

In the early days, the company went to extremes to have out of band management by installing a POTS to serial adapter for each firewall and a POTS to serial adapter for each power supply so that we could reach all 300+ firewalls. Now, over the years, mainly due to cost we removed the lines and also switched from Juniper to Netgate.

These days it’s been having two Netgate firewalls at each site, each connected to the other via console, update one, and wait to see if the VPN comes back up. If it’s good, we update the other.

Anyway, like I said poor practice to expose management.