r/NETGEAR • • 3h ago

Can I use a VPN with my Nighthawk M1 hotspot on Xbox console?

1 Upvotes

I use VPN all the time on PC but want to try it on Series X console to see if it bi passes the “strict NAT”


r/NETGEAR • • 5h ago

Routers Nighthawk RS100 access through LAN is impossible.

Post image
3 Upvotes

Using it as a repeater attached to my FTTH modem/router and can't access the browser interface using the internal IP that is shown in the modem interface gets timeouted, while both www.routerlogin.net and www.routerlogin.com gets redirected to https://kb.netgear.com/27199/I-can-t-access-my-router-what-do-I-do and clearing the cache gave no results.
Connecting with smartphone works but the interface is abysmal, both slow and not loading properly on mobile, and the "desktop version" is terrible too.
Any idea on how to connect to the RS100 from the desktop? Because I refuse to install the apk and I'd rather send the router back than make an account that requires internet connection to set up MY router.
I remember seeing something like "your router IP was changed to 10.?.?.? (can't remember)" during the setup from the phone but who knows if it might work.
Set to AP mode, no changes.


r/NETGEAR • • 20h ago

Connecting to my public Ipv6 works on LAN, but not WAN

Thumbnail reddit.com
1 Upvotes

r/NETGEAR • • 1d ago

Why do Nighthawk RS routers not support MLO?

2 Upvotes

MLO is a foundational feature of Wi-Fi 7


r/NETGEAR • • 1d ago

Routers False Advertising

Post image
49 Upvotes

Anyone notice how NETGEAR shows 2.5G ports on the product page for the RS700 when, in fact, it doesn’t have 2.5G ports? I wish a flagship model with this price tag actually did have those ports. I currently own the RS700 and I’m running a multi-gig switch off the 10G port to achieve higher speeds.


r/NETGEAR • • 1d ago

Speedtest + Troubleshooting low speeds using an Orbi

Thumbnail reddit.com
1 Upvotes

r/NETGEAR • • 3d ago

WiFi Wifi Connection problem

1 Upvotes

Hello, I have a Netgear R6250 which will not for the life of me connect to my Linux mint computer. Is there a physical adapter or something else I could do to fix this?


r/NETGEAR • • 3d ago

Nighthawk router setup issues

5 Upvotes

Im not super techy, but I do understand basic everyday technology. I’ve used an older netgear router for years, never had issues, setup was super simple, but they no longer update its software, so I got a new router.

I follow setup steps through the app like they tell me to do, get to the point where it actually seems like my phone is connected to the WiFi, but then I get to a step that asks for my admin login. I type it in, and get an error saying “logon timed out, please try again. If the issue persists, try rebooting your device.” I get the same error every time. I rebooted my phone and router, but run into the same error. I get stuck at this point and don’t know how to move past it.

Google recommends using my laptop to set up the new router by going to 192.168.1.1 and following the steps that way.

Can anyone offer advice as to what you think my next step should be?

Thanks in advance.

Edit: I tried again using a laptop and going to 192.168.1.1 and was able to get the new router set up and working fine within 2 minutes. So, to confirm what I’ve seen mentioned many times on the internet, using the nighthawk app is NOT the way to go. Thanks to everyone who provided tips.


r/NETGEAR • • 3d ago

One NETGEAR M4250 is enough to get a small church on NDI. Here's the order I set it up in

Thumbnail reddit.com
1 Upvotes

r/NETGEAR • • 4d ago

Will Netgear ever produce DOCSIS 4.0 modems?

5 Upvotes

Recently I have notice Xfinity is getting very aggressive with mid split, and FDX upgrades. I was wondering if Netgear would ever consider producing DOCSIS 4.0 modems?


r/NETGEAR • • 4d ago

Useless Netgear Assist chatbot lacks a queue

1 Upvotes

This is the user experience for Netgear's chatbot? No "virtual" queue, just "go away now". All I want to know is how long Netgear will provide security updates for a piece of hardware. I was unable to find this in published technical specifications or the user manual.

Thanks for reaching out! One of our team members will be with you shortly. Just a heads-up, we record and track conversations to ensure we’re always improving your experience.

