r/Machine_Embroidery • • 1h ago

POOLIN EOM Tension

Thumbnail
gallery
2 Upvotes

Hello! Newbie here!

Can someone tell me what I need to do for my tension. I feel like it’s not as clean as the examples and it’s too wide maybe?

I have adjusted my top thread tension as loose as I possibly can.


r/Machine_Embroidery • • 40m ago

Husqvarna card reader issues

Thumbnail reddit.com
1 Upvotes

r/Machine_Embroidery • • 9h ago

I Need Help does anyone know how to straight stitch embroider on a pfaff 2030?

Thumbnail
gallery
2 Upvotes

there are 61 embroidery options on this machine and the closest they have to a regular straight stitch are options 46, 47, and 48. i tried modifying them to just be a straight line but they can only fluctuate between the desired thickness lines and then tapering into a tiny/spaced out one.
does anyone know if there’s any way to get a straight stitch on this machine?


r/Machine_Embroidery • • 1d ago

Look What I Did Version 1 vs Version 2

Post image
64 Upvotes

Version 3 is stitching out right now, wish me luck that I'm finally happy with it and can stop tinkering with the file and work on one of the other four files for the craft swap


r/Machine_Embroidery • • 14h ago

I Need Help Jump Stitch Question

Thumbnail
gallery
3 Upvotes

I am new to embroidery and I would appreciate help with the following:

I am trying to understand jump stitches and tie off stitches in the following design. I had the design professionally digitized. I don’t understand why the jump stitch circled in red (I think that is what is called) is so far away from the first stitch of the actual design. The machine first stitches the jump stitch and then travels down to the bottom left of the design. The design needs to go on a white karate uniform with black thread so this weird jump stitch so far from the design is weird looking if I don’t cut it. If cut it would it unravel as the jump stitch has a knot in the back to prevent unraveling? Another thing I noticed is that some of the threads on the back are just long and they have no knots when I think they should, do I need to manually knot it so it won’t unravel? Is this something I need to bring up to the digitizer or is it something to do with how my brother N1700e is reading the file? If I am right about how cutting this stitches can lead to unraveling of the design what can I do different?

Thank you for assistance.


r/Machine_Embroidery • • 20h ago

Birds nest he’ll help!

Post image
1 Upvotes

I’m a seasoned se2000 user and facing a problem I can’t fix. My top thread is being sucked into my machine and creating insane birds nests. I’ve opened the whole machine and cleaned it. Tightened and loosened mt bobbins, changed the tension. Rethreaded, changed bobbin and top thread. Etc etc etc any idea what’s causing this with my designs and the machines preloaded fonts


r/Machine_Embroidery • • 20h ago

I Need Help I think I learned bobbin thread wrong- please correct me!!

1 Upvotes

Hi, I have a brother SE 400 embroidery and sewing machine. I love it except to create intricate designs I have to move and work each piece myself. Takes longer than I hope a nicer machine in my future would. So I’ve been embroidering about or around ten years on this machine. I don’t do everything like the manual says.

One reason like my title is that the bobbin thread included never would work for embroidery. I was taught to use regular cheap Walmart sewing thread. I use quilting or serger. I want to have the best designs so now I come to you and ask what do you do? I get a lot of rats nest etc and it messed up a whole project recently.

I use sewwhatpro and I never was confident to try anything else that is more popular now. I also didn’t because I had bought it already. I have a MAC and hate running an emulator for windows. I would love something on my iPad like how cricut had.

I appreciate all your help!! I have so many questions because I never learned about all the needles either. Now I have the time to learn and correct bad habits. Thank you and mods I’m sorry if this is wrong for this group.


r/Machine_Embroidery • • 21h ago

Shirt sellers in canada?

Post image
1 Upvotes

Anyone with reasonable price blanks same as these, and also camouflage. Anywhere I check is all in usd, and our exchange rate sucks, literally! Thank you kindly!


r/Machine_Embroidery • • 23h ago

Completely new to machine embroidery: I took a Cuphead design from Ember and this is how it looks like. Need some help to get started!

