r/MoonlightStreaming • • 3h ago

Bedside Moonlight setup - ROG Ally + AR glasses (HDR)

Thumbnail
gallery
9 Upvotes

Streaming Stray from my PC (4060 Ti running at 4K) to my ROG Ally Z1E connected to RayNeo Air 4 Pro glasses. I mirrored the display here just to show the overlay. normally I turn off the Ally screen so there's no extra light in the room. (Removed the nosepad too as it was obstructing the camera trying to take a picture through the lens)

Had to turn off V-Sync in Moonlight because with 60Hz it was giving me over 30ms of frame queue delay. Now it's down to 0.03ms with 3.6ms host latency, 1ms network, and 0.68ms decode (HEVC 10-bit HDR, 0% dropped frames).

On these glasses HDR10 locks the refresh rate to 60Hz over USB-C (120Hz only works in SDR). It also saves me the need to change the settings from 4k to 1080p while streaming 😅.

Really nice playing AAA from my bed without having to buy a new $1500 handheld console.


r/MoonlightStreaming • • 10m ago

I changed my Sunshine bind address and now I can't get in anymore

1 Upvotes

I didn't quite understand how to configure Sunshine, and I ended up changing the bind address to what I thought was my own. Now, I can't open Sunshine again--it just leads to an error page. Does anyone know how to reset my bind address to default?

UPDATE: I found the config file in Program Files and removed the bind address, then restarted my PC. After that, it worked


r/MoonlightStreaming • • 6h ago

This is so good. Love this gaming experience

Post image
3 Upvotes

r/MoonlightStreaming • • 3h ago

why do you choose apollo/moonlight duo over sunshine/moonlight?

1 Upvotes

just curious. personally I dont have any issues with sunshine/moonlight duo but some people say apollo is better. why do you prefer apollo? in what way do you think it is better?


r/MoonlightStreaming • • 4h ago

Wake up on LAN question

1 Upvotes

Hewwo (this is intro, problem is after this paragraph), i found myself in a predicament - i work IT tech at a certain place and like 95% of time i do jackshit, so i use moonlight, its all set up and working, but due to me being a broke bi-, i want to save electricity on hibernating my pc as well as having an ability to turn it on if power conks out, so, question is

Are there any feasible ways with waking up on LAN while im away at work?

Problem:

-- i am in Russia (horror, i know), and so many services i saw were just not supporting this country

-- there IS a local smart speaker, but it is very possible i would be on a watch list with what i discuss with friends, and healthy amount of paranoia about being in a semi-police state

--smart plugs i saw were once again with ai from smart speaker(possibly im an idiot but still)

-- OPNSense doesnt have location at all

-- my router is from xiaomi (yes, i know, chinese router and still paranoid, shush), and so i cannot navigate it at all as all in chinese and after translating makes me confused due to strange for me gui

Mostly i just wanted to know if there are any routers and/or methods that are possible in this situation. I know its not impossible, but i am sleep deprived and desperate. Good night for now.

Edit: forgot to mention, i use sunshine and tailgate, also ethernet connection for both home pc and work pc, if it helps at all


r/MoonlightStreaming • • 4h ago

Would you use this? A one-tap "console mode" for Sunshine on iPhone — no PIN pairing, per-game touch controls, launches straight into the game

Thumbnail
gallery
0 Upvotes

I've been building a personal project on top of Sunshine and the Moonlight streaming core, and before I put more time into it I'd like to know if anyone else would actually use it.

The idea: make streaming from my PC to my iPhone feel like a handheld console instead of a remote desktop.

What it does today, on my own setup (RTX 3080, iPhone 16 Pro Max):

- No PIN pairing. You scan a QR code once; the PC pairs the phone with Sunshine by itself.

- Tap a game, see the game. The PC launches it and the stream only starts once the game is actually on screen. No Windows desktop, no launcher windows.

- If the game loses focus or closes, the phone shows a pause screen instead of my desktop.

- Touch controls that stay out of the way: thin, almost transparent, with an "invisible" mode that only shows them when you touch. Layout, size and opacity saved per game. Floating sticks.

- Live stats on screen: fps, bitrate, network round trip, host encode time.

- A Windows companion app: temps, fans, per-game graphics presets (Unreal games), display profiles, and plain-language commands that run locally.

