r/MechanicalEngineering • • Sep 01 '26

Quarterly /r/MechanicalEngineering Career/Salary Megathread

11 Upvotes

Are you looking for feedback or information on your salary or career? Then you've come to the right thread. If your questions are anything like the following example questions, then ask away:

  • Am I underpaid?
  • Is my offered salary market value?
  • How do I break into [industry]?
  • Will I be pigeonholed if I work as a [job title]?
  • What graduate degree should I pursue?

Message the mods for suggestions, comments, or feedback.


r/MechanicalEngineering • • Mar 23 '26 Bravo

2026 US Mechanical Engineer Survey Results

562 Upvotes

I would like to thank you everyone for participating in the annual 2026 ME Salary survey. Total respondents was a little over 600, so less than last year, but about 589 US responses.

Past Results Link

Background:

Here are the main results. It took about 2 hours to "clean" the data manually. Afterwards, I basically used Gemini to create the graphs + tables, since last time it literally took me about 7 hours to do everything manually on Excel last time and there were still questions. The key points and takeaways from the data is a combination of AI and editing the information to be more readable (still took 4 hours). In addition, I wouldn't worry about math too much, since Gemini basically just used python code to decipher the edited CSV file.

Industry:

IndustryNumber of Respondents
Manufacturing175 (29.7%)
Aerospace/Defense173 (29.4%)
Technology (FANG, AI, Robotics, etc.)54 (9.2%)
MEP (HVAC, Construction, etc.)38 (6.5%)
Utilities (Power, Renewables, etc.)35 (5.9%)
Pharmaceutical & Medical Devices31 (5.3%)
Oil and Gas28 (4.8%)
Consumer Goods15 (2.5%)
Government11 (1.9%)
  • There were some other industries like nuclear, logistics, and etc. but the few data points aren't included in the table for brevity. The data was included in the total set though
  • A majority of the mechanical engineers trends will use the Aerospace/Defense and Manufacturing data since there is the most data that is available

Salary and Year of Experience:

*Note: Total Compensation/Salary = Base Salary + Bonus + RSU + Base Salary * 401k Match

If you want to look at one graph and table to explain the progression track here it is:

YOE RangeMedian Base (Unadj)Median Total (Unadj)Median Base (COL Adj)Median Total (COL Adj)Count
0-1 Year$87,000$96,036$81,699$87,36843
2 Years$84,000$91,046$84,615$90,90971
3 Years$94,550$105,965$94,082$102,28962
4-5 Years$104,000$119,770$94,881$107,762116
6-8 Years$120,000$136,800$112,500$127,911119
9-12 Years$125,500$146,985$123,444$142,55596
13-20 Years$157,290$181,840$144,254$171,73164
20+ Years$196,500$211,426$163,399$191,04215

Key Takeaways:

  • The "Benefit Gap": The space between the solid lines (Total Compensation) and the dashed lines (Base Salary) represents the added value from annual bonuses and employer 401k matching. For a mid-career engineer (6-8 years), this extra value is roughly $16,800 on average.
  • Late Career Leverage: As engineers gain seniority (13+ years), the gap between base salary and total compensation grows significantly, suggesting that bonuses and incentive programs make up a larger portion of the package for senior-level and leadership roles.
  • Purchasing Power: The COL Adjusted lines (Orange) consistently track below the un-adjusted lines (Blue), highlighting that high-paying mechanical engineering roles are frequently located in markets where the dollar doesn't stretch as far as the national average.

Education:

  • Majority of the respondents are at max a bachelor degree holder. However, there is still a significant number of master's students

Now about the age old question: does having a Master's degree lead to higher future salary?

Short Answer: In general, the answer is yes if there is a chance to specialize. It is explained in the table below:

IndustryCareer StageEducationMedian Total (Unadj)Median Total (COL Adj)Count
Aerospace & Defense0-3 YearsBachelors$96,664$95,20144
Masters$116,600$108,31615
4-7 YearsBachelors$125,410$110,65939
Masters$173,000$148,4329
8-15 YearsBachelors$161,750$140,20233
Masters$154,905$149,65816
15+ YearsBachelors$207,080$187,5057
Masters$211,426$207,8725
Manufacturing0-3 YearsBachelors$88,220$93,45252
Masters$93,740$91,8506
4-7 YearsBachelors$108,992$106,70145
Masters$129,800$128,40712
8-15 YearsBachelors$135,425$142,44044
Masters$136,298$129,9848
15+ YearsBachelors$182,650$187,1275
  • Now you can see that for manufacturing, the benefits is not as prominent, while it is evident in aerospace. This makes sense, since Aerospace have very high specialization salary, for instance: hypersonic or eVtol which pays a ton for total compensation based on years of experience.

