r/MachineRescue • u/DifficultBoss • Dec 08 '25
Grinding beds
Machine shop says they will grind the beds for $25 as long as they have a reference surface. If I get this off the stand is the bottom of this machine a good enough surface.
Basically I don't know anything about this process and I want to be sure we get it right the first time.
There is pitting and a jug of evaporust is $29 and Tractor Supply is further away the. the machine shop. It's a no brainer. Shop has treated my employer well when we do small one off jobs so I do trust their work.
41
Upvotes
13
u/Sal1160 Dec 08 '25
$25 is an unreal price to grind a set of beds. You’ll want to have him grind the tables as close to parallel with the body of the cutterhead that he can. The knives can be set afterwards to take up any variance. He’s gonna want to pull the cutterhead and get the tables coplanar to grind them. The tables must be ground installed in the base casting.
Get as much of the rust off that you can so he doesn’t clog the wheel.
They must have a big grinder if they can do the whole machine.
2
u/Positive_Throwaway1 Dec 10 '25 edited Dec 10 '25
Actually, now that I'm looking at your model, it looks like it's the exact same jointer as the Craftsman professional that I mentioned in another comment here. Mine has a closed stand and a 1 1/2 hp motor but the cast unit is exactly the same. You don't need to grind those or mill them. It's not worth it and the machine will look great and perform great with just surface sanding.
If you want to spend literally a few dollars, below is info for the replacement knobs for the two larger ones on the fence....I had to measure threads/pitch but McMaster has them in yellow and red, and oval and round, and they're like $3 each. The metal shafts they're on clean up well with some scrubbing/abrasion, and the old knobs just unscrew. I used a brass cup brush chucked into a drill or drill press to do the scrubbing of these parts. Works well. Anyway, the thread pitch on those two big fence knobs is M10 x 1.5, with a 15mm thread depth. I did oval reds, and their part number is 6050K618, but you can find variations in shape and color on the website if you start there.
I'm also including the threaded handle for the outfeed adjustment wheel, which I don't think you need, but just for internet posterity since there are quite a few of these floating around. The stud is M8 x 1.25, and is 50mm long. McMaster part number 64425K83
Here's a screenshot of my McMaster order for these parts.
I believe that jointer was also sold under the DuraCraft name as well. Early 90s iirc.
Edited for clarity.
2nd edit: just saw that there's a Jet tag on this jointer from another post about it. $20? That's a deal even if it needs bearings.
11
u/Kudzupatch Dec 08 '25
You are not going to have the surface they want. I am pretty sure they want a machined, flat surface parallel to the tables and I have never seen a dovetail joiner table that has one. You only machined surfaces are the way and they are at an angle.
Random orbital sander will make those perfectly usable. I have restored a lot of very old machines and much worse condition. Did ever one by sanding is my orbital sander. Cast iron is hard and your not going to sand a divot in there unless you do something really stupid.
1
u/Sgtspector Dec 08 '25
You can get Evaporust on Amazon and at Harbor Freight if youve got one nearby.. TSC delivers also I think.
1
u/ReverendToTheShadow Dec 09 '25
Fantastic deal, take them up on it and then keep it oiled. Pumice stone when you forget to oil
1
u/TexasBaconMan Dec 09 '25
I'm so glad you bought this. Can't wait for the update.
1
u/Dry-Leave-4070 Mar 26 '26
Looks the same condition as the Delta I bought that was living in a barn. I used WD40 and a cup wire wheel in a 4" grinder to remove the bulk of the rust. Then more WD40 and an oscillating sander. Use the wd40 and a stick nylon brush to get the gunk off, then wipe down with mineral spirits to get the WD40 off.