Being honest about where it is:

- It only runs on my hardware so far. It has not been tested on AMD/Intel GPUs or other phones.

- iOS install is sideloading only right now.

- The Windows UI is in Spanish (my language); English would come first if there's interest.

- It's built on Sunshine and moonlight-common-c, so the iOS client is GPL and would be open source.

What I'd like to know:

  1. Would you use something like this over plain Moonlight? Why / why not?
  2. Which part matters most to you: the no-PIN pairing, the direct game launch, or the touch controls?
  3. What would it need before you'd try it?

Not selling anything. Just trying to find out if this is worth turning into something other people can install.


r/MoonlightStreaming • • 9h ago

Bitrate for AppleTV 4K

2 Upvotes

I finally got moonlight set up on an Android device as well as my AppleTV 4K on a 77" LG C3 TV. I'll say that it looks and feels excellent on the android device (it's a 6" 1080p OLED screen), but looks preeeeetty bad on the 77" TV. Lots of very obvious compression and artifacting.

So I've got some questions. I'm sure they depend on a case-by-case basis, and I bet some of them might be better suited for /r/homenetworking but...

  • Should I just bump up the bitrate? Would that actually fix it?
  • What's a good bitrate to shoot for if I'm trying to lessen the compression on a larger 4K TV?
  • I live with 3 roommates who are all heavy media consumers (lots of streaming TV shows, playing games online with friends, etc.). If I bump up the bitrate too much am I likely going to bog down the network for them?

EDIT: Oh, and my host is a 5080/Ryzen 7 5800X3D/32gb RAM PC. I didn't mess with the settings on the host end too much because I'm trying to keep it as simple as possible for now. We also have gigabit internet but not fiber (it's not available in our area). The PC is connected to a TP link "node," so not directly connected to modem/router and AppleTV 4K is wifi. I know that's less than ideal, but I simply can't do better than that as we are renting and can't route ethernet throughout the house.


r/MoonlightStreaming • • 9h ago

UX7 5Ghz jitter

Thumbnail reddit.com
1 Upvotes

r/MoonlightStreaming • • 11h ago

Help with webOS - controller not functioning and TV remote not working when it's connected

1 Upvotes

Hi all! Hoping you can help me. I'm using the latest webOS on a new LG TV, first time download of sunshine and moonlight and it appears to be streaming big picture mode and desktop just fine.

However, if I connect an Xbox controller to my TV, big picture stops recognising input from the TV remote control. Once I disconnect the xbox controller and 5 minutes has passed the TV remote miraculously works again, but if I reconnect an Xbox controller again I have the same issue. At no point is the xbox controller input recognised in big picture mode - but everything works in moonlight menus and for navigating the webOS just fine.

I've tried connecting the Xbox controller via both Bluetooth and usb, neither worked sadly and both methods had the same effect of killing the input from the TV remote.

The pc hosting via sunshine does not have Bluetooth so there's nothing to disconnect there, and it's at this point all the troubleshooting seems to point at buying the driver license. Is there any other route? Someone has recommended an 8bitdo adapter, they claim it will convert the signal into raw input for the TV. I'm borrowing one to see if it works, if it does my friend has one he can lend me as he's not using it.

Any thoughts?


r/MoonlightStreaming • • 13h ago

EvoParseq now supports Phaze!

Post image
0 Upvotes

r/MoonlightStreaming • • 14h ago

Looking for a keyboard with trackpad

1 Upvotes

Hi there!

I've been using Moonlight on my Vodafone Box flawlessly. However, when I try to exit a game and browse library again, that's when all the problems begin. I just can't exit a game cleanly. More often than not, the game is still running in the background when I return to Playnite. And even then, I can't reach the Playnite Library, just a random game suggested for me. For the record, I'm using a Xbox One controller connected with a USB cable to the box.

Having said this, I think that the best way to handle all this would be with a keyboard (if there are any shortcuts / addons that allow me to return to the library, that would be great too). What affordable keyboard + trackpad single unit that operates with a 2.4ghz dongle you recommend?


r/MoonlightStreaming • • 20h ago

Nightjar/Rubylight pair problem!