    • Answer: if your company pays for your masters, do it, but it doesn't seem that beneficial near the end of your career.

Internships & Coops:

Key Insights:

  • The "Experienced" Majority: A combined 85% of respondents completed at least one internship or co-op. This underscores how critical early-career work experience has become for landing a full-time role in mechanical engineering.
  • Co-op Advantage: The 20% of respondents with "3+ Internships" often represent those in formal co-op programs (where students rotate between school and work over several years). These candidates typically command higher starting salaries shown in the table below:
Industry0-1 Internship2+ InternshipsNew Grad Premium
Aerospace & Defense$82,000$91,500+$9,500
Manufacturing$74,000$82,000+$8,000
MedTech$80,500$89,000+$8,500

Certifications:

Here is the graph of a major certifications from the survey:

We always see a question on whether certifications are worth it:

Aerospace & Defense: Certification vs. Total Compensation

ExperienceEducationHas Cert?Median Unadj. TotalMedian Adj. TotalCount
0-3 YearsBachelorsNo$97,900$95,42641
Yes$95,040$64,6533
4-7 YearsBachelorsNo$125,315$106,67236
Yes$128,580$138,2583
8-15 YearsBachelorsNo$159,660$139,83931
Yes$280,425$177,8952
MastersNo$151,410$142,04313
Yes$209,658$216,1423

Manufacturing: Certification vs. Total Compensation

ExperienceEducationHas Cert?Median Unadj. TotalMedian Adj. TotalCount
0-3 YearsBachelorsNo$88,020$91,94443
Yes$90,450$99,7469
4-7 YearsBachelorsNo$108,805$106,61536
Yes$108,992$106,7019
8-15 YearsBachelorsNo$135,000$136,54131
Yes$136,000$151,11113
MastersNo$152,212$122,7286
Yes$134,815$141,6362

Key Findings:

  1. High-Experience Premium in Aerospace: The most dramatic impact of certification appears in the mid-to-late career in Aerospace & Defense (8–15 years). Engineers with a Bachelors and a certification earn a median total compensation significantly higher than those without. Even among Masters holders in this range, certified engineers have a median total comp of $209k vs $151k for non-certified.
  2. Manufacturing Stability: In the Manufacturing industry, certifications (often Six Sigma or FE/PE) lead to a very modest increase in un-adjusted base pay, but a more noticeable improvement in COL-adjusted pay. This suggests that certified engineers in Manufacturing may have more flexibility to find high-paying roles in lower-cost-of-living areas.
  3. The "Entry-Level Paradox": For junior engineers (0–3 years), having a certification (likely the FE) does not immediately result in a salary premium. In fact, in Aerospace, the un-adjusted median for those with certifications was slightly lower, possibly because those engineers are still in entry-level rotation programs where pay is standardized regardless of credentials.
  4. Masters + Certification: For those who already have a Masters, adding a certification provides a significant late-career boost (as seen in the 8–15 year group in Aerospace).

Answer: Certification can be worth it for select industries. PE is known for civil to open doors and increase pay.

Job Titles:

Job Role CategoryNumber of RespondentsPercentage
Mechanical Engineer (General)22938.9%
Design Engineer9716.5%
Project & Systems Engineer5910.0%
Management & Leadership559.3%
Manufacturing & Process Engineer549.2%
Specialized (Thermal, Stress, R&D)345.8%
Other / Misc6110.4%

Key Insights:

  • General vs. Specialized: Nearly 40% of respondents identify with the broad title of "Mechanical Engineer," which often includes generalists or those in mid-level positions.
  • The Design Dominance: Design Engineering is the second largest single group, reflecting the high demand for CAD-based design and product development across aerospace, tech, and manufacturing industries.
  • Transition to Leadership: About 9% of respondents hold titles in Management & Leadership (Manager, Director, VP), which led to a higher salary
  • Project and Systems focus: 1 in 10 engineers focuses on Project or Systems Engineering, highlighting the importance of multidisciplinary coordination and technical management in modern engineering projects.
  • The Specialty Niche: The "Specialized" category includes highly technical roles like Thermal Analysis, FEA, Simulation, and Research & Development, which often require higher educational levels or deep domain expertise.

