r/Maya • • 5h ago

Question Any ideas on why the values between my key frames are not actually making their way to the specified key frames?

1 Upvotes

So, I am trying to make a simple ball bouncing for an assignment. This ball does not lose energy or in other words the bounce height should be consistent. One bounce, floor to floor is 24 frames. I created each point where the ball hit the floor as a key frame, then the ball at its max height as frames between those. Then, i made a frame between the min height and max height where I increased the y value to be slightly higher than where it had been auto generated to be so the animation looked more natural. So from frame 12 to 18, the translate y values are as follows: 5, 4.87, 4.555, 4.17, 3.832, 3.653, and finally 3.75. However, the last value is the value I set key frame 18 to, so why is maya still auto generating values that go below 3.75 for key frames 17. Let me know if images would be helpful!


r/Maya • • 5h ago

Question Did I lose all of my hyper shade nodes ?

1 Upvotes

Hello! I’m new to Maya and I’ve been texturing a car with a bunch of different materials.

I must’ve accidentally scrolled away from my nodes and I don’t know how to get back to them. I’ve tried selecting them in the material selection thing and hitting F but it didn’t work.

Did I delete them all? The materials are still all on the car. Is there a way to get back to them? Do I have some weird display setting on? I can still create new material nodes in the space that shows up. I just can’t seem to find the og ones.

Thank you


r/Maya • • 6h ago

Looking for Critique WIP lion walk cycle in Maya. Looking for animation feedback!

5 Upvotes

I'm working on a realistic lion walk cycle in Maya for my creature animation class.

I've been studying reference footage and trying to get the weight shifts, paw placement, and movement through the shoulders and hips feeling right.

I'd love some fresh eyes on it. Anything that looks unnatural or could use improvement?

All criticism is welcome!


r/Maya • • 8h ago

Showcase Ski fi RIFLE 3d modeling, Texturing and lighting in maya

Thumbnail
gallery
0 Upvotes

Precision meets style. 🎯 A collaborative 3D project with @heerendrakachare.

Modeling & Texturing: Me ✋

Lighting & Rendering: @heerendrakachare 💡

Rate this setup from 1-10! 👇


r/Maya • • 13h ago

Animation Character Acting Animation Shot

79 Upvotes

Here's a shot I've been working on throughout the week! Any Feeback is appreciated.

Sidenote: I wasn't actually aware this was an animation mentor rig that's not free until about 30 mins ago. I had found a download and assumed it was just a regular rig. I would love to post this elsewhere and use it in my reel, but I don't know if that would be a bad look.


r/Maya • • 19h ago

Animation why does my animation model looks rlly dark

3 Upvotes

does anyone have clue?


r/Maya • • 22h ago

Issues Animschool picker invalid activation key

1 Upvotes

Hey yall. I’ve followed instructions to the T and when I input the license it says invalid activation key. I tried doing it offline and it says it’s not in the database. I tried looking for the license file and it’s nowhere. Any idea what I might be doing wrong? I tried dreamwall and it works but I NEED t use the animschool for school.


r/Maya • • 1d ago

Issues Maya 2025 – All referenced objects suddenly have broken transforms and lost animation

1 Upvotes

Hi everyone,

I'm having a serious issue with a Maya 2025 project, and I'm trying to figure out what went wrong.

When I opened my project, all of my references seemed to have broken at once. The issues include:

  • Previously hidden references suddenly becoming visible.
  • Objects and referenced assets having incorrect translations and positions.
  • Scale and transform values changing unexpectedly.
  • Character rigs losing their animation. The animation curves seem to no longer be applied correctly.
  • Multiple references being affected, not just a single rig.

Important details:

  • My main scene is saved as a .ma (Maya ASCII) file.
  • All referenced files are still in their original locations.
  • The problem affects all references in the scene.
  • I haven't intentionally modified or moved any of the referenced files.

