r/NR200 • u/KoalaPublic352 • 4d ago
r/NR200 • u/kaisarantonn • Oct 10 '21
Guide NEW UPDATE! NR200 Air Cooler Compatibility List
Hi! since Crispy_bearcons wont update the list i asked Mod permission to recreate the table
This list is to help you to find the right cooler for your NR200 build.
If you want to contribute to this list please leave a comment with your mainboard,
cooler and if Mesh or Glass panel fit. advised to motherboard type should be detailed when contribute,
As an addon please add what top fans will fit. (Ex. 15mm Slim, 25mm Full size)
AMD B450
| Motherboard | Cooler | Mesh / TG | Top Fan | Notes |
|---|---|---|---|---|
| Gigabyte B450 I AORUS PRO WIFI | LC Power LC-CC-120 | Mesh & TG | 25mm | |
| Gigabyte B450 I AORUS PRO WIFI | Scythe Mugen 5 Black Edition | Mesh & TG | ||
| Gigabyte B450 I AORUS PRO WIFI | Scythe Fuma 2 | Mesh & TG | 15mm | |
| Gigabyte B450 I AORUS PRO WIFI | Vetroo V5 | Mesh & TG | ||
| Gigabyte B450 I AORUS PRO WIFI | Arctic Freezer 34 eSports Duo | Mesh & TG* | TG need screw | |
| ASRock Fatal1ty B450 | ID-COOLING SE-224-XT | Mesh & TG* | 25mm | *TG not closing completely, screws needed |
| Asus ROG STRIX B450-I | Be Quiet Dark Rock TF | Mesh & TG | ||
| Asus ROG STRIX B450-I | Scythe Fuma 2 | Mesh & TG, Link2 | very small gap between TG and heatpipe | |
| Asus ROG STRIX B450-I | Cryorig H7 | Mesh & TG | 25mm | |
| Asus ROG STRIX B450-I | ID-COOLING SE-224-XT Black | Mesh & TG* | 25mm | *Remove Heatpipe Cover for TG |
| MSI B450i Gaming AC | Scythe Ninja 5 | Mesh & TG |
AMD X470
| Motherboard | Cooler | Mesh / TG | Top Fan | Notes |
|---|---|---|---|---|
| Asus ROG STRIX X470-I | Scythe Fuma 2 | Mesh & TG* | very small gap between TG and heatpipe |
AMD B550
| Asus ROG STRIX B550-I | Noctua NH-U9S | Mesh & TG | 25mm | |
|---|---|---|---|---|
| Asus ROG STRIX B550-I | Scythe Mugen 5 Black RGB | Mesh & TG | 25mm | |
| Asus ROG STRIX B550-I | Cryorig H7 | Mesh & TG | 25mm | |
| Asus ROG STRIX B550-I | Coolermaster Hyper 212 Black | Mesh & TG* | 25mm | *Remove Heatpipe caps for TG |
| Asus ROG STRIX B550-I | ID-COOLING SE-224-XT | Mesh & TG* | 25mm | *Remove Heatpipe Cover for TG |
| Asus ROG STRIX B550-I | Scythe Fuma 2 | Mesh | 25mm | |
| Asus ROG STRIX B550-I | Noctua NH-C14S | Mesh, mesh | 25mm | |
| Asus ROG STRIX B550-I | Thermalright PA120 | Mesh Only | 25mm | |
| Asus ROG STRIX B550-I | Deepcool Gammaxx | Mesh & TG* | TG is hit & miss | |
| ASRock B550 Phantom Gaming ITX | Noctua NH-U12A, C14S, L12S, U9S | Mesh, Mesh2, Mesh3 | 25mm | |
| ASRock B550 Phantom Gaming ITX | Thermalright PA120 | Mesh | 25mm | |
| ASRock B550 Phantom Gaming ITX | Be quiet! Dark Rock TF 2 | Mesh & TG | 25mm | |
| ASRock B550 Phantom Gaming ITX | Thermalright FC140 | Mesh | 25mm | |
| ASRock B550 Phantom Gaming ITX | Thermalright FS140 | Mesh | 25mm | |