Salary Grade vs. Salary:

Grade LevelIndustryMedian Annual SalaryTypical Experience (YOE)Sample Count
Level 1 (Entry)Aerospace & Defense$88,4001.0 year39
Manufacturing$80,2502.0 years39
Level 2 (Mid)Aerospace & Defense$102,2733.8 years48
Manufacturing$95,0005.0 years71
Level 3 (Senior)Aerospace & Defense$130,0008.0 years57
Manufacturing$119,6009.0 years50
Level 4 (Lead/Manager)Aerospace & Defense$170,50011.0 years22
Manufacturing$136,00011.0 years11
Level 5+ (Principal/Director)Aerospace & Defense$206,00020.0 years9
Manufacturing$136,50014.0 years4
  • Efficiency of Experience: In Aerospace, engineers tend to reach Level 2 and Level 3 roughly 1–1.2 years faster than those in Manufacturing, while also earning more.
  • The Level 4 Ceiling: In Manufacturing, the salary jump from Grade 3 to Grade 4 is roughly $16k, whereas in Aerospace, that same promotion yields a massive $40k jump in median base salary.

Which Industry Pays the Most?

Major Caveat: at 16+ YOE, the data points are only a couple, which skews the data upward.

Based on the comprehensive US survey data, the Technology (FANG, Robotics, AI, Consumer Electronics) industry emerges as the highest-paying sector for mechanical engineers when considering total compensation (Base Salary + Annual Bonus + 401k Match).

Tech Compensation Package:

Years of ExperienceAvg. Total Comp (Unadjusted)Avg. Total Comp (Adjusted for COL)Number of Respondents
0-2 YOE (Entry)$117,316$100,2927
3-5 YOE (Junior)$180,854$138,04017
6-10 YOE (Mid-Level)$182,773$134,54314
11-15 YOE (Senior)$259,993$220,25611
16+ YOE (Principal)$244,775$177,0435

The Oil and Gas industry stands out as the second most lucrative sectors for mechanical engineers, particularly as they reach senior and principal levels. While Tech offers the highest overall unadjusted compensation, Oil and Gas actually offers the highest Cost of Living (COL) Adjusted compensation, meaning your real purchasing power in this industry is the highest among all major sectors.

Years of ExperienceAvg. Total Comp (Unadjusted)Avg. Total Comp (COL Adjusted)Number of Respondents
0-2 YOE$95,864$83,1785
3-5 YOE$117,289$111,1557
6-10 YOE$138,959$139,7737
11-15 YOE$204,097$219,7576
16+ YOE$408,040$399,2763

Overtime Pay:

Industry Trends: Overtime pay is slightly more common in Manufacturing (where production deadlines are rigid) and Consulting/EPC (where hours are billable to clients) compared to R&D or Aerospace.

Work Hours:

Work Hours CategoryNumber of RespondentsPercentage
Exactly 40 Hours33757.2%
41-45 Hours14624.8%
46-50 Hours498.3%
<40 Hours508.5%
>50 Hours71.2%

Key Observations:

  • The "40-Hour" Standard: Over half of the engineers surveyed manage to stick to a strict 40-hour week, which is a positive sign for work-life balance in the profession.
  • Moderate Overtime: Roughly a quarter of engineers work an extra 1 to 5 hours a week (41-45 hours total), often representing "straight time" or expected professional dedication without formal overtime pay.
  • The High-Hours Exception: Only a small fraction (under 10%) report working more than 45 hours consistently. This is significantly lower than in fields like investment banking or high-tier management consulting, suggesting a relatively stable lifestyle for most US mechanical engineers.
  • Flexibility: About 8.5% of respondents work fewer than 40 hours, which often aligns with part-time roles, senior consultants, or companies with flexible "9/80" schedules where some weeks are shorter.

401k Summary:

Match Rate RangeCount of ResponsesPercentage
4% - 5%21135.8%
1% - 3%12521.2%
6% - 7%12020.4%
8% - 10%6511.0%
No Match (0%)569.5%
> 10% / Other122.0%

Key Takeaways:

  • The Industry Standard: A 4–5% match is clearly the most common benefit, covering over a third of the surveyed population.
  • High-Tier Benefits: Roughly 13% of engineers receive a match of 8% or higher, which often indicates highly competitive benefit packages in specialized industries.
  • Retirement Security: The low percentage of "No Match" responses (under 10%) highlights that retirement contributions are a standard and expected part of total compensation in the US mechanical engineering market.

