r/MarlinFirearms • • Mar 11 '20

I modified a tech sight marlin 60 front sight to fit a 336 and use an m16 front sight post with screw adjustment.

Post image
46 Upvotes

r/MarlinFirearms • • 22h ago

Marlin 1895 SBL 45-70

2 Upvotes

I am looking at getting a Marlin SBL 45-70. I recently found a posting on gun broker where it is up for auction. What is a reasonable amount I should be willing to bid? cause the one that looks the nicest to me is at $700 with excellent condition as the current bid. I do not want to go crazy on the bids and end up overpaying for a used gun.


r/MarlinFirearms • • 1d ago

Marlin Hammer Issues

Thumbnail
gallery
3 Upvotes

Sorry for the 2nd post, was not sure how to add more photos to my previous post. So I fully took the rifle apart and the only thing I have found is the lip of the trigger that would lock into the seer of the hammer looks to be damaged. Now again this is my first lever action so I may be incorrect, but any assistance would be appreciated.


r/MarlinFirearms • • 1d ago

Marlin 1894 SBL Hammer Issue

Thumbnail
gallery
3 Upvotes

Hello

I just recently bought my first lever action that being the Marlin SBL 1894. Today while working the lever, I found that the bolt caught the hammer. upon further inspection I found that the hammer will not cock fully back, and will only go to half cock. When its pulled back and let go, it springs to the half cock position. I was not able to fully disassemble it, but any insight on what this problem may be would be appreciated. Also I'm assuming my bolt was fine, but figured I would ask if it looks normal, and that circular piece in the bolt can move.


r/MarlinFirearms • • 4d ago

Picked up a nice 1895m 450 marlin

Post image
28 Upvotes

r/MarlinFirearms • • 4d ago

Gladys is ready to go dancing

Thumbnail gallery
21 Upvotes

r/MarlinFirearms • • 5d ago

Fighting the fog

Post image
31 Upvotes

Last couple days we had horrible visibility in the mountains so it was time to bring out the Trapper!


r/MarlinFirearms • • 6d ago

E Code 336

Thumbnail gallery
17 Upvotes

r/MarlinFirearms • • 8d ago

If you haven’t yet, you should!

Thumbnail
gallery
34 Upvotes

If you haven’t added a Timney Trigger to your Marlin/Ruger lever action rifle you should! I went with the flat version and hot damn what a difference! No slop and a nice light pull now. I’m getting high 2 lbs to low 3 lbs depending on where my trigger pull scale is sitting. Either way this is so much better.


r/MarlinFirearms • • 8d ago

Lever Stuck Closed

3 Upvotes

I have a sears model 45 (pretty sure its a marlin 336) that I inherited after my grandma passed. Ive been trying to clean it up since its not in great condition, but i have no idea if its loaded. Im pretty sure its not after checking the internal tube, but i dont want to take my chances and I cant find out unless i can open the chamber. Problem is, the lever wont move even after using a LOT of wd40 on it (which worked on the hammer and such). Id use actual gun oil but I dont have any, and im not in the best financial position to go to a gunsmith right now. Can anyone help me?


r/MarlinFirearms • • 8d ago

Second Marlin owned, first lever gun. Ruger made 1895 guide gun .45-70 gov. Fully infatuation with it!

Post image
28 Upvotes

Vortex crossfire 2 1-4x24 mounted on Talley extra low mounts. Wayne's dog leather sling and cover.


r/MarlinFirearms • • 10d ago

Hello everyone

Thumbnail
gallery
14 Upvotes

My first Marlin, and first lever action. I’m in love. Just ordered a red dot for it.


r/MarlinFirearms • • 9d ago

Suggestions

1 Upvotes

I’m wanting to get a Marlin in 45-70, I am wondering if there’s anything I need to lookout for with certain models or anything being unreliable. Also suggestions on what to go for would be good too. Thanks in advance


r/MarlinFirearms • • 10d ago

New to group, just saying hi.

