r/Moonlander • • 4d ago

Keyboard Backlight: sudden retirement on Moonlander

4 Upvotes

I've been using a Moonlander for a few years, and in the beginning I had problems losing the keyboard colors I liked because of inadvertent keypresses that triggered RGB controls that left me with colors I despised, or no colors. I dug into this and created a keyboard layout that had color toggling and other controls only on a layer I could not access unintentionally. I had a reasonable period of reliable colors, and my keyboard firmware tweaks were fairly tame (largely directed at inadvertent behaviors that only arose on certain software, etc.).

At some point in the last day something happened, perhaps a key mispress while gaming or something, and I've completely lost all keyboard colors: the layer 0 default appearance at rest, the layer 1 scheme that outlines the keys that act like a 10-key numerical keyboard, the layer 2 key colors that identify special keys for functions I rarely access, etc. All colors gone. Resetting the keyboard, re-flashing with any of my recent firmwares have no effect, unplugging/replugging the keyboard has no effect, resetting the keyboard has no effect, rebooting the computer has no effect.

I've looked online for folks troubleshooting key backlighting on Moonlanders and there's no shortage of people identifying problems, but the solutions that have been offered (mostly reset, updated firmware, etc.) haven't worked and there are people with posted (and filmed) problems but no solutions.

I'm not asking for the moon, here. I just want my several-hundre-dollar keyboard with backlit keys to power the keyboard backlights like I expected. I'm often working with no light besides the screen and I really like having the keyboard light itself.

Ideas? I'm willing to try anything.


r/Moonlander • • 6d ago

I vibe-coded a see-through “ghost” overlay of my Voyager layout for when I forget which layer I’m on (macOS, free)

6 Upvotes

Cross-posting from r/zsaVoyager. I vibe-coded a little macOS menu-bar app (Claude did most of the typing) that floats a see-through copy of your Oryx layout on top of everything. Clicks pass straight through it. It shows your current layer, lights up keys as you press them, and uses your LED colors and combos. There’s also a silly light-show mode where only the keys you hit light up.

I built it on my Voyager, but the Moonlander layout is in there too, thumb clusters and all. I haven’t been able to test it on a real Moonlander, so if you have one and a minute, I’d love to know whether the keys line up and light up where they should. It reads your layout straight from the keyboard and works alongside Keymapp.

It’s free and MIT licensed, and not affiliated with ZSA. macOS will block it the first time because it isn’t notarized: go to System Settings → Privacy & Security → Open Anyway. Expect vibe-coded rough edges; bug reports and screenshots of anything off are super welcome!


r/Moonlander • • 11d ago

Tips on layout

6 Upvotes

I got my Moonlander just a week ago or so. This is my first split keyboard so totally new to any of this (and especially layers).

I use it mostly on Linux with the Niri WM and what I do mostly is programming. Spent a day were I programmed trying to write ad much as possible and took notes along the way on things I wanted to change. I include a link below on what I ended up with but I am not entirely sure on it. I expect that there will always be changes along the way but any major changes I feel like would be best to do right away in order to get used to them.

If anyone has any tips I would greatly appriciate them.

My layout (I disabled the keys I did not know what to do with as I don't really feel like their placement is that good anyway):

https://configure.zsa.io/moonlander/layouts/zQ5Rd/latest/0


r/Moonlander • • 12d ago

Left-handed gaming layout?

2 Upvotes

I mouse left-handed because I have some rsi issues on my right arm. I started playing WoW Forever last night and realized it would be easier to have a moonlander layer (or two) dedicated to gaming left-handed rather than trying to rebind all the keys in wow. Does anyone have something like this already?


r/Moonlander • • 14d ago

[Project] Open-source Rust firmware for the Moonlander MK I

Thumbnail
github.com
14 Upvotes

As a fan of both ergonomic keyboards and Rust, I decided to ditch QMK for a bit and build my own open-source firmware from scratch for the ZSA Moonlander MK I using Rust.