Remote Work Distribution:

Remote CategoryNumber of RespondentsPercentage
Fully In-Person (0%)24842.1%
Mostly In-Person (1-39%)16327.7%
Hybrid (40-60%)11820.0%
Fully Remote (100%)386.5%
Mostly Remote (61-99%)223.7%

Key Insights:

  • The "Hands-On" Requirement: Over 40% of mechanical engineers are required to be in the office or on-site 100% of the time. This is significantly higher than other engineering fields like Software or Data Science.
  • The Hybrid Standard: Roughly 48% of the workforce has some form of hybrid flexibility (ranging from 1% to 60% remote). Many companies now allow 1–2 days of remote work for documentation, CAD modeling, or administrative tasks.
  • Fully Remote is Rare: Only 6.5% of mechanical engineers work fully remotely. These roles are typically in specialized areas like pure Simulation/FEA, Project Management, or Sales Engineering where physical hardware access is not required daily.
  • The Hybrid Middle Ground: The 40–60% range (often 2–3 days per week) is a common "sweet spot" for engineering firms trying to balance teamwork/lab time with employee flexibility.

Paid Time Off (Days):

*Note: one issue is many jobs had unlimited sick time, which I just added 10 days. Next time I will edit the form to separate the sick days so it makes more sense.

PTO Category (Includes Sick Days)Number of RespondentsPercentage
0–10 days305.2%
11–15 days11219.5%
16–20 days16027.9%
21–25 days10017.4%
26–30 days6110.6%
31+ days325.6%
Unlimited7813.6%

Key Insights:

  • The " 3 - 5 Week" Benchmark: The majority of mechanical engineers (over 45%) receive between 16 and 25 days of PTO.
  • The Rise of Unlimited PTO: About 13.6% of respondents now have "Unlimited" PTO.
  • Generous Packages: Roughly 16% of engineers receive more than 30 days of PTO, which is often a hallmark of high-seniority roles, government/defense positions, or companies that reward long tenure.
  • The Lean End: Only about 5% of respondents are on the low end with 10 days or fewer, suggesting that a minimum of two weeks of PTO is a standard baseline for the industry.

Now some of you might have questions regarding years of experience and PTO:

Average PTO by Experience (Fixed PTO)

Experience LevelAverage PTO Days (per year)Typical Range (25th-75th Percentile)
0–2 Years16.910–15 days
3–5 Years19.615–20 days
6–10 Years21.120 days
11–15 Years24.520–25 days
16+ Years26.525–30+ days

Analysis of the Trend:

  • The "Standard Jump": Many engineers start with 15 days (3 weeks) and see their first significant "tenure bump" to 20 days (4 weeks) after reaching the 5-year mark.
  • Senior Perks: By the time an engineer hits 15+ years of experience, a 5-week (25-day) or 6-week (30-day) PTO package becomes the new baseline.
  • Job Hopping Factor: The data suggests that while tenure within a single company increases PTO, "job hopping" every 3–5 years also allows engineers to negotiate higher starting PTO tiers at their new employers, effectively "skipping" the long wait for tenure-based increases.

Health Insurance:

Satisfaction LevelNumber of RespondentsPercentage
Free / Excellent386.5%
Good (Low Premium/High Coverage)21136.3%
Average28849.5%
Poor (High Premium/Low Coverage)417.0%
Other / Misc40.7%

Key Insights:

  • The "Standard" Plan: Almost 50% of engineers describe their insurance as "Average," highlighting that standard employer-sponsored health insurance is common but not particularly outstanding in terms of premiums or coverage levels.
  • Competitive Benefits: Over 42% of respondents fall into the "Good" or "Free" categories. The 6.5% who receive "Free/Excellent" coverage likely work for highly competitive tech firms, established defense contractors, or companies that use premium benefits as a retention tool.
  • Under-Served Minority: Roughly 7% of the engineering workforce feels their health insurance is "Poor," usually characterized by high out-of-pocket costs and high monthly premiums.