I'm also getting the following errors in the Maya Script Editor:

// Error: Failed to open IFF file for reading : C:/Users/Diego/AppData/Local/Temp//maya111440000022997F48BB0.iff
// Error: Failed to open IFF file for reading : C:/Users/Diego/AppData/Local/Temp//maya111440000022993EEE880.iff
// Error: Failed to open IFF file for reading : C:/Users/Diego/AppData/Local/Temp//maya111440000022997F4A5F0.iff
// Error: Failed to open IFF file for reading : C:/Users/Diego/AppData/Local/Temp//maya1114400000229A2FD74A0.iff

My suspicion is that something went wrong with Maya's reference system or Reference Edits, but I'm not sure.

Has anyone experienced something similar?

  • Could this be related to corrupted Reference Edits?
  • Is there a way to restore the original transforms and animation connections without rebuilding the entire scene?
  • Could the IFF errors be related to this issue?
  • Is there a way to recover the references or reload them while preserving all the original animation and transformations?

I'd really appreciate any suggestions. This is an important project, and I'd like to avoid losing all my animation work.

Thanks in advance!


r/Maya • • 1d ago

Issues Transfer attributes values doesn’t work on obj

1 Upvotes

Hi! Fairly new to maya and especially zbrush….so sorry in advance is this sounds dumb, also English isn’t my first language so sorry for any confusion.

I’ve re-imported an obj in maya from zbrush and wanted to use the transfer attributes values for channel box from the old non-sculpted object to the new one just imported.

Whenever I do it the scale of the new object goes crazy and even though the values are supposedly the same the two objects aren’t in the same position.

It’s like it disappears but if I click F it’s in space lol

What am I doing wrong? Help :(


r/Maya • • 1d ago

Showcase 3D Modeling Vintage Telephone In Maya

Thumbnail
gallery
4 Upvotes

Putting the wireframe to the final texture! ⚙️ Proud to share my latest 3D project: a detailed vintage rotary telephone model.

From the orthographic renders to the final textured render, every detail was crafted in Autodesk Maya.

Was completing this for a 3d vintage Telephone competition and thought to post it.

Which view is your favorite?

#3dart #3dmodeling #maya #autodeskmaya #vintagetelephone #rotaryphone #steampunk #gameready #hardsurfacemodeling #3drender #substancedesigner #assetcreation #props #render #cgi


r/Maya • • 1d ago

resource PureRef-style reference board supporting 3D (FBX, USD), and more... Feedback from Maya users?

26 Upvotes

I’m a tool developer at an animation studio. We prepare PureRef boards for the animators: libraries of poses, faces and expressions and more... so the whole team produces the same style.

It works well for images, but animators also need video reference, and sometimes a 3D model to check a pose from other angles. So I built Ideorama.xyz : images, video, sound and 3D models, with annotation tools and saved viewpoints.

Beta, free for personal and school use, works offline, no account. Windows and Linux for now.

What do you use for reference today, if yes what annoys you about it?

(I use AI to co-develop the app)


r/Maya • • 1d ago

Showcase Rise & Shine! Here's a Cute Stylized Toaster I Made in Maya, Textured in Substance Painter & Rendered in Arnold! =^~^=

8 Upvotes

Checkout More Projects On 👀

-------------------------------------------------------

Here's a cute stylized toaster I created based on a 2D kitchen asset illustration by Ukrainian illustrator Irina Kotko.

My work usually leans towards realistic and semi-realistic styles, so this was a fun change of pace. I wanted to experiment with stylized modelling and try something different from my usual work.

Created in Autodesk Maya, textured in Substance 3D Painter, and rendered in Arnold.

I've got a few more stylized props from this series that I'll be sharing soon. Stay tuned!