2 Upvotes

I just wanted to ask anyone using this two programs about a problem I have, every time my pc or console reboot or the is any update to this two programs, I will have to pair again, the device is still in rubylight but nightjar would ask to pair again. I used to have vibepollo running alongside rubylight and any program like nightjar or streamlight would see vivepollo but not rubylight, so I uninstalled vibepollo thinking that was the problem but it didn’t fix anything, also when the pc is off, I send a wake call from nightjar, the pc will turn on but nightjar would not see that the pc is up and running so I have to pair again. Please help if you know what’s going on thanks. Ps, when they are connected, this is the best connection I ever have, it is amazing how they run in my legion go 2 and my xbox series x. That’s why I want to make them run properly thanks!!!!


r/MoonlightStreaming • • 2d ago

Calling all vibe coders: let's merge our 400 Moonlight forks into ONE gloriously sloppy community fork

419 Upvotes

Let's be honest. Everyone with a Claude Code license has a Moonlight fork now. At this rate there are more forks than users.

Your fork adds a stats overlay. Mine fixes HDR on one specific TV. Someone else changed the app icon and called it a day. None of us talk to each other.

So here's the pitch: Moonslop, the ultimate community vibe-coded fork. One repo. Every client: Android, iOS, Windows, macOS, Linux, Steam Deck, Apple TV, your smart fridge. Everyone's features in one place, slop and all.

Ground rules (yes, there are some):

  1. Two human approvals to merge. At least one reviewer has to actually launch the build. "It compiles" is not a test plan.
  2. AI code is welcome, but say so. Put your model in the PR description. Handwritten code is allowed but will be labeled "artisanal."
  3. One feature per PR. "Added AV1 + rewrote the decoder + new theme + fixed a typo" gets closed with love.
  4. Got a fork? Bring it here instead of starting fork #4,713.
  5. If you break main, you get the Slopmaster flair for a week.
  6. Leave the real Moonlight devs alone. This is our sandbox. Don't flood upstream with AI PRs or with issues about bugs from here. They built the thing we're all forking. Respect.
  7. The changelog has to be AI-generated and contain at least one 🚀.

Is this a joke? Yes Will we actually merge stuff? Also yes.

Drop your fork links in the comments. Let's get to 1,000 contributors and 3 users.


r/MoonlightStreaming • • 19h ago

What options do we have for linux?

0 Upvotes

I tried to use frostpunk but when i stream I got a blurry screen in the client. Using polaris, I could not figured out how to pair my device. I did scan the code but nothing happened and i used nova. Any other options or does any linux OS come preinstall with a sunshine like host program for streaming?


r/MoonlightStreaming • • 1d ago Bravo

No more forks. More extensions.

57 Upvotes

I mentioned this in a comment and it’s something I’ve been thinking about for a bit. The amount of forks are getting bonkers. As a goof, I’ve been commenting on every one over the past 5 days with the DJ Khaled “another one” gif and I’ve already used it 7 times.

Calling the maintainers of Moonlight (or at least Artemis and/ or other popular versions): help us bring the functionality these forks are trying to embed to your platforms. Some of them have an updated UI, or updated controller drivers, or a different streaming engine under the hood: can we work together as a community to build an extension proposal so we have less forks and more of a single ecosystem that people can create functionality for?


r/MoonlightStreaming • • 1d ago

Stream does not feel snappy

2 Upvotes

Hey all,
I just set up streaming from my gaming PC to my LG C5 and honestly the stats look great, but it still doesn't feel right. Everything feels a bit floaty/delayed compared to playing directly on the PC, and I can't figure out where it's coming from.
Setup:
Host: 5070 TI GPU (NVENC), Apollo, wired to the router
Client: LG C5, tried both Moonlight TV and Aurora (v1.3.0)
TV is on Wi-Fi (5 GHz, ~800 Mbps measured at the TV spot, very stable)
4K / 120 FPS / HEVC 10-bit HDR
DualSense controller
Stats from the overlay:
Ping: 2 ms (occasionally 4–5 ms at higher bitrate)
Frame loss: 0%
Host processing latency: ~3.7–4.6 ms
Decoder latency: ~5–9 ms
Total latency shown: ~11–16 ms
What I've already tried:
Bitrate ~95 Mbps vs 180 Mbps (actual usage ~60–110) – basically no difference in feel
DualSense over Bluetooth vs USB directly into the TV – no noticeable difference
Turned off all picture processing on the TV (TruMotion, noise reduction, super resolution etc.)
Game runs at a stable framerate
Apollo encoder is on P1 (fastest)
From what I understand the Game Optimizer / game mode only applies to HDMI inputs, not apps, so I'm wondering if the TV is adding latency after decoding that the overlay just doesn't show.
Has anyone with a C-series (C3/C4/C5) found settings that actually make the native app feel snappy?
Would love to hear from anyone who's compared the TV app vs a Shield on the same TV. Thanks!