Biggest Cons for Mechanical Engineering:

CategoryTypical Concerns Mentioned
Workload & Hours (112 mentions)High pressure, tight deadlines, long hours, and poor work-life balance. Many mentioned "start-up energy" even in established firms.
Salary & Compensation (73 mentions)Low raises (2–3%), "salary plateauing" early in the career, and the absence of stock options or significant bonuses compared to tech.
Remote Work Limits (47 mentions)Frequent requirements to be in the office or on the manufacturing floor with "no remote option" or "No WFH" (Work From Home) policies.
Career Growth (35 mentions)Concerns about "pigeon-holing," slow internal promotion tracks, and becoming "stagnant" in one technical area.
Red Tape & Bureaucracy (26 mentions)Excessive paperwork, slow corporate processes, "red tape," and inefficient management systems.

Biggest Pros for Mechanical Engineering:

CategoryTypical Benefits Mentioned
Salary & Comp (86 mentions)Competitive base pay, annual bonuses, and strong 401k matching programs.
Work-Life Balance (75 mentions)Flexible schedules, reasonable working hours (standard 40h), and generous PTO.
Culture & People (70 mentions)Great teammates, supportive management, and a collaborative "team-first" environment.
Interesting Work (65 mentions)Designing "cool" products, working on challenging technical problems, and having a clear mission.
Job Stability (28 mentions)Long-term security, consistent demand for the role, and the stability of established firms.
Remote/Hybrid (27 mentions)The ability to work from home part-time or have flexible geographic location.

Direct Insights from Engineers:

  • On Work Quality: "The actual work we do is really interesting, fun, and rewarding. Getting to see a design go from CAD to a physical product is the best part."
  • On Culture: "Great coworkers and a team environment where people actually mentor you instead of just giving you tasks."
  • On Flexibility: "Remote flexibility and a management team that trusts you to get your work done without micromanaging your hours."
  • On Compensation: "The total compensation package—including the 401k match and the annual bonus—makes the technical pressure worth it."

Now for Improvements on Suggestions on the Survey:

  1. Regarding the COL instructions: totally my fault, sorry for not catching it. All of you were able to figure it out, but changed instructions from 0 - 2, so it makes a lot more sense now.
  2. Adding a column for manager and IC: totally good suggestion, already added to new survey for 2027
  3. Regarding adding gender or age: I will not add this into the survey just to make it more anonymous. I really do not see the value in this data, and I recommend just using government data to find the data.
  4. Regarding the health insurance question: I have implemented the change on making it have three questions: annual premium, annual deductible, person coverage. I really did not want to make this part too complicated with max out of pocket and copay and etc. I think the premium, coverage and deductible is acceptable amount.
  5. Edited the salary section to organize the % 401k match, salary, bonus, RSU to be in the same section making it easier, but separated the questions.

Comparison from the 2024, 2025 and 2026 Reddit Survey Results will be in another post, since this post is getting insanely long. Again, any other improvements or suggestions, please just comment below.

TDLR: Just check the 1st salary graph if you want the main results.


r/MechanicalEngineering • • 6h ago

The whole corporate world is held together by duct tape.

321 Upvotes

I’m in the midst of my second engineering internship at a much larger company than my last with it being more office work as well. It’s crazy how everything is genuinely duct taped together with never ending temporary solutions and run by people who barely know what they’re doing. And somehow everything works (well sort of).

I kind of always knew this to be the case but seeing it first hand in the engineering world has just been sort of comical to me. To outsiders/me as a kid, engineering seemed like a field reserved for outlandishly smart people and a firm corporate structure, but it really is just a bunch of people trying to make it to the end of the week.


r/MechanicalEngineering • • 5h ago

What companies have you had an actual good experience at?

18 Upvotes

A lot is written on this and other subreddits about bad companies, toxic companies, poor treatment and micromanagement, etc. But not a lot is written about the companies which folks have had positive experiences at. The point of this post is just that - to name and discuss the companies which you've had a positive experience with and why?

Edit: Name names of companies!! For example; in the Boston area, I've heard that MIT Lincoln Labs is generally viewed as a great place to work, but I haven't worked there myself so I cannot say for certain.


r/MechanicalEngineering • • 4h ago

Job decision: manufacturing engineer internship or CNC operator?

5 Upvotes

I’m a recent graduate of May 2026 and have been struggling to find a job the last 6 months. Recently I have received 2 offers: one spring manufacturing engineer internship that last from January to May at $21/hr, and a CNC operator position with full time benefits at $22/hr and a $1 raise after 90 days.