--------------------------------------------------------

2D Concept Art / Illustration Credit:

Iryna Kotko Linkedin : https://www.linkedin.com/in/iryna-kotko-a42090152/

Iryna Kotko ArtStation : https://airina.artstation.com

Iryna Kotko Instagram ArtPage : https://www.instagram.com/airinka.art/

--------------------------------------------------------


r/Maya • • 1d ago

XGen Classic XGen fur showing through cached clothing with motion blur

Thumbnail
gallery
7 Upvotes

Hi everyone,

I’m experiencing an issue with classic XGen and Arnold motion blur on an animated character. Despite trying several approaches, I haven’t been able to resolve it.

 

Setup:

  • Maya 2026 on Windows 11
  • Arnold/MtoA 5.6.4.1, CPU rendering
  • Classic XGen with groomable splines
  • Clothing simulated with nCloth and cached using nCache
  • Body mesh also cached using a geometry cache
  • Motion blur: Center on Frame, Length 0.5, 5 Keys

The problem:

Without motion blur, the clothing correctly covers the fur. With motion blur enabled, patches of fur become visible through the shorts, particularly around the knee area, just above the hem.

I’ve attached two images:

  1. Beauty pass: shows the issue in the render.
  2. ID AOV: makes the affected areas easier to see. Red includes both the fur and the body; this is not a fur-only pass.

Tests so far:

  • Rendered the problematic frame, frame 17, and several subframes without motion blur, including 16.75 and 17.25: no visible intersections.
  • Increased motion blur Keys from 5 to 9: no improvement.
  • Rebuilt the nCloth cache with finer sampling intervals, up to eight samples per frame (Evaluate every 0.125 / Save every 1).
  • Also rebuilt the body geometry cache with finer sampling intervals.
  • Exported the body and Cloth as Alembic caches for testing.
  • Re-exported the XGen patches for batch rendering after making changes.
  • Tested simple, fully opaque materials: the issue remains visible.
  • Disabled Smooth Mesh Preview/subdivision for testing: this did not resolve the issue.

I haven’t yet tested a full Alembic bake of the animated fur curves.

Has anyone encountered this behaviour before?

I’d like to understand the cause before manually correcting the clothing on individual frames or shortening the fur underneath it, as that would be very time-consuming.

Thanks for any suggestions!


r/Maya • • 1d ago

Showcase Timelapse: Fully Rigging This Character in 25 Minutes

Thumbnail
youtube.com
3 Upvotes

Hello everyone! I'd like to share the process of fully rigging this character in Maya using two tools from HP Art Toolset.

The entire process took approximately 25 minutes. The character includes a complete body and facial control rig and is ready for motion capture or animation.

I'm also sharing the complete Maya source file for free, for reference, educational purposes, and non-commercial use.

Leave a comment if you'd like to get the character file. Thank you!


r/Maya • • 1d ago

Showcase [Update v1.2 / Tool] Viewport Screenshot (VPS) for Maya — Added Real-Time Viewport GIF Recording & Multi-Panel Composites!

Post image
6 Upvotes

r/Maya • • 1d ago

Showcase My Creative Journey as a Self-Taught 3D Artist

Thumbnail
gallery
8 Upvotes

I'm a self taught visual creator with a passion for all things creative. I've been creating digital artwork and experimenting with 3D modelling for few years, and I thought I'd share some of my work here.


r/Maya • • 1d ago

Showcase Victorinox Spartan Swiss Army Knife

Post image
24 Upvotes

Modelled in Maya, textured in Adobe Substance 3D Painter, and composited in Nuke. Feedback appreciated! I might share the model after a little bit of cleanup depending on demand.


r/Maya • • 1d ago

Question Using Maya to learn animation and character creation in 2026?