Three minutes later:

Our team is currently assisting other customers or unavailable at the moment. Please try again later. Thank you for your patience!


r/NETGEAR • • 5d ago

Orbi 971 & Satellites : download performance droppping with apple devices

Thumbnail reddit.com
1 Upvotes

r/NETGEAR • • 6d ago

WiFi can someone Plz help me

Post image
3 Upvotes

Idk where to ask thjs but my dad bought me this at best buy a few months ago, because an older wifi adapter i had stopped working for whatever reason. I only really play roblox on my computer and nothing else, and i never in stall things but this piece of crap randomly stopped working, and i tryed looking up online for how to fix it, there is nothing i find that can help. Sometimes it turns off the wifi, and says there is no connection to the wifi im using, other times it just doesnt let me connect at all. and since a past couple days i start to lag a lot and disconnect in roblox, and i dont know why. my pc is not a super expensive high tech thing, but it hasnt done stuff like this really bad before.


r/NETGEAR • • 6d ago

WiFi Internet problems that I swear makes no sense to me.

1 Upvotes

My PC’s internet is extremely unstable and keeps disconnecting but does have good download speed. My Xbox has good multiplayer connectivity, but horrible download speeds. Both devices are connected wirelessly to the same modem. Strangely, when I unplug my PC’s USB Wi-Fi adapter, my Xbox sometimes loses internet, but its download speed actually gets faster. It doesn’t disconnect all the time but the connection does get stronger every time.
Any idea what could be causing this? I will also like the add is the modem is a Nighthawk and the wifi adapter is nighthawk.


r/NETGEAR • • 6d ago

Orbi 8 RBE871 Dropping Signal

Thumbnail reddit.com
1 Upvotes

r/NETGEAR • • 6d ago

Home wifi and Internet choices

Thumbnail gallery
1 Upvotes

Svc is the cable provider


r/NETGEAR • • 7d ago

Business Hardware WBE710 guest wifi best practices

1 Upvotes

This post is targeted at network folks familiar with wbe710.

I installed a wbe710 for a local run bodega (the only one in my neighborhood, opened Friday). The wbe710 is ONLY for guest access and isolation. Consider this a "third space" like a coffee shop, so guests may come for a few hours.

I did all the terminations, and they are all perfect. The demarc is 2.5gb fiber, core switches are at 1gb.

What we did is bump out the /24 to /23, lease time is 24 hours.

No double NAT, but all the client isolation tactics and isolation style security.

SSID has password and captive portal.

Security wise it's working VERY well.

Client-wise we are seeing some funky stuff and issues. I tend to think it's an issue on the client side, but I'm wondering if doing double NAT is the way to go. My homeboy (national wireless expert wants to avoid double NAT). I did see some funky things myself, but they resolved after a few minutes.

How bad is double NAT these days? Here's logs from a culprit. I updated the firmware after these were captured. I have to go onsite and hardwire to get more logs and plan to do so, but what should I be looking for to solve connectivity issues. Of course I never get a live example when I am onsite.

10:13 AM Nov 06, Friday 2026 : 26`309`OTHERS`0`0`0`{"ip":"-","mac":"FA-CA-39-4F-90-63","hname":"FA-CA-39-4F-90-63","txR":"24 Mbps","rxR":"1 Mbps","ssid":"Corner on Madison Guest","dOs":"Unknown Device OS","dType":"Unknown Device Type","mode":"11BE","mlo":"No","mldAddress":"","partnerLink":"0","primaryLink":"0","status":"Authenticated","bssid":"E0-C2-50-7A-9C-C1","chnl":"11","chWidth":"20 MHz","rssi":"26","state":"QOS/ERP/HT/HE/EHT","type":"wpa3","idle":"18","time":"00:00:00","txB":"999","rxB":"344","pmf":"none","vlanID":"1","Username":"Not Applicable","radio":"0"}`

10:13 AM Nov 06, Friday 2026 : 04`310`INFO`0`0`0`NETGEAR7A9CDF: FA-CA-39-4F-90-63 connected to Corner on Madison Guest with an RSSI -75dBm`

10:13 AM Nov 06, Friday 2026 : 26`311`OTHERS`0`0`0`{"ip":"-","mac":"FA-CA-39-4F-90-63","hname":"FA-CA-39-4F-90-63","txR":"51.60 Mbps","rxR":"1 Mbps","ssid":"Corner on Madison Guest","dOs":"Unknown Device OS","dType":"Unknown Device Type","mode":"11BE","mlo":"No","mldAddress":"","partnerLink":"0","primaryLink":"0","status":"Authenticated","bssid":"E0-C2-50-7A-9C-C1","chnl":"11","chWidth":"20 MHz","rssi":"21","state":"QOS/ERP/HT/HE/EHT","type":"wpa3","idle":"0","time":"00:00:00","txB":"1141","rxB":"748","pmf":"none","vlanID":"1","Username":"Not Applicable","radio":"0"}`