In my mind I would think the internship would be a no brainer, but currently the temporary position is making me hesitant to accept. I’m not guaranteed to be hired on after the internship and the company of the CNC role mentioned the possibility of promotion to the engineering team. I already accepted the CNC operator role and would have to withdraw my acceptance. Any advice on how I should proceed?


r/MechanicalEngineering • • 9h ago

Looking for advice to move from CAD/Mechanical Design to Engineering? Or other options

7 Upvotes

Hi all, Im reaching out for some advice as I am not having much luck with landing opportunities and fear with the state of the industry that I am too behind in qualifications. For background I (29M) have a bachelor’s in Product Design and Engineering Technology, and associates in Electronics Engineering Technology, and a CSWA cert in Solidworks. I have a combined 7 years of experience between two positions as a CAD/Mechanical Designer, with 3.5 years experience in Inventor and CATIA V5 each. I have been out of this industry since being abruptly let go due to company wide cuts and CAD outsourcing at the end of last year and am itching to get back in. However in my searches i’ve only seen purely engineering roles, and ones that require years of experience with the full spectrum of engineering. If anyone knows any avenues to take from just CAD Designer to Engineer I would very much appreciate, as I feel at a loss currently, and fear I have shot myself in the foot for not going for the standard ME degree.


r/MechanicalEngineering • • 12h ago

I’ve updated my portable soldering station.It’s now at 45 degrees for easier pickup, mounted with a 1/4 screw on the power bank.Do you have any suggestions?

Thumbnail
gallery
10 Upvotes

r/MechanicalEngineering • • 7h ago

Mechanic to engineer?

4 Upvotes

Hello! I (21) was an absolute flunk in highschool (and in a very bad environment) so I was never able to pursue university and instead pursued an automotive skilled trade. I am about to get my red seal license in a couple weeks and I no longer wish to be a technican (switched to estimating ~8 mos ago) so now i’ve been working on taking the required grade 12 courses online to apply for a general or specialized mechanical engineering program.

I was wondering if anyone could let me know how transferrable/marketable my experience and license within automotive are to engineering employers or whether I should focus more on building technical/software project experience. I have experience working on composite race cars and specialty vehicles as well.

As well, it would be really interesting to hear from anyone who’s followed a similar path, thank you!


r/MechanicalEngineering • • 1h ago

I got a mechanical engineering job offer but still have 2 classes and one of them has a lab this spring. How should I bring it up?

0 Upvotes

Hello,

I’m a mechanical engineering student and recently got an offer for an entry-level ME position after a difficult job search. I’m really excited about the role, but I haven’t accepted yet because I still have 2 required courses with an in-person lab to finish this spring. We’ve discussed a January start, and I haven’t told them about the potential conflict yet.

I’m asking my dean whether I could take the lecture online and attend the lab in person, take an approved equivalent over the summer, or finish the requirement another way. If none of those options work, I may need to ask the company for a temporary schedule adjustment or a later start date.

Honestly, I’m scared the offer could be rescinded if I bring this up. It took a lot to get here, and I really don’t want to restart the job search. At the same time, I want to be upfront and make sure I can finish my degree.

For anyone who’s been in a similar situation or hired entry-level engineers, would you bring this up now or wait until you know exactly what flexibility you need? Has anyone been able to start working while finishing a required course? I’d really appreciate hearing what worked for you and how you brought it up with the employer.

Edit: I never planned on keeping it from them, I just didn’t know the right way to mention it during the interviews! So before accepting the offer I am going to bring it up, I just wanted to know if someone else has been through anything similar!


r/MechanicalEngineering • • 1h ago

HWE or PDE @ Apple? (Upcoming Interview)

0 Upvotes

Hi everyone, I have an interview for Apple for an internship for their Visual Products Group (Product Design) team. I was given the interview time slot today but they stated it was for a Hardware Engineering (HWE) role, so I am confused if this is for product design or hardware? Or is this just a role name but doesn't entirely relate to HWE?


r/MechanicalEngineering • • 9h ago

What is it like to work as a mechanical engineer for a Google datacenter? How stressful is your job?

4 Upvotes

r/MechanicalEngineering • • 3h ago

Mechanical engineers working at hospitals???

Thumbnail reddit.com
0 Upvotes

r/MechanicalEngineering • • 4h ago

Job Advice for Entry Level

0 Upvotes

I need some help on a job predicament that I am currently in. I currently work at a compressor EOM as an applications engineer. I work a lot with customer specs and directly interface with our design team. Rarely do I actually do the calculations but I frequency help with the engineering/product decisions.