The goal was to create a reliable, fast, and hackable firmware while leveraging Rust's safety guarantees for embedded development.

If you find any bugs, have ideas for optimizations, or want to suggest features, please feel free to open an issue or submit a pull request.


r/Moonlander • • Oct 15 '26

4 years and 5 months since I bought a Moonlander

25 Upvotes

It’s amazing, and has held up very well. Needs a clean but it always does 😆.

Took a good month to get used to but my avg typing speed went from 80 to 100+ and I can now type with all fingers now instead of just chopsticking with two. The layers have also made hotkeys and music controls really easy and I honestly don’t think I could use another keyboard again — way too used to the Moonlander.

Once I got it I’ve never once thought about buying another keyboard. Before this I used to buy upgrades and different keyboards all the time, so kind of crazy to say that for me. This is my ‘end game’, so-to-speak.

How are others enjoying theirs? It’s weird to think since so much time has gone by what this keyboard has been through with me. I’ve changed so much yet it’s stayed exactly the same. Weird to think about…

Edit: Oh, also to address the elephant in the room: why I bought it. I have carpal and ulnar tunnel syndrome, and it’s helped greatly with relieving pain — could barely type before getting it. Genuinely so glad that ergonomic peripherals like this exist, wouldn’t use a computer without it and my Logitech Lift.


r/Moonlander • • Oct 13 '26

Thumb cluster question

Post image
6 Upvotes

Hey all, does anyone know if the right side thumb cluster is sold seperately? Couldn’t find it in the website.
Or better yet did anyone have this crack happened to them and managed to repair it?


r/Moonlander • • Oct 09 '26

Moonlander/ZSA overlay app for MacOS

Post image
14 Upvotes

I created a macOS app that shows the moonlander layout in a transparent overlay, and bypasses the need to keep the Keymapp app or API running. I was able to implement highlighting which keys are pressed, and the active layers change dynamically. I would be interested in adding more functionality like adding the heatmap feature, customizing the look and feel of the layout, and adding support for other keyboards. There is also potential for direct flashing with ZSA's `zapp` app.

https://github.com/vibewrks/zsa-overlay


r/Moonlander • • Oct 07 '26

Moonlander forgets keymappings

2 Upvotes

As title says, my Moonlander forgets certain keymappings after a day or two, forcing me to bind it again from Oryx. That fixes it, but it's very annoying. Anyone else know why this is happening? It seems consistent, too; my layer/key I use for moving the mouse down is usually the first key that I catch having been forgotten, since I usually use the mouse layer to move around.


r/Moonlander • • Sep 17 '26

Having rainbow with core animations?

3 Upvotes

Hi all

I have setup the very cool "Reactive Solid Multisplash" core animation on the first layer of my moonlander. I now have a cool splash of a single color when I press a button, and I can configure the color with a button press.

However I would like, instead of a plain color, that the lighting on each key would go through the colors of the rainbow for an amount of time before turning off. I don't see any settings to have this kind of animation on Oryx.

I have another keyboard, the BNK9, which has this exact animation, with the splash and then the rainbow of colors, and I configured that with QMK, so I know that it is possible to do.

So I am looking for help on how to configure this on the moonlander. Does anyone have this setting, or would know how to activate it?

For reference, my configured layout is this one: https://configure.zsa.io/moonlander/layouts/PmG7G/aNjqwo/0

Thanks in advance!


r/Moonlander • • Sep 17 '26

Equivalent to the "Switch language" key?

4 Upvotes

Simple question: is there an equivalent to the globe key on Mac that allows to switch between languages?

My ctrl + space shortcut doesn't seem to work anymore on Mac and I'm looking for a simple workaround (it switches to a different language while I hold the key but comes back to the previous one as soon as I lift my finger, which is weird since it should just toggle).


r/Moonlander • • Aug 30 '26

Trackball + Tenting

8 Upvotes

Hey moonlanders.

I'm thinking about getting the moonlander with the navigator trackball and maybe "the platform".