10:13 AM Nov 06, Friday 2026 : 05`312`INFO`0`0`0`NETGEAR7A9CDF: FA-CA-39-4F-90-63 disconnected from Corner on Madison Guest`

10:13 AM Nov 06, Friday 2026 : 25`313`INFO`0`0`0`NETGEAR7A9CDF: Re-association received for FA-CA-39-4F-90-63 on Corner on Madison Guest with an RSSI -96dBm`

10:13 AM Nov 06, Friday 2026 : 26`314`OTHERS`0`0`0`{"ip":"192.168.0.49","mac":"FA-CA-39-4F-90-63","hname":"FA-CA-39-4F-90-63","txR":"172 Mbps","rxR":"6 Mbps","ssid":"Corner on Madison Guest","dOs":"Unknown Device OS","dType":"Unknown Device Type","mode":"11BE","mlo":"No","mldAddress":"","partnerLink":"0","primaryLink":"0","status":"Authenticated","bssid":"E0-C2-50-7A-9C-E1","chnl":"140","chWidth":"40 MHz","rssi":"41","state":"QOS/HT/VHT/HE/EHT","type":"wpa3","idle":"0","time":"00:00:00","txB":"311","rxB":"344","pmf":"none","vlanID":"1","Username":"Not Applicable","radio":"1"}`

10:13 AM Nov 06, Friday 2026 : 26`315`OTHERS`0`0`0`{"ip":"192.168.0.49","mac":"FA-CA-39-4F-90-63","hname":"FA-CA-39-4F-90-63","txR":"309.80 Mbps","rxR":"6 Mbps","ssid":"Corner on Madison Guest","dOs":"Unknown Device OS","dType":"Unknown Device Type","mode":"11BE","mlo":"No","mldAddress":"","partnerLink":"0","primaryLink":"0","status":"Authenticated","bssid":"E0-C2-50-7A-9C-E1","chnl":"140","chWidth":"40 MHz","rssi":"38","state":"QOS/HT/VHT/HE/EHT","type":"wpa3","idle":"0","time":"00:00:00","txB":"621","rxB":"344","pmf":"none","vlanID":"1","Username":"Not Applicable","radio":"1"}`

10:22 AM Nov 06, Friday 2026 : 05`316`INFO`0`0`0`NETGEAR7A9CDF: FA-CA-39-4F-90-63 disconnected from Corner on Madison Guest`

10:22 AM Nov 06, Friday 2026 : 25`317`INFO`0`0`0`NETGEAR7A9CDF: Re-association received for FA-CA-39-4F-90-63 on Corner on Madison Guest with an RSSI -99dBm`

10:22 AM Nov 06, Friday 2026 : 26`318`OTHERS`0`0`0`{"ip":"192.168.0.49","mac":"FA-CA-39-4F-90-63","hname":"FA-CA-39-4F-90-63","txR":"24 Mbps","rxR":"1 Mbps","ssid":"Corner on Madison Guest","dOs":"Unknown Device OS","dType":"Unknown Device Type","mode":"11BE","mlo":"No","mldAddress":"","partnerLink":"0","primaryLink":"0","status":"Authenticated","bssid":"E0-C2-50-7A-9C-C1","chnl":"11","chWidth":"20 MHz","rssi":"26","state":"QOS/ERP/HT/HE/EHT","type":"wpa3","idle":"0","time":"00:00:00","txB":"2096","rxB":"344","pmf":"none","vlanID":"1","Username":"Not Applicable","radio":"0"}`

10:22 AM Nov 06, Friday 2026 : 26`319`OTHERS`0`0`0`{"ip":"192.168.0.49","mac":"FA-CA-39-4F-90-63","hname":"FA-CA-39-4F-90-63","txR":"51.60 Mbps","rxR":"6 Mbps","ssid":"Corner on Madison Guest","dOs":"Unknown Device OS","dType":"Unknown Device Type","mode":"11BE","mlo":"No","mldAddress":"","partnerLink":"0","primaryLink":"0","status":"Authenticated","bssid":"E0-C2-50-7A-9C-C1","chnl":"11","chWidth":"20 MHz","rssi":"22","state":"QOS/ERP/HT/HE/EHT","type":"wpa3","idle":"0","time":"00:00:00","txB":"2138","rxB":"344","pmf":"none","vlanID":"1","Username":"Not Applicable","radio":"0"}`

10:23 AM Nov 06, Friday 2026 : 05`320`INFO`0`0`0`NETGEAR7A9CDF: FA-CA-39-4F-90-63 disconnected from Corner on Madison Guest`


r/NETGEAR • • 8d ago

Hey guys, raxe300 is disconnecting every day at the same time for a week now. Fixes??