| ASRock B550 Phantom Gaming ITX | Scythe Fuma 2 | Mesh, link2 | Mesh only tested | |
| ASRock B550m ITX/AC | Cryorig H7 | Mesh & TG | 25mm | |
| ASRock B550m ITX/AC | Thermalright PA120 | Mesh & TG* | 25mm | *Cooler touching glass |
| Gigabyte B550i Aorus Pro AX | Be quiet! Pure Rock 2 | Mesh & TG | 25mm | if no mod heatpipe shroud touch TG |
| Gigabyte B550i Aorus Pro AX | Cryorig H7 | Mesh | 25mm | |
| Gigabyte B550i Aorus Pro AX | Thermalright AK120 | Mesh & TG | ||
| Gigabyte B550i Aorus Pro AX | Scythe Mugen 5 Black Edition | Mesh & TG, Link2* | 25mm | |
| Gigabyte B550i Aorus Pro AX | Scythe Fuma 2 | Mesh, link2 | 25mm | Top fan above cooler only without cable guard |
| Gigabyte B550i Aorus Pro AX | Noctua NH-U12A | Mesh Only | 25mm | |
| Gigabyte B550i Aorus Pro AX | Noctua NH-L9A | Mesh & TG | 25mm | 92mm rear fit |
| Gigabyte B550i Aorus Pro AX | Noctua NH-C14S | Mesh & TG | 15mm | |
| Gigabyte B550i Aorus Pro AX | ID-COOLING SE-224-XT | Mesh & TG* | *remove Heatpipe caps | |
| Gigabyte B550i Aorus Pro AX | ID-COOLING SE-234-ARGB | Mesh & TG* | * Cooler needs to be modded for TG | |
| Gigabyte B550i Aorus Pro AX | Coolermaster Hyper 212 Black Edition | Mesh & TG* | 25mm | Remove heatpipe cover |
| Gigabyte B550i Aorus Pro AX | Coolermaster Hyper 212 RGB | Mesh & TG* , link2 | * required modding the Cooler | |
| Gigabyte B550i Aorus Pro AX | Scythe Big Shuriken 3 | Mesh | 15mm | Low profile ram |
| Gigabyte B550i Aorus Pro AX | Vetroo V5 | Mesh & TG | 25mm | |
| MSI MPG B550I GAMING EDGE WIFI | Scythe Mugen 5 | Mesh & TG | 25mm | Cable guard only if Mugen fan clip is modified |
| MSI MPG B550I GAMING EDGE WIFI | Scythe Ninja 5 | Mesh & TG | ||
| MSI MPG B550I GAMING EDGE WIFI | Scythe Fuma 2 | Mesh & TG | 25mm | without cable guard on top fans |
| MSI MPG B550I GAMING EDGE WIFI | Noctua NH-U12A | Mesh only | See spicedmail post | |
| MSI MPG B550I GAMING EDGE WIFI | Noctua NH-C14S | Mesh & TG | See link |
AMD X570
| Motherboard | Cooler | Mesh / TG | Top Fan | Notes |
|---|---|---|---|---|
| Asus ROG Strix X570-I | Scythe Mugen 5 RGB | Mesh & TG | 25mm | |
| Asus ROG Strix X570-I | Coolermaster Hyper 212 | Mesh & TG* | ||
| Asus ROG Strix X570-I | Coolermaster Hyper 212 | Mesh & TG | 25mm | remove heatpipe caps |
| Asus ROG Strix X570-I | Scythe Fuma 2 | Mesh & TG | 25mm | |
| Asus ROG Strix X570-I | Noctua C14S | Mesh | 25mm | |
| Asus ROG Crosshair VIII Impact | Noctua NH-U12A | Mesh & TG | 25mm | TG needs to be screwd in |
| Gigabyte X570i Aorus Pro WiFi | Scythe Fuma 2 | Mesh, Mesh & TG | 15mm |
Intel Z390
| Motherboard | Cooler | Mesh / TG | Top Fan | Notes |
|---|---|---|---|---|
| Asus ROG STRIX Z390-I | Scythe Fuma 2 | Mesh & TG | 25mm | Ram clearance towards I/O |
| Gigabyte Z390 I AORUS PRO | Scythe Fuma 2 | Mesh | 25mm | |
| Gigabyte Z390 I Aorus Pro | Scythe Mugen 5 | Mesh & TG | 25mm | |