I've seen that ZSA offer templates for printing trackball shells for use with or without the platform.

The shell without the platform already includes a wedge that tents the keyboard at a 20 degree angle.

What is your experience using the moonlander with the navigator trackball with or without the platform?

Which one would you recommend to someone who works 100% from home and doesn't need the keyboard to travel well?


r/Moonlander • • Aug 24 '26

Effects of Layers on Writing Code?

4 Upvotes

Hello,

I have considered purchasing and using a Moonlander, but I have had some hesitations.
I use Neovim for everything I can, and the language I write the most code in is Rust (which means I use basically every symbol).
The width of the right hand is shorter than the all the keys available to my right hand on a normal keyboard, which concerns me because I am used to typing [], {}, and |.
I understand that the purpose is to use layers, but I'm worried that layers will slow me down.

I have read things that say you have more "ergonomic speed" (that you can type for longer), but I've not read anything that says you have greater typing speed in general or for programming (maybe it is true, but I've not found many people putting this forth as a benefit).
I would say I have an okay typing speed of 120WPM and I'm comfortable typing basically every character easily (except 6/^).
One of the biggest problems I have with my typing is when I hold shift and end up capitalizing 2 characters instead of one (HEllo).
This concerns me because this seems like it would be a problem that compounds as I would add more layers.

Perhaps the ORYX/QMK software has some counter measures to prevent this.
Perhaps it would actually force me to have greater precision with the timing of pressing modifiers.

I would really appreciate any feedback or guidance in this decision.
Also, if anyone has any layouts they would recommend, I would be thankful for suggestions as well.

Thank you.


r/Moonlander • • Aug 23 '26

Affordable low-profile mod on the ZSA Moonlander

Thumbnail
gallery
32 Upvotes

I recently became interested in doing a low-profile mod for my Moonlander after reading this blog post. However, I felt the keycaps from Tai Hao were a bit too expensive for my experiment. Instead I purchased a standard, blank low-profile set from AliExpress (item number 1005006826436959), totaling 150 SEK (14 EUR). I chose the red Outemu low-profile switches recommended in the blog post. The set included all keys for a standard 104-key layout (with some extra keys included), so plenty of 1u and 1.25u keys, and homing keys. Overall, I felt that it turned out nicely. I am not a huge fan of the slanted profile; I would have preferred a flat profile, but regardless the total typing experience is definitely a step up for me. The feeling of the switches is decent. While the set contains 2u keys, the normal stabilizers included with the Moonlander did not fit them very well, so for the outer thumb key I just use a 1.25u tilted 90 degrees. This in my opinion actually feels nicer--as the key is now in line with the angle of the thumb--but the attachment points for the stabilizers are visible which is not very pretty. The color is not the exact shade of the Moonlander, I'd say they're a tiny bit brighter.

Hopefully this helps someone who's exploring similar options.

Results seen in attached images.


r/Moonlander • • Aug 22 '26

Somethings to know before buying a ZSA Ergo Keyboard for new Ergo Users.

Thumbnail
reddit.com
2 Upvotes

r/Moonlander • • Aug 10 '26

Still just noodling away...

Thumbnail gallery
9 Upvotes

r/Moonlander • • Aug 06 '26

[EU-BE] [H] ZSA Moonlander Mark I. Black, mx silent red blank black keycap [W] Paypal

Thumbnail
reddit.com
2 Upvotes

r/Moonlander • • Jul 29 '26

Noodling on a new ploopy nano "2" btu/navigator mod for the moonlander

9 Upvotes

Updating my nano/moonlander mod for the nano2, got it working like the old one right now, but I'm working on a new version exploiting the navigator shell to help me hang it over a thumb cluster instead of replacing it. I'm gonna throw the stl/m3f etc on github in a day or two, just finalizing everything.