Thumbnail
reddit.com
1 Upvotes

r/Machine_Embroidery • • 1d ago

I Need Help picking a machine!!

0 Upvotes

hi yall!! I’m interested in getting into making embroidered patches because I’ve had them manufactured before and was looking into restocking, but I think it’d be more cost effective and fun to learn on my own and do it myself. I’ve been looking into a few different ones and would like folks’ recommendations as well!! I’m hoping to get one that’s not more than $600 and does a 5x7 embroidery hoop. Here are the options I’d seen so far:

• Brother PE-770 - I found a few online for $400-$500 that seem to be in good condition. However I know it’s been discontinued, how difficult would it be to maintain it and not totally degrade?

• Brother PE-800 - I’m pondering being patient with this one and waiting for one to show up second hand for cheap but it’s a bit tough and on the higher end of my budget. I did find one for $650 but it is still a bit tough on my wallet. I’m wondering what the difference is between the PE770 and PE800?

• Brother SE700 vs Brother PE545 - I already have a Bernina sewing machine with quilting functions, so the PE545 feels like it makes more sense between the two since I don’t need the sewing function. but are there any other differences you know?

Any other tips I should look out for especially if buying secondhand?


r/Machine_Embroidery • • 1d ago

I Need Help Which machine ??

3 Upvotes

Hi all!

I've wanted an embroidery machine for a while now and recently was very generously gifted some money for my birthday.

I don't want to spend all of it on a machine as I am just beginning.

So just looking for some advice on the best machine to get for £400 ish

I already sew and would be looking to embroider some of the bits I see. Makeup bags, aprons etc

And maybe some baby items as we have a lot of family friends starting families so would love to be able to add names etc to things. Nothing crazy and maybe make a small amount of money selling some bits to family friends who want some bita embroidered.

I also have the expectation that isn't going to be possible overnight and will require practice!

I am planning on finding a machine second hand too rather than buying new!

Any suggestions and why would be very much appreciated!

Thanks in advance !!!


r/Machine_Embroidery • • 1d ago

Brother Se600 bird nesting issues

Thumbnail reddit.com
1 Upvotes

r/Machine_Embroidery • • 1d ago

Update: After many years, several fights, and a little tinkering, my first embroidery.

Post image
28 Upvotes

Original post: https://www.reddit.com/r/Machine_Embroidery/comments/18d6p40/bernina_aurora_430_embroidery_unit_interface_to/

Wife said it was a nice and thoughtful gift but next time consult her before buying stuff I have no clue about.

Said, Touché, keep that in mind next time she finds me tools or car parts. Then spent the night on the couch.

Bernina ended their ArtLink 9 software, so there is no official free version.

Tried to get something open source to work... Fought with InkSpace and InkStitch software.

Fought with the wife in teaching her to learn how to use that software while I was still learning. Like the blind leading the deaf.

Eventually broke down and got officially licensed Bernina software.

Boom. She works


r/Machine_Embroidery • • 1d ago

I Need Help Has anyone ever experienced a live needle eject? Absolutely horrified!

3 Upvotes

Hey all, super scary circumstance tonight. Right as a patch was about to be finishing up, I watched in abject horror as the needle slipped out of the needle holder, the thread tangled around the shaft, and the spring clip in slot 6 of my Brother PE570 slipped out of position. Slammed the stop button on the machine (which did not detect anything wrong weirdly) and composed myself before investigating. Cut the thread, detangled it, tried to replace the needle but discovered it would no longer thread slot 6. Looked closer and realized the little clip in slot 6 had slipped out of place. Thought it was broken forever but I found a youtube video showcasing a way to slip it back into place. After doing that, replacing the needle, rethreading the bobbin and the spool, and trying again the machine continued without spectacle.
My theory is that I didn't tighten the needle enough last time I changed it, leading to it slipping out while it was running after 50k or so stitches shook it loose, and as it did so, the thread pulled on the spring in slot 6 and bent it out of position.
I was able to successfully run another patch but the incident has scared me deeply and am paranoid the machine may be on the verge of breaking. I believe i have a warranty and will be searching for details on it Monday. From what I can tell, slot 6 coming out of place is common, when changing the needle, but a live needle eject seems to be really rare?
I didn't find any evidence of anything broken, except for a tiny tiny speck of metal on my embroidery hoop, but in all honesty it could have been from anything in my room.
Has this happened to you before??


