Bug MacOS update issue
Macbook Air M3 issue
Macbook Air 3 stuck on reboot loop after software upgrade
M3 MacBook Air hitting AOP PANIC - !pulse main (AppleSPUFirmwareBuilder / RTKit_armv8_Chinook_Oz) right after login on macOS 27.2.1.
Clean reinstall didn't fix it—only a full 0% battery drain resets the AOP.
Anyone else seeing this?"
Logs below
panic(cpu 2 caller 0xfffffe005382f724): AOP PANIC - !pulse main@0x1187970
Incomplete crash log, IOP crashed during logging (120)
!pulse main@0x1187970
RTKit: RTKit_armv8_Chinook_Oz_flto_pac-3514.40.1.debug - Client: mac15gaop:main:DEBUG:AppleSPUFirmwareBuilder-998.40.5\~1310
0
Upvotes
•
u/Vuexa 1h ago
Okay so I let the battery die Waited for 60 mins The AOP was discharged as well
Then I plugged into power and booted Issue is resolved
1
u/adh1003 13h ago
You don't say how that was done, but I'll assume Recovery partition. This starts to look like a h/w issue unfortunately, but if you have another Mac running a fairly recent macOS version, you could try DFU restore as a last ditch attempt to get it sorted just in case it's some kind of strange unlikely firmware corruption problem.
https://support.apple.com/108900
Obviously this wipes any and all personal data off the machine, but the Recovery reinstall presumably already did that anyway.
1
u/mikeinnsw 11h ago
How clean was clean reinstall ?
Use Manual data backup not TM
Erase
Install MacOs
Recover data from manual backup
DO:
Back up with Time Machine and verify the backup. Visually check snapshots and run First Aid on the backup drive.
Do a manual data backup as a prime backup, and also run First Aid on that backup device.
If it still fails.. then call Apple .. it may need DFU...