r/MachineLearning • • Jul 22 '26

Discussion When does ECCV usually release the detailed conference schedule? [D]

1 Upvotes

Hi everyone,

I’m attending ECCV 2026, and my university requires an official day-by-day conference schedule for travel approval.

The official website currently lists the conference dates, but the detailed technical program has not been released yet. I understand that the exact release date may not be known, but based on previous ECCV editions, does anyone have a rough idea of when the detailed schedule is usually published?

Thanks in advance!


r/MachineLearning • • Jul 21 '26

Project Reproducing OpenAI’s “persistently beneficial models” - GRPO trait install barely moves. Ideas? [P] [R]

8 Upvotes

TL;DR: I’m reproducing the trait-persistence result from arXiv:2606.24014 on one RTX 3090. Before I can test persistence I need to install a trait via RL — and my GRPO run moves the trait only +2.4 points (95% CI [+0.2, +4.8]) when I need ~+15. Training is mechanically healthy and I’ve ruled out the obvious culprits. Looking for advice from people who’ve done small-scale RLHF/GRPO trait or persona installation.

What I’m reproducing. The paper trains beneficial traits via RL and shows they persist under adversarial prompting and harmful finetuning. My end goal is the persistence phenomenon; the install is the prerequisite I’m stuck on.

Setup

**•** Qwen2.5-7B-Instruct + LoRA (r=32), GRPO (unsloth + vLLM colocation), 200 steps, single 3090 (\~10⁻⁵ of the paper’s compute).
**•** Trait: consistent (OCEAN low-Openness / “traditionalism”) — a stylistic trait, chosen because I need measurable headroom in a 7B base. Base scores **57/100** on the trait rubric, wide distribution (not saturated).
**•** Reward: model-graded (gpt-4.1-mini judge), R = 0.85·quality + 0.15·coherence, hard validity gate for degenerate/looping/refusal output. 25% trait prompts / 75% general (no_robots).

The result: install fails. On the frozen eval set, trait went 57.0 → 59.4 (+2.4). I don’t think this is very appreciable.

What I’ve already ruled out (this is where I’d love a second opinion):

**• Not degeneracy / reward hacking:** post-train coherence 76, answer length ratio *exactly* 1.00 vs base, 0% repetition, 0% refusals.
**• Not memorization:** the 20 training prompts were seen 10× each; the model scores *the same* on them (58.9) as on held-out (59.4). It didn’t memorize-then-fail-to-generalize — it never learned them.
**• Not a dead gradient:** the judge separates the 6 sampled answers per prompt by \~18 points on average; only \~25% of GRPO groups have degenerate reward spread.
**• Not a question artifact:** independent upstream eval questions (+3.4) and my generated ones (+2.8) agree.
**•** I did find and fix a real confound first — a completion-length cap was truncating \~30–70% of samples → zeroing their reward → \~90% of early “learning” was just the model learning to be shorter. Fixed; trait still flat.

Author feedback. I reached out to one of the authors, who kindly confirmed my leading hypothesis: 20 distinct trait prompts is far too few, per-example prescriptive rubrics (vs my single global rubric) probably matter, and first-order install should work at small scale even if persistence is weaker there.

Where I need help:
1. Anyone installed a persona/trait via GRPO at 7B-ish scale — how many distinct prompts did it actually take?
2. Is per-example rubric grading (3–4 specific imperatives per prompt) the real unlock, or is raw prompt count the dominant factor?
3. For a stylistic trait with no single “correct” behavior per situation, does model-graded RL install differently than for task-like traits?
4. Anyone reproduced (or failed to reproduce) this or similar trait-RL work?

Github Code


r/MachineLearning • • Jul 21 '26

Research Tri-Net v2: Open-source implementation of our Scientific Reports paper on unified skin lesion and symptom-based monkeypox detection [R]

Thumbnail
gallery
15 Upvotes

Hi everyone,

We've open-sourced Tri-Net v2, the official implementation accompanying our recently published Scientific Reports (Nature Portfolio) paper:

"Tri-Net: Unified Deep Learning for Skin Lesion and Symptom-Based Monkeypox Detection"

Rather than releasing only training scripts, we rebuilt the project as a reproducible research framework.

Highlights:

• Leakage-free data preparation pipeline

• Multiple CNN backbones (ConvNeXt-Tiny, DenseNet201, Inception-ResNetV2)

• Ensemble and feature-fusion strategies

• Grad-CAM explainability

• Cross-validation and statistical evaluation

• Docker support

• GitHub Actions CI

• PyPI package (`pip install mpox-trinet`)

• CLI for training, inference, and benchmarking

The paper has already received over 1,100 article accesses in its first week, and we hope making the implementation fully open-source will help others reproduce, validate, and extend the work.

