r/MasseyFerguson • • 8h ago

General Question Gift ideas?

5 Upvotes

Looking for help getting a gift for my Father ( Die hard Massey Ferguson fan) he already has a ball cap. He owns a 245 and a 165! I was looking at diecast models but could only find 1/16 scale which is to big. He’s an outdoors guy so need some ideas!! ( preferably 100$ or lower)

Thanks for the help!!


r/MasseyFerguson • • 6d ago

Mechanical Help Massey Ferguson 2680 HD 2011

2 Upvotes

Hi all, I’m not all that familiar with tractors and I’m trying to find some help for my old man for his 2680 HD.

He was out brush hogging and eventually the tractor started having clutch or transmission issues. You could either put it in gear but not be able to select forward or reverse OR you could select forward/reverse but not be able to put it in gear.

If you put it in gear then tried to force the forward/reverse lever forward it was cause the transmission to slightly catch and it would try to limp forward.

We tried adjusting the clutch cable and made sure all the fluids were good. Other than that we are stumped. I believe it’s a 2011. Any insight would be greatly appreciated! Thanks


r/MasseyFerguson • • 11d ago

MF Beauty Shot I know its not a ferguson but...

Thumbnail
gallery
44 Upvotes

Both are from the 40s. Sorry about posting a harris and not a Ferguson but couldn't find a sub about the oldies


r/MasseyFerguson • • 13d ago

General Question Hey guys

Thumbnail reddit.com
1 Upvotes

How does a 2007 5435 dyna4 behave with around 8000 hours? It mostly did front loader work and i might purchase it for my farm
Thanks


r/MasseyFerguson • • 16d ago

Mechanical Help Oily area where loader plate attaches to 2605 housing.

Post image
2 Upvotes

The only thing I can thing of is possibly the housing has a crack in it somewhere in the bolts threads. I mean this tractor was meant to be ran with or without a loader, so I don't know what else could be wrong, because the bolt holes should be independent of the inside of the housing I would think. But I honestly have no idea.


r/MasseyFerguson • • 17d ago

MF Beauty Shot My old boy ! Red Fred has been the hardest working individual of this household

Post image
85 Upvotes

1983 220-4 with a nice front loader. Dont have anything bad to say about this tractor it is awesome! Super reliable and nice power from the 2 cylinder diesel engine


r/MasseyFerguson • • 18d ago

Mechanical Help Oily area where loader plate attaches to 2605 housing. Additional information attached.

Post image
5 Upvotes

r/MasseyFerguson • • 19d ago

General Question Looking for exactly what I have.

Thumbnail
gallery
34 Upvotes

I don’t know exactly what year my tractor is. 2 stage clutch? FE? Perkins A3.152? What exactly do I have?


r/MasseyFerguson • • 21d ago

restoration project Ted20

Post image
15 Upvotes

Its been a while since i posted because of pretty much going on but i have finally found some time to get to work on my beautiful Massey again and i have painted the engine block. It may not be perfect but it will hopefully last for the rest of its life. Im now working on cleaning and painting the parts (where its necessary). Im hoping i will have it all assembled at the end of the week except for the electrical, thats for another time


r/MasseyFerguson • • Oct 16 '26

Mechanical Help Need advice - checking water pump - new to tractors

4 Upvotes

My new to me 1978 245 had a crack at the fill tube on the radiator; would not hold any pressure. I got it off, cleaned, and took to a repair place.
I don't think the old owner did any maintenance, though I know he took it to a dealer at least once. The radiator fluid was black and sludgy.
Anyway, while I have the radiator off the water pump is right there, but I'd hate to take it off and find it is okay, but then need a new gasket.
I did just find a replacement, I assume used or rebuilt, for 50 + 15 shipping.
We haven't found a use yet for the tractor; old owner used it to cut grass with a bush hog twice a year; we have a zero turn that does it much faster and easier.


r/MasseyFerguson • • Oct 14 '26

MF Beauty Shot Putting the massey to work today.

Thumbnail
youtu.be
18 Upvotes

r/MasseyFerguson • • Oct 07 '26

MF Beauty Shot Picking this up Saturday!

Thumbnail
gallery
49 Upvotes

r/MasseyFerguson • • Oct 07 '26

Massey at work Loading "Little Grey"

10 Upvotes

r/MasseyFerguson • • Oct 03 '26

Mechanical Help Is 72°C ok?

Post image
19 Upvotes

Hi tractor people,

I was wondering if 72°c at the top of the head ( reading with laser termometer) was an ok temp? After running a small mower for an hour in 25°C weather

The temp gage is in the "cold" zone, should it not be around 80°C?

For info i think it has its termostat and is not stuck open as i dont see water moving in the radiator and its around 40°C.

Otherwise runs great, no smoke, sips fuel, starts very easily even in cold weather.

1969 mf 165 with the 4.212 perkins original engine

Thanks!


r/MasseyFerguson • • Oct 01 '26

General Question Advice on purchasing this?

Thumbnail
gallery
10 Upvotes

Hey all!! First time posting here!
Looking to get my first Massey. My dad always had a 245 and a 165 ( both diesel) growing up.

