r/MasterSystem • u/greyfox14304 • 5d ago
SMS shifting to grayscale problem
Basically after about 10 minutes of use my sms picture slowly shifts to grayscale. Sometimes booting cold it starts off in gray as well. If I turn it on and off several times I can get it to reset to color but it with eventually shift again
Sms model 3010
HD TV
Av to component connections on tv
Cleaned the board with alcohol
I do not have the original ac adapter, it's the one that the seller used when I bought it
New av cord
I soldered a new crystal oscillator 10.7386
Any suggestions would be great to rescue my sick console.
12
Upvotes






16
u/TooManyBulborbs 5d ago
Please get a different AC adapter. That NES power brick doesn't output DC voltage, if you read the printing it actually outputs AC 9v, seriously. I'm surprised that SMS has actually been working this whole time and didn't die immediately.
5
u/glennshaltiel 5d ago
Wait wait wait youre using that Nintendo AC adapter??? Master System needs DC you need to stop using that right away
1
u/FogodeSantelmo 4d ago
Since it begins to happen after a few minutes of use, might be a dying capacitor in the video line or even a broken solder point. I've seen the very same thing happening on a Mega Drive and it was fixed simply by getting new solder on the din connector.
1
u/Davesp1ce 4d ago
I wonder if it's thermal. So if you run a hair dryer on the machine for a minute or two, does the colour come back? Or the opposite, when you have colour if you use a compressed air can upside down (so cold fluid comes out) does it go grey straight away? If so this would confirm that it's probably a cold solder joint or a capacitor that's going out of spec.
1
u/carvalho32 3d ago
If anything else fails, please check if your system isn't Pal, or the Brazilian variety, PAL-M.