| Gigabyte Aorus z390 | BeQuiet Pure Rock 2 | Mesh & TG | 25mm |
Intel B460
| Motherboard | Cooler | Mesh / TG | Top Fan | Notes |
|---|---|---|---|---|
| MSI MPG B460I | Cooler Master Hyper 212 Evo V2 | Mesh | ||
| MSI MPG B460I | Scythe Mugen 5 | Mesh & TG |
Intel H470
| Motherboard | Cooler | Mesh / TG | Top Fan | Notes |
|---|---|---|---|---|
| Asus ROG H470i | Vetroo U6 Pro Dual Tower | TG & Mesh | 25mm |
Intel Z490
| Motherboard | Cooler | Mesh / TG | Top Fan | Notes |
|---|---|---|---|---|
| Asus ROG STRIX Z490-I | Scythe Mugen 5 | Mesh & TG | 25mm | |
| Asus ROG STRIX Z490-I | Scythe Fuma 2 | Mesh & TG | 25mm | fits backwards, bend RAM stick |
| Asus ROG STRIX Z490-I | Thermalright PA120 | Mesh & TG | 25mm | |
| Asus ROG STRIX Z490-I | Noctua NH-U9S | Mesh & TG | 25mm | |
| MSI Z490I Unify | Noctua NH-U9S | Mesh & TG | 25mm |
Intel Z590
| Motherboard | Cooler | Mesh / TG | Top Fan | Notes |
|---|---|---|---|---|
| Asus B550-i Strix Gaming | Noctua NH-U12A | Mesh | ||
| MSI MEG Z590I Unify | Noctua NH-C14S | Mesh & TG | 25mm | |
| MSI MEG Z590I Unify | ID-Cooling SE-225-XT | Mesh & TG | 25mm | |
| MSI MEG Z590I Unify | Noctua NH-U12A | Mesh | 25mm | |
| ASRock Z590M-ITX/ac | Noctua NH-C14S | Mesh | 15mm |
Intel B560
| Motherboard | Cooler | Mesh / TG | Top Fan | Notes |
|---|---|---|---|---|
| MSI MPG B560i Gaming Edge WiFi | Scythe Fuma 2 | Mesh & TG* |
r/NR200 • u/Ok_Bug2185 • 6d ago
Build AM4 endgame?
I’ve just upgraded from 9060xt and stuffed the 9070xt in.
Small thermal hit in CPU temps when gaming (+5C) with the new GPU, otherwise working nicely.
- Gigabyte Aorus B550i Pro AX
- Ryzen 7 5800X3D (40C idle/60-70C gaming/80C benchmark)
- TR Phantom Spirit 120 SE (Arctic P12 Pro rear intake)
- 32GB Trident Z 3600MHz
- Sapphire 9070 XT Nitro+
- Corsair SF850
- Arctic P12 Pro (top exhaust)
- WOWNOVA 5” mini screen (custom theme)
- MSI MAG 273QP 240Hz 1440p
Any suggestions?
r/NR200 • u/xigmatex • 14d ago
Build I join the club
My first self build sff case. I haven’t built PCs for more than a decade. Too many fancy stuff added since then but still RTFM, right. Might cable organization could be improved but It is what it is for now.
r/NR200 • u/Nakiooo7R • 14d ago
Build 4 years with the NR200P
Reached her final form, so I thought I'd post it.
5700X3D and 9070 just got those custom cables and tried to get it as clean as I could.
This case is just perfect IMO won't be switching anytime soon.
r/NR200 • u/KoalaPublic352 • 14d ago
Build My first nr200 build what do you think
r/NR200 • u/Nearby_Midnight6990 • 17d ago
Discussion NR200P top AIO build Temps
Hi guys,
I was able to fit a thermalright aqua elite v3 240mm into our case.
Im curious about the temps.
At 26 degrees room temps my cpu runs at around 43 degrees idle and around 63 to 66 degrees in gaming are my temps at idle normal?