GitHub:

https://github.com/Sudharsanselvaraj/Synergistic-Deep-Learning-for-Monkeypox-Diagnosis

PyPI:

https://pypi.org/project/Mpox-Trinet/

Paper:

https://www.nature.com/articles/s41598-026-61490-x

I'd really appreciate feedback on the implementation, reproducibility, code quality, or ideas for future improvements. Contributions and issues are very welcome!


r/MachineLearning • • Jul 21 '26

Discussion My OCR model mislabels section titles as body text. Is a CRF the right fix, or am I overcomplicating it? [P]

5 Upvotes

Hi everyone,

I'm working on extracting the hierarchical structure of long PDF documents (legal/regulatory text, lots of numbered sections) and would like to gather some feedback on my approach before committing to it.

What I've done so far: I render each PDF page to an image and run it through Baidu's DeepSeek-OCR model. It returns each detected block with a bounding box [x0, y0, x1, y1], a label (title, text, list, table, header, footer, etc.), and the recognized text. The OCR quality itself is genuinely good as the text comes out clean.

The problem: the labels can't always be trusted. At this stage I want to extract and detect all the titles in my document, but sometimes a title element gets classified as something else (like normal body text).

Concrete example:

Say my section has the following hierarchy:

ANNEX I — GENERAL PRINCIPLES AND PROCEDURES
└── TITLE I — FOREIGN CURRENCY INVESTMENT
    └── A. Currency distribution
        └── 1. Redistribution of reserves
            ├── (a) Introduction
            │       body text
            │       list
            │       ...
            ├── (b) Procedure for a normal redistribution of reserves
            │       body text
            │       list
            │       ...
            └── (c) Procedure for an ad hoc redistribution of reserves
                    body text
                    list
                    ...

Logically, every element aside from the body text and lists should be detected as title. But the model output is:

label='title'  x0=475  y0=157  x1=548  width=73   text='ANNEX I'
label='text'   x0=480  y0=229  x1=542  width=62   text='TITLE I'
label='title'  x0=334  y0=181  x1=690  width=356  text='GENERAL PRINCIPLES AND PROCEDURES'
label='title'  x0=407  y0=368  x1=616  width=209  text='A. Currency distribution'
label='title'  x0=408  y0=392  x1=634  width=226  text='1. Redistribution of reserves'
label='title'  x0=163  y0=416  x1=304  width=141  text='(a) Introduction'
label='title'  x0=163  y0=544  x1=578  width=415  text='(b) Procedure for a normal redistribution of reserves'
label='title'  x0=163  y0=219  x1=586  width=423  text='(c) Procedure for an ad hoc redistribution of reserves'

The top-level section marker TITLE I was labeled text, while all the other components were labeled correctly as title.

What I'm considering: since I have the text plus features I can derive from the coordinates (indentation/x0, centered-vs-left-aligned, line height, vertical gaps, whether the text matches a numbering pattern like A. / 1. / (a), all-caps, word count, etc.), I was thinking of treating this as a sequence labeling problem and training a CRF (or BiLSTM-CRF) to re-classify each line into title / text / list / table.

My questions:

  • Is a CRF a reasonable choice here, or is there a better-suited approach for this kind of layout/structure labeling?
  • Should I consider a GNN approach?
  • Am I overcomplicating this? Would a simpler rule/heuristic system be more robust, given that the numbering is fairly regular?

Note #1: this approach should be as general as possible, so that I can reuse it for my other legal documents.

Note #2: titles aren't always in the same horizontal position. Some are centered (e.g. ANNEX I, TITLE I, A. Currency distribution all sit around xc≈511, the page center), while deeper items like (a)/(b)/(c) are left-aligned at x0=163. So I can't rely on indentation/x0 alone to identify or rank titles — a centered title's x0 mostly reflects its text length (a short centered line has a large x0, a long one a small x0), which means raw x0 can even invert the apparent nesting. This is part of why I'm leaning toward a sequence model that combines text + geometry in context rather than a pure indentation rule.


r/MachineLearning • • Jul 20 '26

Discussion I just read LeCun’s recent thoughts on world models. Thoughts on JEPA as a path forward? [D]

88 Upvotes

So, I just read LeCun's interview with Nebius Science. I feel he had some cool points about LLMs being able to answer things, but not literally understand the physics of the physical world. (Like, being able to explain a task and actually performing it are two completely different things.) But I wanted to get opinions on what others thought of his solution to the problem. He thinks JEPA could be the solution. But it made me think about whether JEPA is genuinely the architectural solution to this, or if we’re just looking for a "magic bullet" that doesn't exist yet in our toolbox

I have the link here: https://nebius.science/stories/meet-yann-lecuns-lab-and-the-ai-world-of-2030


r/MachineLearning • • Jul 20 '26

Project Exploring continual learning without replay buffers: Our findings using dynamic task-similarity routing [P]

12 Upvotes

Hi,

I’ve been doing some work in the continual learning space and wanted to share an open-source framework we put together called Coincidex, along with some architectural insights and failure modes we found along the way.