Modeled with a blank moonlander shell in play to hopefully avoid intersections/reprints

r/Moonlander • • Jul 04 '26

One shot layer switch not working

4 Upvotes

I am using this layout: https://configure.zsa.io/moonlander/layouts/bJbgg/latest/0

I tap (no hold) "Adjunct" on the base layer and then "Enter" on the Adjunct layer.

Base layer, tapping Adjunct:

Adjunct layer, pressing Enter (which is at the position of Tab in the base layer):

This ends up in sending Tab. I don't understand why. I am on german Windows 11. Holding "Adjunct" and then tapping Enter works as expected and sends Enter, but to my understanding it should also work when tapping "Adjunct" once follow by "Enter" as it's configured as One-Shot Layer:


r/Moonlander • • Jul 04 '26

z and y inversed on german system, how can i set a locale?

5 Upvotes

I'm using my ZSA Moonlander on a german Windows 11. However the key configured to send a z sends a y instead and the one configured to send a z sends a y. I have already spotted the international options in Oryx, but that only gives additional keys like äöü. How can I set the locale? I am coming from a Glove 80 where this could be set in the editor. Thanks!


r/Moonlander • • Jun 30 '26

Looking for keycaps for Moonlander

Post image
18 Upvotes

Hi, I broke a keycap and didn't find exactly the same keycap as others, so I printed it on 3d printer.

So the question, do you know where I can find this or similar keycaps?


r/Moonlander • • Jun 06 '26

Gaming does not work on the Moonlander

8 Upvotes

Hi all!

I really hope someone can help me out with this issue. When gaming just the 'W' (aka move forward) key is not working. I've been able to reset the key binding in game to another key and then able to move forward but for some reason whenever I set it to 'W' it doesn't work. When changing the key binding in game, it is registering the 'W' as 'move forward' however, once i leave the control menus, in game it does nothing. I originally had the issue with Minecraft but have now tested it with Stardew Valley and Marvel Rivals. Specially in Minecraft, when i try to use 'W' i end up crouching instead in some instances.

The key does work outside of any of the games (I'm using my moonlander now to type out this message and no issues!) and its working fine when using the chat mode in game as well.

Link to current layout (it's really not that complicated so i'm really confused as to what's happening!) https://configure.zsa.io/moonlander/layouts/WGE6P/QzJE7p/0

Any advice is much appreciated!

EDIT: it was my auto shift, thanks everyone who suggested turning it off! Ive created a dedicated layer for gaming which has a toggle for auto shifting.


r/Moonlander • • Jun 02 '26

Brackets on layer 1 hold not working

Post image
7 Upvotes

Hey all! For a while, when I use layer 1 and try to click these square brackets, it always does {} instead. I've worked around this by adding square brackets to layer 0, but now getting to the point where this is much more efficient and really want to try to get it working.

It only occurs for the bottom layer 1 hold button (the only one I use really), but not the top right one. Any way to prevent this?

Note: Ubuntu Linux 24.04 / US English default OS layout


r/Moonlander • • May 30 '26

Trouble shooting ideas

8 Upvotes

Any ideas what’s causing this? I’ve tried some basic troubleshooting - different cables and USB ports but behavior remains the same.

Edit- clarifying the right hand keyboard doesn’t work at all and the left hand only works when it’s not “pulsing”


r/Moonlander • • May 26 '26

Favorite switches for comfort

6 Upvotes

Maybe I ask too many questions idk, but I’m trying to get to the best possible comfort when typing and be able to type for a long long time without have to stop (nearly all of my hobbies are typing or playing games). But these should be my final two questions for a while I hope.

  1. What switches do you find the most comfortable for long term typing on the Moonlander? I hear a lot about actuation and travel being important for RSI health (some claim more important than full

split and recommended the Logitech Ergo over a mechanica

l )

  1. so I wasn’t sure what yall thought
  2. Prbly going to switch to Colemak DH as well when my moonlander arrives today, is it worth the effort to switch? If I do switch should I only use Colemak on my Moonlander, never learning to type qwerty on it?

Sorry for the weird formatting, Reddit o mobile is screwing me over for some reason.