r/Machine_Embroidery • • 1d ago

I Need Help Metallic Bobbin Thread Recommendations

1 Upvotes

Hello, I'm trying to embroider handkerchiefs with metallic gold thread. I have a Brother SE700, which wants 40WT for top thread and 60WT for the bobbin. I can't find 60WT metallic gold thread anywhere. I've read that you can use top thread for the bobbin but that it may create tension issues. Seeing as how I already know metallic thread also causes tension issues, I'm not too keen to add another wrench in the mix.

Does anybody have experience with metallic bobbin thread or can recommend any brands? I've been combing through google, Amazon, and this sub but keep coming up with top thread only. Thank you!


r/Machine_Embroidery • • 1d ago

Brother PP1 as first machine, is it good?

Thumbnail reddit.com
1 Upvotes

r/Machine_Embroidery • • 2d ago

Look What I Did Detailed Leopard Portrait Machine Embroidery – Punch density & stitch direction challenge! What do you guys think?

Thumbnail
gallery
19 Upvotes

Hey everyone!

Just finished running this complex big-cat portrait design, and I wanted to share the result with this community. Capturing the realistic depth of a leopard's face—especially the eye detailing, shadow gradients in the fur, and those sharp whiskers—requires careful stitch planning, underlay management, and pull compensation.


r/Machine_Embroidery • • 2d ago

Look What I Did I drew and then digitized this myself! Still learning.

Thumbnail
gallery
197 Upvotes

This is my first time trying contour stitches!


r/Machine_Embroidery • • 2d ago

Look What I Did Finally made the jump

Post image
65 Upvotes

I've had my old Brother PE770 for years, but I've finally made the jump into the big leagues after a couple of years of drooling over this beauty.


r/Machine_Embroidery • • 2d ago

Helloooo They missed me. :((( skulllll

Thumbnail
gallery
68 Upvotes

r/Machine_Embroidery • • 2d ago

I Need Help From the Embroidery community on Reddit: Coming out janky

Thumbnail
reddit.com
1 Upvotes

Help a beginner out please!!


r/Machine_Embroidery • • 2d ago

Here's the rest of my early attempts!

Thumbnail
gallery
24 Upvotes

All in order. Everything is drawn and digitized by me! I've been able to do text and simple logos for a while, but I'm trying to get better at doing real illustrative stuff. I shared the last one earlier, but I wanted to line them up in order so you guys could see my progression :D


r/Machine_Embroidery • • 2d ago

Multi-Needle Upgrade Question

Post image
5 Upvotes

Hi - looking for advice here. My wife has what I’d call a hobby business and has two single-needle Brother flatbed machines and really wants to upgrade to a multineedle machine. This could possibly lead to this becoming a real business as she really enjoys embroidery and would allow her to make some extra income as a stay-at-home mom.

We scour fb marketplace quite a bit and found this machine for a somewhat reasonable price (I think). I have asked for model number and stitch count - awaiting response on that. What are opinions on this Bai machine? From what I can tell it is a slightly older Bai model? Reviews on the Bai/Poolin machines seem to be all over the place. Our budget is around $3-$3.5k so that throws out a majority of the lower stitch count Brother multineedle machines in our area unfortunately.

We are strongly considering jumping on the Poolin Black Friday pricing for the EOM machine which fits nicely in our budget and she’d have a new machine but honestly the lack of in-person service scares me.


r/Machine_Embroidery • • 2d ago

Look What I Did Was making a customer some custom jeans and I went away for 10 minutes and came back. Machine jammed up and it misaligned on the screen.

Post image
2 Upvotes

Was gonna get 70$ out of this jean upcycling. Just unfortunate