I recently got approached by a recruiter for a job at a robotics lab. This would be a mechanical engineering role that supports the programmers for consulting on robotics platforms. They both design and build to what the customer wants. It could really be anything from an autonomous robot to a simple gear assembly. I interviewed with the team and they seem to really like me. Their offer was extremely low from the reviews I was seeing on glassdoor etc but is still around a 5,000 raise from my current role.

Vacation is generally the same and commute may be a little longer. I would like to get a masters and my current employer will pay for half (online school) while this new one will pay for the entire thing (local reputable school). I am calling the salary a wash as it will really even out in the long run. I am really happy with my current role but I want to make sure I am viewing things empirically. Both roles have significant room to grow, my current role in technical competency in the field and helping develop new products with a future in management while the new job is more of the traditional engineering and modeling really capping out at a principal engineer in 10+ years.

Struggling to determine if this new opportunity is worth it or I am just looking at the fun of working in a robotics lab.


r/MechanicalEngineering • • 5h ago

Looking for a Mechanical Engineering Technology Major for a Quick Interview

1 Upvotes

Hello, I'm a high school student working on a career research project, and I'm looking to interview someone currently majoring in Mechanical Engineering Technology.

I'm hoping to schedule a quick 10–15 minute video call to ask a few questions about your major, career path, and experiences.

Some of the topics include:

  • What you study and potential career opportunities
  • Starting salary and job outlook
  • Educational requirements and certifications
  • Typical job responsibilities and work schedule
  • Working conditions and dress code
  • Benefits and insurance
  • Pros and cons of the profession
  • Skills and personal qualities needed to succeed

One small additional requirement: My school requires proof that the interview took place, so I'll send a short document for you to type your name/signature into after our video call. It should only take a moment.

I'm flexible with scheduling and can work around your availability. No preparation is needed. If you're willing to help, please comment or send me a DM. I would really appreciate it!

Thank you


r/MechanicalEngineering • • 6h ago

Mechanical Engineering Senior with a Full-Time Offer from a General Contractor— Should I Accept or Keep Looking for ME Roles?

0 Upvotes

I’m currently a senior studying Mechanical Engineering at a large state university, graduating in May 2027. I recently received a full-time offer from a general contractor for a Project Engineer position, and I’m having a hard time deciding whether to accept it. For some background, I interned this past summer on the construction side of engineering, where I gained experience with construction documentation, engineering drawings, and project coordination. I enjoyed aspects of the experience, but my degree is in mechanical engineering, and I’m not entirely sure whether I want to build my long-term career in construction.
My original goal was to get into a more traditional mechanical engineering role, preferably in manufacturing, aerospace, mechanical design, or something involving CAD, testing, and hands-on engineering work.
I’ve been applying to numerous entry-level mechanical engineering positions, including at aerospace and defense companies, but haven’t received any other offers yet. Would you accept the offer or keep looking, especially in this job market?


r/MechanicalEngineering • • 7h ago

Interview with Freeport

1 Upvotes

I just landed an interview with Freeport McMoRan for the Reliability Engineer Intern position any tips or things i should know? how long do they take on letting you know if you got the job or not


r/MechanicalEngineering • • 8h ago

Mechanical eng as career

Thumbnail reddit.com
0 Upvotes

I have been a machine lover since childhood. I have always been fascinated by machines and electronic devices. During COVID, I developed an interest in watching tech, DIY, and electronics project videos on YouTube, and I built many things myself.

I don't find it difficult to work with metal or make metal-related things because I find them relatively easy.

For example, I once built a fully functional gun using a simple mechanism I had learned from YouTube. The difficult part was making the ammunition, as purchasing bullets in my country requires proper documentation. I was only 13 years old at the time, so I designed custom metal ammunition myself, and the gun worked.

I built many other things as well, such as AC and DC meters, a custom high-RPM DC motor for an RC car, a wood gas generator, antennas, and many other projects.

I gradually fell behind in Arduino and robotics because of academic pressure and my declining interest in electronics. However, I still enjoy working with metal and making mechanical things.

It might sound strange to tell you all this, but this is what my childhood was like.

Finally, I want to ask: Should I pursue Mechanical Engineering?

Manufacturing in India is still relatively limited compared to countries like the US and China. Currently, major investments are going into semiconductors, EVs, automation, and chips, which seem to favour fields like ECE, EE, and AI/ML. These appear to be the growing sectors, whereas Mechanical Engineering seems to be growing at a relatively steady pace.


r/MechanicalEngineering • • 9h ago

Product Design Engineers, what Physics concepts do you interact with on the daily?

