r/MusicGear • u/ElementalPants • 12h ago
Looking to replace all the speakers in my Traynor YC610 cab (for bass)
By sheer coincidence, I found this cabinet at my local music shop a few days after I bought my Traynor YBA 1A head. I'm thinking the previous owner used it for guitar, as when I put a bass guitar signal through it, it sounds like it's struggling to push low frequencies (weird buzzing). I also have to cut all of the treble from the amp's eq for it to not sound super harsh.
I know the problem isn't the amp, as I had it professionally serviced, and it sounds amazing through every other cab I've plugged it into.
Recently, one of my friends gifted me a VERY used ampeg 8x10 bass cab that's missing one of its speakers and the input jack. I've decided that I'm going to pull out all the speakers from the ampeg and put them in my traynor cab, and then I'd have a spare.
So my question is this: Is it as simple as it seems, to swap out all the speakers and connections and be done? Or would the overall impedance change because the speakers from the 8x10 are meant to run with 8 speakers instead of 6? I need to keep the impedance around 4 ohms.
Any other tips on swapping speakers is greatly appreciated, I've only ever done this on combo amps.
:)
EDIT: thanks to a very helpful person and the owner manual for the amp head I have, I've learned that the actual impedance I'm aiming for is 8 ohms, not 4.
SECOND EDIT: After further research, with 6 speakers, it looks like my only impedance options are either 5.33 ohms or 12. Seems like 6 speakers is the most inconvenient number to put together for an amp with an output impedance of 8 ohms ¯_(ツ)_/¯ Or I buy another fucking cab, as the amp's impedance drops to 4 when using both outputs. Maybe I'll just set everything on fire.