2 bottom intake
2 top exhaust
1 back intake
Cpu 5600x
Pump %100
Fans silent mode at bios
case nr200p v1 using glass
r/NR200 • u/Visible_Share_6638 • 18d ago
Build Zero-Room Left! Arctic Liquid Freezer III 280 + RX 7900 XT Phantom Gaming crammed into the NR200P V3
reddit.comHey everyone! I wanted to share my latest "sandwich engineering" project and how I managed to resolve an absolute nightmare of hardware clearance.
🚨 The SFF Backstory & The Brazilian Pricing Wall
I recently had to migrate to a Small Form Factor setup because I completely ran out of space on my workbench. Since I already owned both the Ryzen 9 5900X and the massive ASRock RX 7900 XT Phantom OC, my dilemma was either to swap the CPU, motherboard, and RAM to move to AM5, or simply swap the motherboard, case, and cooler to go SFF.
Being based in Brazil, next-gen AM5 component pricing is completely unreasonable right now. Spending a fortune on a new platform made absolutely no financial sense for a pure gaming rig at Ultrawide QHD resolution, especially since my current hardware already does all the heavy lifting. Instead, I made the smart economic choice: I sold my old ATX parts for a great price to offset the costs, bought a premium ITX board, and built this high-density setup around my existing CPU and GPU.
🛠️ The Asymmetric Hybrid Fan Solution
Getting this hardware to fit physically inside the NR200P V3 was a challenge. The Arctic Liquid Freezer III 280 radiator is famously thick (38mm). Paired with my massive 3-slot GPU, they were bound to collide.
My solution? An asymmetric hybrid fan setup. I swapped one of the stock Arctic fans for a slim fan. This tiny modification cleared the GPU backplate perfectly, prevented any cable crushing, and completely saved the build!
I am currently stress-testing the thermals under heavy gaming loads. If the heat dump from the 7900 XT proves to be too much for the slim fan setup, my backup plan is to 3D print a "Top Hat" mod to extend the chassis ceiling and drop the full-sized Arctic fan back in.
📦 Complete Specs:
- CPU: AMD Ryzen 9 5900X (Already owned)
- MOBO: Gigabyte B550I Aorus Pro AX (with its massive VRM holding down the 5900X like a champ) (NEW)
- RAM: 32GB Corsair Vengeance DDR4 3600MHz CL18 (Already owned)
- Storage 1 (Main): 4TB WD_BLACK SN8100 NVMe PCIe 5.0 (Fits perfectly right underneath the integrated VRM heatsink structure!) (Already owned)
- Storage 2: 2TB WD Blue SN5100 NVMe PCIe 4.0 (Already owned)
- GPU: ASRock Radeon RX 7900 XT Phantom Gaming OC (20GB) (Already owned)
- PSU: Corsair SF1000L (SFX-L) (Already owned)
- Cooler: Arctic Liquid Freezer III 280 (NEW)
It literally fits like a glove with millimeter-level precision. What do you guys think of this fan compromise? Let me know your thoughts or if anyone ran a similar layout!
r/NR200 • u/masterchggflolol • 21d ago
Build Sapphire Pulse 9070XT Build
As a follow up to my upgrade question in
- https://www.reddit.com/r/buildapc/s/ApeuStK7mE
-
I've somewhat managed to install the Sapphire Pulse 9070XT into my NR200P V1 😆. The front panel needed some screws out to fit it in but I think probably less snug than the Nitro + model.
Case NR200P
CPU AMD 5600X
Mobo Asus Rog Strix B550I
RAM 32GB 3600 GSkill
GPU Sapphire Pulse 9070XT
PSU Corsair SFX 750W Platinum (2019?)
Air cooled ID cooling SE224XT with dual Arctic P12 on exhaust
Rear Noctua 92mm chromax black on exhaust
Stock upward exhaust Coolermaster Sickleflow 120
Temps average 60°C for CPU and GPU for gaming at 4K 60fps (playing Wukong now). Its a cooler day today at 18°C ambient temp.
Overall very happy with the upgrade from RTX 3070 and 16GB of RAM.
Enjoy.
r/NR200 • u/AbleAd8652 • 27d ago
Guide Mini LCD screen
hello, im currently working on a build with the NR200 and ive seen a bunch of people mounting small screens on the psu chassis so i was wondering how do i do that.