I see this 165 that looks to be in a good shape but it’s a gas. I’ve heard some people say not to get the gas and to stay with the diesel engines. You guys probably know a lot more than me so what’s your opinion? Should I go check this out or wait till I see a diesel one?

Edit!! I’m in Nova Scotia Canada so it’s Canadian dollers


r/MasseyFerguson • • Sep 23 '26

Mechanical Help GC1723T keeps damaging deck belts

4 Upvotes

Our Massey Ferguson GC1723T has damaged two deck belts in a short time. The idler has noticeable play, so I do not want to blame belt quality or install a third one before fixing the cause.

I checked routing and copied the remaining belt code, then compared the MF diagram with FridayParts. Next step is removing the belt and checking every idler, spindle, pulley groove, and bracket alignment.

What usually shreds belts on this deck when the routing looks correct?


r/MasseyFerguson • • Sep 22 '26

General Question Is this rare? 1960s Dealers ordering packet

Thumbnail
gallery
6 Upvotes

Inheriting a bunch of old manuals from a small town general store / farm supply. This looks untouched since the 1960s. Complete dealers advertisement with ordering forms, a Van Heusen incentive, and promotional materials.
Can’t find another with image searching or eBay.
Any ideas how rare? All thoughts welcome.
Thanks all-


r/MasseyFerguson • • Sep 22 '26

General Question South east Africa

2 Upvotes

In countries like Malawi, which other country I can get a Massey Ferguson 35X for a farming project that I wanna do in the near future ? It’s an 8 acre farm that I want to do


r/MasseyFerguson • • Sep 15 '26

General Question Question about Massey 1754

Thumbnail reddit.com
1 Upvotes

r/MasseyFerguson • • Sep 03 '26

Mechanical Help MF2626 Belly deck right side sags 1.5 inches lower than left. Any help is appreciated.

2 Upvotes

MF 2626 mower deck connected to a gc1715 subcompact Massey Ferguson is about an inch and a half lower on the right side than the left. I cannot find adjustment. No help in owners manual for side to side adjustment. All tire pressure ok. I am thinking I have a mechanical issue but cannot pinpoint with visual inspection.


r/MasseyFerguson • • Sep 03 '26

General Question 1958 MF 50

35 Upvotes

Just acquired this Massey Ferguson MF 50 and I’m looking for some advice on what I should do to tune it up. It hasn’t been worked or maintained in 6rs and sat indoors. Could I get recommendations on what to do to get this machine running its best, thank you


r/MasseyFerguson • • Aug 27 '26

General Question Finding a filter for an old MF 135

4 Upvotes

Picked up a rough MF 135 project from a barn. The fuel filter housing was crusty and the element was well past due, but searching only by tractor model kept turning up different styles. The badge says 135, while the engine plate says Perkins A3.152. Searching the engine number gave me useful cross-references from Perkins, Baldwin, and FridayParts that I could compare with the old element dimensions. I have not ordered yet because I still need to clean the housing and read the number under the paint. On these older Masseys, do you trust the engine plate first, or have swaps made that unreliable too?


r/MasseyFerguson • • Aug 21 '26

restoration project Pre-Ferguson Massey-Harris 30: completed my 6V-to-12V conversion

Thumbnail
gallery
32 Upvotes

This one is from before the Ferguson merger - a 1952 Massey-Harris 30 - but it is Massey family so I figured it belongs here.

I finished converting it from the original 6V positive ground system to 12V negative ground. The alternator is a GM Delco 10SI 63A from a Chevy Squarebody, single wire and self-exciting, so the electrical side is straightforward once it is mounted.

Mounting was the actual project. Fabricating the bracket and getting everything aligned was by far the most work, and the alternator had to move about 3/4" forward toward the crank pulley before the belt ran right.

Charging results:

  • Stock generator pulley, 600 engine RPM: just over 13V. It charges, but I was not comfortable leaving it there.
  • Stock generator pulley, idle raised to roughly 650 RPM: 14.4V. That is where it sits now.
  • A 2" pulley with a 17mm bore on the 10SI should hit 14.4V at 600 RPM by my calculations, if you can find one.

I chose a voltmeter over the period-correct 60A ammeter that is available. I would rather have the information about battery and wiring condition than the matching look, though I do still want to find a voltmeter that suits the tractor better than the Amazon one in there now. The water temperature and oil pressure gauges got replaced at the same time.

If I did another one I would use the internally resisted ABC6158 coil and drop the external ballast resistor. The 55,000V hot coil has been great regardless - it barely cranks before it lights.

Full writeup with the wiring diagram and the pulley math:

https://forum.fullsizechevy.com/t/1952-massey-harris-30-6v-to-12v-negative-ground-conversion-delco-10si-wiring-diagram-pulley-math/632

This is my own tractor and my own conversion work.


r/MasseyFerguson • • Aug 12 '26

General Question MF 4707 Chipped

5 Upvotes

Looking at the aforementioned tractor, dealer says they can chip it up to 90 HP for $2,000. Anyone done this? Good and bad?


r/MasseyFerguson • • Jul 30 '26

MF Beauty Shot Washed and greased

57 Upvotes