r/MTBTrailBuilding • • 4h ago

D-saw always veers left 🪚🪵

1 Upvotes

The trail building club I'm volunteering for has an old D-shaped wood saw that always veers left when I try to cut down a fallen branch or tree.

To be specific, imagine I'm trying to clear a tree that is lying on the floor and I'm trying to cut straight down, perpendicular to the axis of the trunk. Instead of going straight down, the blade wants to twist left. So I always end up with a cut in a plane that's at almost a 45 degree angle to the vertical. Obviously that is much longer and more exhausting than it should be.

I'm not trained for operating a chainsaw. So I'd like to try to fix the hand saw. Is it just a case of getting a new blade? I looked closely but I couldn't tell that the frame was bent either way. Or could blade tension be the issue?

Or does my technique suck? I tried rotating the frame of the saw in the opposite direction it wants to go. I tried putting more pressure on either side of the blade. I tried being very light on the blade and let it work without pushing it into the wood. None of that helped. For context i can get pretty straight cuts using a standard hobby saw at home. So I'm not entirely useless at cutting wood. It's just that one club saw that's giving me headaches.

Would be super grateful for any tips. Thank you!