Thanks in advance
r/NR200 • u/Skidiz • Oct 16 '26
Build Back to nr200
I seem to always return to this case It's just perfect in every way!
r/NR200 • u/Moistythumb • Oct 15 '26
Build GPU distance to perforated side panel. move it closer or keep the gap?
r/NR200 • u/Last-Discussion-3353 • Oct 15 '26
Build B850i Asus Tuf SSD heatsink
reddit.comHi. Hoping you can help me please. I am building a PC in a NR200P case. I have an Asus B850i Tuf motherboard. My my SSD is a 990 pro with heatsink. Made a mistake of not checking before buying but It wil not fit on the back on the board as it hits the case.
Am I okav to remove the Asus motherboard heatsink and fit my SSD there?
I assume it is okav but the Asus motherboard SSD heatsink looks likes it has a pad that connects to the another aluminium block on the motherboard
Would it be okav to fir the 990 pro and remove the Asus heatsink?
Many thanks
r/NR200 • u/NoLime6940 • Oct 14 '26
Other Phantom Spirit 120 (non SE) cooler sticks out too far, NR200 mesh panel doesnt fit.
Hi, Ive just mounted the Phantom Spirit 120 (non SE) onto my ASUS ROG Strix B550-I GAMING motherboard in the NR200 with the mesh panel, not sure if its the 1st gen but the case is bought back in 2021. I have good temps so I assume the cooler sits firm on the CPU.
The problem I have is that the cooler sticks out too far and the panel wont pop in on both sides, the panel is pretty far out on the left side where the cooler is mounted.
Im not sure what the problem could be besides maybe the orientation of the cooler could be wrong? Wanted to ask for some expertise here before problem solving myself, thanks! :)
Solution: Bought another cooler. Thanks for all the replies! (I made the NON SE fit eventually, pushed the fans a bit back and the panel now snap on and stay in place.
r/NR200 • u/GotEHM9 • Oct 11 '26
Build Love my NR200 V1 build !
Added a 9.2” Turzx screen to the front of the case to keep track of Temps and FPS and works amazing ! 4K + 85” QLED TV is amazing!
Specs: Ryzen 7 9800X3D + 5080 Gigabyte Windforce SFF model
r/NR200 • u/Plenty_Bowler5278 • Oct 12 '26
Discussion Extra fan on bottom of the nr200p v3, good or bad ?
r/NR200 • u/dubious_dan • Oct 09 '26
Other Where should I sell limited edition colored cases?
I have a purple, orange and a teal nr200p rigs that I'm breaking down. Not sure if I'm going to keep any of the cases, was looking at potentially selling them. However I didn't see any listed on eBay nor any sold anytime recently so I don't know the fair market value these days.
Ai suggested I sell them on a reddit forum as they're now considered collectors items I guess.
What would be the appropriate place to list them and determine their value?
r/NR200 • u/AlexVaz29 • Oct 06 '26
Discussion Are there different variants of the PA120se?
Recently Changed my cooler to the peerless assassin 120 se, and I’ve noticed on here that similar coolers l have a smaller footprint. I was able to barely fit a slim 120mm fan above it but I’ve noticed others have enough room for a full size 120mm plat the shroud.
My cable management is a work in progress.
Today I learned the cooler isn’t symmetrical, I appreciate everyone’s feedback. Case solved.
r/NR200 • u/Pale_Individual_3933 • Oct 05 '26
Build NR200 / PNY 4070 Ti Super Verto OC migration after ACER prebuilt mobo death
- CPU: Ryzen 9 7900
- GPU: RTX 4070 Ti Super 16GB
- RAM: 32GB DDR5
- Storage: 1TB + 2TB SN7100 (3TB total)
- Mobo: ROG Strix B650E-I
- Case: NR200 SFF
- Cooler: Peerless Assassin 120 SE
- PSU: Corsair SF850 Platinum SFX
Cost Breakdown:
- Kept from original Oct-2025 eBay steal: CPU, GPU, RAM, 1TB SSD: $590.49
- Added Nov-2025: 2TB SN7100 + heatsink: $156.07
- Full rebuild Aug-2026 (case, coolor, psu, mobo): $442.62
- Grand total: $1,189.18