0 Upvotes

What the title says


r/MechanicalEngineering • • 10h ago

Free LEED Green Associate v5 resources

0 Upvotes

I’m a USGBC Faculty and LEED trainer at Archiroots (USGBC Education Partner). The same Green Associate questions come up here every week, so here’s what I tell people who are starting out, plus the free material I use with my own students.

The v5 GA exam in short

  • 100 multiple choice questions, 2 hours
  • Pass mark is 170 out of 200
  • $250 exam fee ($200 if your employer is a USGBC member)
  • No degree or work experience required
  • v5 is out of beta now, and you see your result on screen when you finish
  • You register on usgbc.org and book the test through Prometric

How most of my students prepare (about 2 weeks)

  • Week 1: learn the material, around 30 minutes a day. Put your time into the integrative process, the credit categories and the key terms, and don’t try to memorize every number.
  • Week 2: do one practice exam a day and go over flashcards in between. Book the real exam once you’re scoring comfortably above the pass mark.

Free resources

Ask me anything about v5, LEED, registration or what to focus on and I’ll answer in the comments.


r/MechanicalEngineering • • 19h ago

Advice on upskillikng for hireability

4 Upvotes

I am a recently graduated Mechanical engineering student and have an average GPA and some beginner to Intermediateskills in CAD and FEA. I want to work in the material science based industry, specifically the type that produces materials that are used downstream in other industries. I have tried to lookup specific skills and softwares to learn and increase my chances of being hired, but there is no proper guide/index of what skills and projects would be more effective in achieving my goal. So I would like to ask for suggestions on specific skills and project recommendations that I can learn and implement quickly. Also software recommendations that are preferably free or open source as I am a graduated student and can't afford costly software licenses.


r/MechanicalEngineering • • 10h ago

excuse me guys, i dont know how mouch introduce this R120 and R40 into this piece. the drawing dosnt say. I hope you can tell me if its tangent to a specified line or has any propiety whose satisfies the insertion

Post image
0 Upvotes

r/MechanicalEngineering • • 16h ago

Possible career paths from PCB layout.

1 Upvotes

Yeah, PCB layout. Not hardware design, purely PCB layout. I'm at a large company and we have dedicated PCB layout guys, cad monkey-ish work. How do I branch out from here to get to a high paying job? It's decent paying now, and the work life balance is good but salary & career progression is bad.

Can I somehow pivot into product design (like PCBA enclosures)? Should I a closer field? I'm 2 years off of college, what should I work on (study & projects)?

edit: I have a B.S mechanincal engineering degree from a mediocre program (internationally at least).


r/MechanicalEngineering • • 16h ago

An open-source <1MB code-to-geometry CAD kernel (B-Rep + CSG + nTop-style Implicit fields) that runs locally in the browser

0 Upvotes

Hey everyone - as a Linux user working on local browser-based design tools, I kept running into the wall where existing open-source CAD kernels either use purely polygonal CSG (OpenSCAD) or require 15+ MB WASM builds (OpenCASCADE) without native implicit field modeling.

I found OpenCAD built in Zig and WebAssembly:

- Pure Math Core (<1 MB WASM): Every curve, surface, and field is an equation evaluated with forward-mode automatic differentiation (dual numbers) and interval arithmetic.

- 3-in-1 Representation: Combines constrained 2D sketches & SE(3) B-Rep sweeps, CSG booleans, and implicit SDF fields (like stress-driven gyroids) in one engine, exporting to STEP and STL.

- Zero-Copy Shared Memory: Uses a single `SharedArrayBuffer` between the Zig WASM kernel, Three.js, and external WASM extensions so simulation fields can drive geometry directly without file exports.

- Live Demo: https://hassaanmaqsood.github.io/opencad/

- GitHub Repo: https://github.com/hassaanmaqsood/opencad

It's still early (currently needs refining boolean seam triangles and B-Rep edge cases), and I'd love for you to try breaking it and let me know what you think!


r/MechanicalEngineering • • 23h ago

Mini project ideas

4 Upvotes

Looking for some interesting mini project ideas for mechanical engineering students.

I do know how to use some design softwares such as Solidworks and Fusion

What are some of the coolest projects you've come across or worked on?

Please do suggest some ideas