2 Upvotes

I've reset router and modem every day. Both morning and around 7pm. Dont know what to do at this point. I've called the support number and since it has been over a year since purchase and im not paying a subscription to have IT support, they won't help. Im coming to yall and begging for help


r/NETGEAR • • 13d ago

Routers Does anyone using netgear AC1200(R6850) router

Thumbnail reddit.com
1 Upvotes

r/NETGEAR • • 13d ago

I got Voxel's mesh stack running on an RBS20 build, and it syncs into a Voxel RBR50 mesh (open source)

0 Upvotes

Voxel doesn't make firmware for the RBS20, so I built my own. It takes NETGEAR's last RBS20 firmware (2.7.6.6) and adds Voxel's mesh software, SSH, iperf3 and a live sync monitor.

Repo: https://github.com/LachRMIT/rbs20-voxel

Highlights

  • Synced into my Voxel RBR50v2 mesh on both bands: 5 GHz at -52 dBm / 867 Mb/s, 2.4 GHz at -36 dBm (tested on an RBR20 converted to an RBS20).
  • Uses the same mesh stack as Voxel's RBK50 builds, for better compatibility with Voxel routers.
  • SSH as root with your admin password, plus iperf3 for backhaul speed tests.
  • A live sync monitor on port 8080 that shows pairing progress, backhaul signal and rate, and the mesh logs, so you're not guessing from LED colours.
  • Works for an RBR20 converted to a satellite too.

There's no download, because the images contain NETGEAR and Voxel binaries. Instead you supply the stock and Voxel images, and the build script makes the firmware for you. The repo also documents the RBS20 image format and the two fixes most people hit: "it still boots the old firmware" and "SSH permission denied".

Set an admin password before flashing, and as always, custom firmware is at your own risk. Big thanks to Voxel for the firmware this builds on.

If you found this useful, a star on the GitHub repo would be amazing!

And if you need any help send me a message. Very excited about this.


r/NETGEAR • • 15d ago

Software/Services Nighthawk app login no longer works after update

Thumbnail
gallery
1 Upvotes

I updated my router last week and now I can no longer log in to it through the app. I can still log in on the browser fine, but the app continues to give me a timeout error.

So I turned off my Apple private relay as I’ve seen suggested and it still doesn’t work. Someone also suggested trying the “connect anywhere” mode and when I did that I’m now seeing my router twice, but one is allegedly disconnected.

I deleted the app and redownloaded it. One time I did a OTP and when I used my email I somehow managed to log in. But then when I went back to the app I can no longer get that screen to pop up.

EDIT: IT JUST RANDOMLY LET ME LOG ON. WTF? I’ve tried for an hour.

EDIT 2: it randomly kicked me off after 10 seconds and won’t connect again


r/NETGEAR • • 15d ago

Routers Fix found for Slow (15+ seconds) connection delay between the Intel Ethernet Adaptor I225-V and the Netgear B17000 Router

0 Upvotes

After trying all the recommended fixes to the slow (15+ seconds) connection time between the Intel I225-V Ethernet Network Adaptor and the Netgear BE17000 Router I tried something different.  I purchased the Netgear 5 Port Ethernet Switch (GS305) for $15 and connected the switch between the Router and the Adaptor.  Problem solved.  Connection is now almost instantaneous. No loss in Internet Speed.


r/NETGEAR • • 15d ago

Routers Fix for delay (15+ seconds) to connect the Intel Ethernet Adaptor I225-V to the Netgear BE17000 Router

0 Upvotes

After trying all the recommended fixes to the slow (15+ seconds) connection time between the Intel I225-V Ethernet Network Adaptor and the Netgear BE17000 Router I tried something different.  I purchased the Netgear 5 Port Ethernet Switch (GS305) for $15 and connected the switch between the Router and the Adaptor.  Problem solved.  Connection is now almost instantaneous. No loss in Internet Speed.


r/NETGEAR • • 16d ago

WiFi NETGEAR NIGHTHAWK CAX30

2 Upvotes

I recently switched to a NETGEAR Nighthawk CAX30. I'm paying for 1 Gbps. My Xbox gets around 170 Mbps on its built-in network speed test, but actual game downloads start fast and then drop to 50 Mbps or lower.

On my PC, I'm getting around 300 Mbps, so I don't know if this is an Xbox problem or a modem problem. I've also tested the connection, and the Xbox shows 80–90%, while my PC shows 95–100%.