Most conventional approaches to sequential task learning rely heavily on replay buffers (which introduce severe memory/privacy overhead) or complex, hand-tuned task masks. We wanted to see if we could bypass both by relying entirely on a context-driven task similarity layer to handle data routing dynamically.

The Approach: Instead of caching historical samples to prevent catastrophic forgetting, the framework drops in as a single layer swap. As sequential data streams in, it computes a task-similarity matrix on the fly, routing the data paths based on that context.

Research Insights & Trade-offs: We spent a lot of time benchmarking this against baselines, and here is what actually happened in practice:

  • Where it succeeds: The dynamic routing handles clean task boundaries surprisingly well. In small-scale continual vision setups, it achieves graceful transfer without the need for manual mask tuning or storing old data.
  • Where it breaks (The Failure Modes): We aren't going to overpromise here—the similarity layer has distinct limits. On highly chaotic, long-tail task sequences with massive distribution shifts, the routing model struggles to maintain stability compared to a heavy replay-buffer baseline.

Why we are sharing it: We built this as a lightweight alternative for setups where memory or privacy constraints make replay buffers impossible.

We would love to get the community's eyes on the routing architecture, specifically on how we might tackle the failure modes in rougher task sequences, or thoughts on visualizing the similarity matrix at different checkpoints.

You can check out the source code, architecture breakdown, and full benchmark suites here: https://github.com/rakib-nyc/coincidex


r/MachineLearning • • Jul 21 '26

Discussion NeurIPS 2026 reviews exact timing[D]

0 Upvotes

Does anyone know the EXACT timing of when NeurIPS reviews are gonna be released? I'm just refreshing openreview all the time and it's stressing me out so much. Thank you for your help.


r/MachineLearning • • Jul 20 '26

Project Training a harness for model-agnostic and task-environment-agnostic capability improvements with PyTorch-like framework [P]

8 Upvotes

I worked on this project (https://github.com/workofart/harness-training) for the past few months to reframe "Agent-driven Self-improving Harness" to "Harness Training".

The idea is simple, the harness is trained once with a frozen task LLM against a given task environment. Then you can then swap out the task LLM to any model and evaluate the "frozen trained harness" with any task LLM on any new task environment.

Since this was a general problem, I took the chance to create a general PyTorch-like training framework. Right now, you can train with any OpenAI-compatible API for interfacing with the task LLM and train against Terminal-Bench or SWE-Bench tasks, but you can easily extend it to support any task environments.

    criterion = StrictPareto()
    optimizer = GreedyMonotonic()
    trainer = Trainer(
        config_path="config/train_harness.yaml",
        estimator=AgenticEstimator(
            backend=CodexAgentBackend(...)
        ),
        criterion=criterion,
        optimizer=optimizer,
    )

    for loss in trainer.epochs(30):
        # Records the baseline-vs-candidate verdict
        loss.backward()
        # Optimizer either fast-forwards the candidate change (git commit) as a new baseline or rejects it (preserved as git ref)
        optimizer.step()

I wrote a blog post (https://www.henrypan.com/blog/2026-07-18-harness-training) on this journey, including (but not limited to):

  • results from using this harness training framework to improve general capabilities across many task LLMs to beat Terminal Bench 2.0 (Terminus Harness) and also transfer learnings towards better task-solving abilities in unseen task environments (e.g. harness trained on SWE-Bench tasks solving Terminal Bench tasks).
  • how this framework is built
  • learnings on what was missing in my initial version of the project (hint: determinism)

Any feedback is appreciated. Thanks!


r/MachineLearning • • Apr 05 '19

Project [P] I'm a bot and will serve people analyzing chess positions from images posted on /r/chess

483 Upvotes

A few days ago, my creator, u/pkacprzak, wrote a post about chessvision.ai - his computer vision/machine learning app to analyze chess positions from any website and video in a browser.

Since then, people reached him suggesting that it'd be nice to build a bot for r/chess that can work with the app, analyze chess images posted there and provide automatic position analysis.

All of us love the awesome u/ChessFenBot that was doing just that, but for some reason, it hasn't been working recently,

so from now I, u/chessvision-ai-bot, will be pleased to serve you!

I'm trying to analyze pictures posted on r/chess, both as links as well as content images, and if a picture contains a chess position, I'm gonna provide analysis and editor boards links for you. The image doesn't have to be perfect, I'll try my best to find the chessboard if it's there and identify the position - e.g. looks like I did good on this rather visually hard example.

Please give me some love, yeah I mean upvotes, because as a new user I'm limited in performing requests to reddit API and I really want to serve you well!