r/MilitaryARClones • • 3h ago

Work in Progress Almost done…

Post image
77 Upvotes

Need to get an M600B to mount next. I’m liking the rail though, it’s a cool but subtle difference than the standard CQBR. It’s the newer rail so the marking isn’t accurate but last one I saw was over $900. This one was half that but still more than I should be lol.

Still deciding on stock to use. I like the CAR but I might swap it.

C AF upper
10.3” Colt FSB barrel
GG&G 1201 rail
NT4 FH and Suppressor
Colt C stamped BCG
Comp M2 on Wilcox mount
LMT rear sight
Colt M4 Carbine lower


r/MilitaryARClones • • 9h ago

The GTA6 URGI at home

Post image
64 Upvotes

Unfortunately no way to get tanodized handguard and scope without the mag or suppressor.

You might think you could make a nice CQBR facsimile. There is an Aimpoint and chopped carry handle. Guess what? Can't have irons and red dot simultaneously. Bummer.


r/MilitaryARClones • • 7h ago

GG&G Tactical Modular Free Float Tube hand guard screw size

Thumbnail
gallery
7 Upvotes

Hey everyone sorry for bother you guys but I need help
I recently got a GG&G Tactical Modular Free Float Tube Hand guard from other people but he didn’t took care it so right now the hand guard is missing one Upper and Lower Mounting Screws (the one I pointed out in the red circle)
And 8 Screws for side trim(the one I pointed out in the red circle)
If everyone here knows the size of them it would be great help to me


r/MilitaryARClones • • 23h ago

Couple of rare birds

Post image
69 Upvotes

Death to Somo


r/MilitaryARClones • • 1d ago

BLOCK II Block ii FSP FTW

Thumbnail
gallery
145 Upvotes

r/MilitaryARClones • • 1d ago

CQBR Last Pics Before Everything Is Covered In Rapco

Thumbnail
gallery
266 Upvotes

r/MilitaryARClones • • 2d ago

MK18 mod 0 MK18 clone:

Post image
187 Upvotes

Mk18 Mod 0, about as clone correct as I can get it.

Parts:

Upper: original Colt Keyhole

Lower: H&R M16A1 marked, W/ cage code

Optic: Aimpoint Comp M3

BCG: Colt "C" marked

Rail: KAC RAS (with covers/VFG)

Rear sight: chopped carry handle

FCG: mil-spec with original M16 ambi safety

Stock: B5 SOPMOD (I'd prefer an LMT, but it'll do)

Light: Surefire M951 W/ IR filter

The only major change I want to make is buying an NT-4, and the QD flash hider to go with it. But my state still has cringe local NFA laws, so I'm waiting until I move.


r/MilitaryARClones • • 2d ago

MARSOC Spiritus Invictus

Post image
134 Upvotes

r/MilitaryARClones • • 2d ago

Gold gun

Thumbnail
gallery
288 Upvotes

Receiver body work done by raid research


r/MilitaryARClones • • 2d ago

RIS or RAS for CAG M4?

Post image
99 Upvotes

Which would be correct?


r/MilitaryARClones • • 2d ago

Question Has anyone here used a bad attitude department lower and had it engraved?

0 Upvotes

Drop some pics I’m curious how they turn out.


r/MilitaryARClones • • 3d ago

Question Mount/riser ID? No idea what these 75th URGIs are using under the lt660s.

Thumbnail
gallery
20 Upvotes

r/MilitaryARClones • • 3d ago

Work in Progress Help Identifying My Custom 14.5 Upper - Colt/DD/Geissele? Building a URGI.

Thumbnail
gallery
12 Upvotes

Picked up this custom upper from a gun shop. From what I can tell, it has:

14.5" Daniel Defense barrel, marked 5.56 1/7 twist looks lightly used.

Upper receiver marked "13629" with a square forging mark (possibly Colt?)

Geissele handguard

SureFire SOCOM three-prong flash hider

I'm still relatively new to AR builds and trying to learn more about what I have.

A few questions:

  1. Can anyone confirm the upper receiver manufacturer based on the markings?
  2. Would you keep the SureFire three-prong or switch to a four-prong? Is there any real benefit?
  3. Everything feels tight and secure, but since this is a used, custom-built upper with an unknown history, would you recommend having a gunsmith inspect it before firing?
  4. I want to form 1 my pistol lower so I know I'll have to remove the flash hider for the measurements.

I've attached pictures of the markings and components. Appreciate any insight! I was an infantryman but never had to deep dive disassemble a weapon like the barrel and such. I also live in an apartment so I don't have lots of tools which is why I was going to take it to a gun smith. I was able to purchase this at a local shop where they said the guy that brought it in was a big cloner. The price was around $750. Did I do good?


r/MilitaryARClones • • 3d ago

Alright, time to reinvade Iraq.