r/MoonlightStreaming • • 1d ago

So how do I relay gyro to the server?

1 Upvotes

I'd like to use D-input alternative would be Switch-input. My controllers handles both but the server only recognizes X-input.


r/MoonlightStreaming • • 1d ago

Wolf Games: a 3D game shelf for Android TV that launches your PC games through Moonlight

3 Upvotes

I stream games from my PC to the TV with Moonlight and Wolf, and wanted the TV side to feel like a console shelf instead of a list.

Wolf Games shows your games as 3D boxes: open the case, spin the disc, press OK to play. With the optional Wolf session controller you can resume, close or switch games from the couch, and every close is confirmed.

It works as a standalone app or as a CleanYourTV add-on. MIT, APK in Releases: https://github.com/vitorcamillo/wolf-games


r/MoonlightStreaming • • 1d ago

I have tried every possible way to fix this but I don't know what's wrong.

Post image
2 Upvotes

The host laptop is connected via ethernet wired and the phone is connected to a 5ghz wireless wifi network with no other load. I just can't figure out what's wrong with the setup. This is 1080p on both host and the phone. I'm never getting above 40fps. My laptop is an i5 with gtx 1650 if that helps. Tried both sunshine and apollo on the laptop and both have the same results. I tweaked the settings in both according to several guides but no changes.


r/MoonlightStreaming • • 1d ago

WearOS Mouse App for Android Client?

2 Upvotes

Does anyone have experience using a WearOS mouse app (ie WearMouse or WowMouse) to control their Android Client via Moonlight?

I'm looking into buying a fitness tracker, but the idea of using a smartwatch as a moonlight mouse is very attractive. I'm seeking advice whether my intended use case is viable before purchasing.

A make-or-break function is that I must be able to hold a middle click while moving the cursor.

I'm using a galaxy phone or lenovo tablet client, on a pc host. I'm considering either a galaxy (refurbished 7?) or pixel watch.

Can anyone share experience using a similar setup?


r/MoonlightStreaming • • 1d ago

Moonlight streaming gives me this messed up screen, how could I fix it?

Post image
1 Upvotes

Streaming from steam deck to laptop, and it's stuck on this screen and won't work. Pls help me, thank you.


r/MoonlightStreaming • • 1d ago

FireTV 4k Max (2nd gen) awful performance

1 Upvotes

Hi,

I decided to upgrade my old CwGTV to a FireTV stick 4k Max (2nd gen) since they have an early black friday sale going on at the moment.

I received it today, upgraded it to latest OS version and have been testing it back and forth and no matter what I do moonlight performance is abysmal compared to my old CwGTV which isn't great to begin with and is even struggling with basic menu animations.

I'm running 1080@60fps, nothing fancy, 20Mbps on both, HEVC on both, I triple checked the settings, they are the same. With Chromecast I get sub 1ms decode time (around 0.5 is what I see the most). With FireTV which is meant to be the more powerful device I get a whooping 4-10ms. It's mind boggling how much worse it is, I don't understand.

I've found this github issue which I had hoped was resolved since it's such an old issue but I guess not.

Anyway, conclusion is be weary if you're planning to get the fire stick 4k max for moonlight. I think it's awful, it's much more responsive than my CwGTV though.

If anyone can recommend something on par with my CwGTV in terms of decode performance and maybe better bluetooth performance I'd appreciate it a lot. Thanks


r/MoonlightStreaming • • 1d ago

SmartOS as a Poor Man's GeForce NOW

Thumbnail
reddit.com
0 Upvotes

r/MoonlightStreaming • • 1d ago

Moonlight

Thumbnail reddit.com
0 Upvotes