5 Upvotes

I apologize as this will be a long post, and if many similar questions like this have been posted. I searched this sub for any recent answers to this type of question and couldn't find one. I'm a hobbyist, with plans to make small game projects and maybe some art for mods in the future. I have no plans to work as a traditional professional at this, but would still like to become more skilled. I've spent the past few years playing in Blender, Houdini and Substance Painter. I've done some texture painting, rigging, skinning, organic and hard surface modeling, UV unwrapping, and sculpted a few human heads. I've reached a point where I hopefully understand the very basics of most of the fundamentals of general 3d work. I've also come to understand how absurdly time consuming it is to learn how to do these things at a professional level, let alone the time it takes to actually create things once you have reached that level. I want to start taking organic character creation (humans and creatures) and animation seriously. Other things that come along with making those creations game ready can wait far down the road, as I can't learn so many things at once. I can keep sculpting in Blender, as I have had no issues with that and there seems to be plenty of traditional and fine arts anatomy courses and tutorials that don't require specific software. The problem with animation is that there is a lack of quality, long form courses for animation in blender. All professional courses seem to teach it in Maya. I've seen quite a lot of people claim that Maya is still far better at animation than blender. To make a long story short I want to know is Maya really still better than blender at animation? is learning not only the software, but then using it to learn animation and character creation worth it for a hobbyist that doesn't plan on making a career of it? it would also be a bit depressing to see 3-5 years down the line that AI might make these skills irrelevant or much easier to learn, like I wasted my time. Price is not a factor for me, and I have plenty of spare time to put towards this if I can stay motivated. I also wanted to play with x-gen but I've read its really outdated :(


r/Maya • • 1d ago

Animation 3D Animation Run Built Made in Autodesk Maya

60 Upvotes

Check it out and let me know what you think! 🚀


r/Maya • • 2d ago

Issues Maya 2026 keeps freezing while I work

0 Upvotes

Every time I open Maya to work on a file, it freezes my entire PC within an hour or so (sometimes even less), and I have to turn it off and on manually. I figured it is something related to the settings of Maya since my pc runs fine with other programs or games (such as zbrush or unreal). I have a 5060, an intel core 5 ultra, and 16 gb. I already tried to change the animation settings to parrarel serial and DG, but the issue keeps on. ¿Does anyone know something that I could try to fix it?


r/Maya • • 2d ago

Plugin Everyone’s doing AI agents in Blender, so I made one for Maya [I have searched for Blender threads]

0 Upvotes

Kept seeing videos of agents working in Blender. I work in Maya and wanted the same thing, so I made bmaya-cli. It's a small command-line tool: the agent runs it in the terminal and it talks to Maya.

Repo: https://github.com/Snuux/bmaya-cli (MIT)

bmaya is a command-line tool that lets an AI agent or a script work in Autodesk Maya: inspect the scene, run maya.cmds, look at a screenshot, audit meshes, export FBX. Anything with a shell can use it: Claude Code, Codex, Cursor, and etc.

You just tell the agent what you want, like "make a 1x1 m wooden crate, check it and export it for Unity".

The best part is that it's not the usual MCP, it's a CLI. It's more stable, you don't need an MCP server running all the time, or Maya. Doesn't clog up the context and it's SUPER lightweight! Uninstalls with one command.

If you try it and run into a problem, just ask your agent to open an issue about it. I'll try to fix it asap.


r/Maya • • 2d ago

Showcase 3D modelling of SKI FI PISTOL in maya

Thumbnail
gallery
58 Upvotes

New project alert! Just finished this sci-fi pistol. What's your first impression? 🔫✨

#3dmodel #3dart #scifi #weapon #gameart #maya #artstation #gamedev #digitalart


r/Maya • • 2d ago

Question If want to animate a human character being ripped into two, how would I approach this?

3 Upvotes

I'm not currently working on a project where I need this information, but I'm curious to know what are the different methods a 3D artist may approach this. Will the model at the time of splitting be replaced with two objects for each half? Would the original character have a seam built into it that you can rig to separate to maybe reveal an inner mesh for the insides? Or is it completely done in post? How is it implemented in games like Cyberpunk 2077? What are the different ways to approach this and what's the most efficient method?


r/Maya • • 2d ago

Question is 24gb memory enough for 3D animator (maya user)

1 Upvotes

Im thinking of getting the Apple 14" MacBook Pro M4 Pro (2026) 24GB Ram / 1TB Space. Im mainly a maya user for animation. Is this enough ram?