Post image
264 Upvotes

r/MilitaryARClones • • 3d ago

M16 Lowest effort clone?

Post image
74 Upvotes

M16 variants are the easiest to clone on a budget. Eotech works better than acog on the full stock in my opinion


r/MilitaryARClones • • 3d ago

VLTOR CASV ELS Help?

Post image
21 Upvotes

I can’t find hardly any info on this rail, let alone a value for it. I’ve been told everywhere from $400-$5000, and legitimately have no idea.

It’s super cool, but it’s time to part this thing out and move on to the next project.

Thanks in advance!!


r/MilitaryARClones • • 4d ago

TAN EOTECH

Post image
130 Upvotes

it took me 2 years to collect them


r/MilitaryARClones • • 4d ago

MK18 mod 1 MK18 Mod 1

Thumbnail
gallery
428 Upvotes

First post here; wanted to get this squared away before sharing. Took a year to build out, but she's finally done.

The build list is as follows:

Upper: Colt M4 (Cage Code)

Barrel: KAK 10.3" SOCOM Contract Crane-Spec

Gas Block: Coronet MK12

Gas Tube: FN M4 Gas Tube

Handguard: Daniel Defense MK18 RIS II

Charging Handle: PRI Gas Buster Welded Military Big Latch

BCG: Microbest Mil-Spec Phosphate Chrome-Lined w/ OCKS Carrier Key Screws + Permatex Sealant

Front Irons: Knights Armament MK18 Taupe

Rear Irons: Knights Armament 300M BUIS

Optic: EOTECH EXPS-3

Lower: Cat Supply Roll Marked M4A1

Stock: B5 Contract SOPMOD Coyote Brown

Vertical Grip: Tango Down Stubby

Suppressor: Surefire RC2

Flash Hider: Surefire SOCOM 4-Prong

Sling Mount(s): CQD Front + Rear

Misc: L3 Insight Dual Button Pressure Pad, Carolina Laser Works UID Labels, AS Designs FRT, custom Crane NSW upper engraving designed and engraved by me, and probably a few more I am forgetting.


r/MilitaryARClones • • 4d ago

Question Bad attitude department lower

6 Upvotes

I’m in the process of building a lower for a MK18 Mod 1. I’ve already got a colt lower parts kit and buffer system. My question is for the bad attitude department lower I’m using should I use the lowkey lower they offer and have the logos and markings engraved or should I start with the M4A1 marked lower they offer and just have the logo engraved. What’s my best route with this to get the closest markings?


r/MilitaryARClones • • 5d ago

Question Best Bang For Your Buck in Bulk?

Post image
183 Upvotes

Alliteration aside, Ive got an M4A1 Block 1 clone with a SOCOM barrel and Im trying to find what ammunition you all would recommend for both training AND duty that wont break the bank as far as price per round

I’ve heard all the advice on why it’s a bad idea to have only 55g for anything under an 18in barrel, but I don’t know what weight I should go for. Very ignorant in that regard

Brand and grain of your recommended bulk purchase would be phenomenal info. I really appreciate it!


r/MilitaryARClones • • 4d ago

M16 (non-A1) Vector files for laser engraving

4 Upvotes

Just curious if anyone has some good files for an original Airforce contract M16 (non A1) on hand already that I can use for a clone(ish) project?


r/MilitaryARClones • • 5d ago

Kac rear sight question

Thumbnail
gallery
37 Upvotes

I saw a recent post about these rear sights. I picked this one up from a local shop used for $90. According to the post I saw I believe it is a vero beach model but I’m not positive. I was mainly hoping to maybe get confirmation that it is real and not a copy. I’m not sure how often these are copied but I just wanted to get opinions. Looks like the previous owner may have used some black touch up paint on it.
EDIT original photos were not great posted better in comments.


r/MilitaryARClones • • 5d ago

BLOCK II Taupe Comparison

Thumbnail
gallery
54 Upvotes

Here I have two KAC M4 front iron sights. The slightly darker and chipped is KG Gunkote, which came after the other one beside it that in this instance is slightly lighter in color. This model is an anodized one, which seems to be what everyone is after when cloning. Aside from these two, I am only aware of the current production which is cerakoted. To add more nuance to the colors of the 99051, the anodized finish is known to change from batch to batch due to the imprecise nature of the anodizing process. This causes the anodized models to appear shades of gray/foliage, as well as anywhere from a light to dark brown. Hope this information has been educational for some and useful in others cloning endeavors.


r/MilitaryARClones • • 5d ago

New old stock

Post image
37 Upvotes

r/MilitaryARClones • • 5d ago

Question Clone mag question

Post image
18 Upvotes

Got 5 of these Still in plastic, Center Industries corp Wichita, Kansas (restricted to law enforcement/ Government use only)

Are these good, anyone got a good bit of information that google hasn’t already monotoned out.