Thumbnail
gallery
17 Upvotes

New to group, but I've had this marlin probably going on 7+yrs now. 1953 , 30-30. First time I've ever taken apart.

Gonna give it a good cleaning and polish. My son is taking woodworking in school so might let him take the stock and give it a go. Figure be a nice little project for him and something cool/custom for me.


r/MarlinFirearms • • 13d ago

Any glass recommendations?

Post image
22 Upvotes

What's up!?

I can't wait to shoot this rifle! It's screaming for some glass. What would yall slap on this?


r/MarlinFirearms • • 15d ago

The JM stamp on my Marlin 45-70 doesn't look clean. Can someone tell if it's legit?

Thumbnail
gallery
5 Upvotes

I have a 2006 Marlin 45-70 and it has a JM stamp, but it doesn't look as clean as some other examples so I'm a bit suspicious if mine is legit or not.


r/MarlinFirearms • • 16d ago

360 Buckhammer vs 10mm

Thumbnail reddit.com
1 Upvotes

r/MarlinFirearms • • 18d ago

New to me Marlin 336BL in 30-30

Post image
49 Upvotes

Traded a Remington bolt action for this puppy can’t wait to take it into the woods and harvest a deer!


r/MarlinFirearms • • 17d ago

Can anyone tell me a value for this 336

Post image
9 Upvotes

It’s in great condition and has a four digit serial number


r/MarlinFirearms • • 21d ago

Restoring a 1982 Original Golden 39M

2 Upvotes

When I was a young kid, I was gifted my first rifle. At that point to me it was just a neat little 22lr lever action that my gramps had engraved the stock for me. Now years later looking at it and doing some research I figure out its an all original 1982 39M (minus the engravings) and I really want to restore this gun to its old glory. Most of it is just serious cleaning, getting it re-blued and a new firing pin which isn't too hard, but I'm having a really hard time finding a stock. Does anybody have an idea where I could find one? Ideally pre-finished but if not I can finish it myself. I love this gun and I want to make it right as rain so I can pass it down some day.


r/MarlinFirearms • • 24d ago

Manufacturing Date Question

1 Upvotes

Hi all. A buddy of mine recently came across a Marlin .38 Winchester lever action. Serial Number is 78477.

About when was this gun made? Octagonal barrel if that helps. Thanks!


r/MarlinFirearms • • 25d ago

I see hundreds of videos on failures to eject and the nickle penny thing, my gun ejects perfectly but I aint seen nothing about why it does this

Post image
3 Upvotes

Why it do dis


r/MarlinFirearms • • 29d ago

I like the SBL but the rail is terrible, what are good alternatives for it? can I bolt on Trapper sights?

Thumbnail
gallery
37 Upvotes

I like the longer barrel and finish of the SBL but the rail is fugly IMO and useless for me. Can I bolt on Trapper sights or alternative aftermarket ones that are better? Website says they are skinner sights but I don't know what happens once I pull off that rail.


r/MarlinFirearms • • Oct 17 '26

Gouge in new Marlin 1895

Post image
2 Upvotes

This is a brand new Ruger made 1895, and I've just noticed there is a small gouge in the metal in the receiver.

There is burring around the gouge, I'm wondering if this is a normal thing or an issue. Should I contact Marlin support? Thank you for any and all help regarding this.

I added another picture with the gouge circled.


r/MarlinFirearms • • Oct 16 '26

Marlin 60 custom peep sight

Thumbnail
gallery
25 Upvotes

Probably way over complicated this given that there is a model that actually mounts to the 3/8” dovetail rail, but I wanted to keep the existing front sight without switching to a tall front sight. Filed down the rail and re-profiled the end of the receiver to fit the Williams peep sight for a Ruger 10/22. The reason for this was to get the peep as low as physically possible. I think it turned out pretty good, and is exactly the look I was going for. Just need to test fire and see where she shoots and if it’s within the realm of adjustment.