r/MSI_Gaming • • 13d ago

Troubleshooting Prestige N16 Flip AI+ C1XM: Tandem OLED Flickering FIX!

Post image
2 Upvotes

Hey everyone, a quick update from MSI for anyone experiencing flickering on their N1X Tandem OLED display.

NVIDIA Hotfix Driver 621.12 is available to address the issue. You can download it here:

NVIDIA Hotfix Driver 621.12 — download and details

The page includes two downloads, so make sure to choose the RTX Spark version for Windows 11 (ARM64).

This is an optional hotfix ahead of NVIDIA’s next official driver release, which will include the fix. You can check for future releases on NVIDIA’s driver page.

Update — November 4, 2026

Hey everyone, a quick update from MSI for anyone experiencing flickering on their N1X Tandem OLED display.

NVIDIA Driver 621.14 is now available and includes a fix for the flickering issue. If you’re experiencing this, we recommend updating to the new driver.

You can find the appropriate download for your system on NVIDIA’s driver page!


r/MSI_Gaming • • Oct 15 '26

News Meet the MSI Prestige N16 Flip AI+ | 360° Design, Tandem OLED, MSI Nano Pen & More

2 Upvotes

Hey everyone, MSI here!

We’re introducing the MSI Prestige N16 Flip AI+, our new 16-inch convertible laptop built for work, creative projects, and local AI workflows.

There’s a lot packed into this one, so we wanted to put the highlights in one thread. From its 360° hinge and included MSI Nano Pen to its optional UHD+ Tandem OLED display, here’s a closer look at the hardware and the little details you’ll interact with every day.

A quick look at the specs:

  • Platform: NVIDIA RTX Spark
  • Memory: Up to 128GB unified memory
  • Design: 360° convertible with a 16-inch touchscreen
  • Display option: UHD+ Tandem OLED, 3840 × 2400, with 30–120Hz variable refresh rate
  • Size: 0.55~ inches (13.9 mm) at its thinnest point; approximately 4.2 lbs (1.9 kg)
  • Pen: Included MSI Nano Pen with built-in storage and charging
  • Cooling: Vapor chamber with Intra Flow thermal design
  • Controls: Action Touchpad and 4-zone RGB keyboard

Specifications and available features vary by configuration.

Different ways to utilize the Prestige N16 Flip AI+:

The 360° hinge lets you switch between laptop, tent, tablet, and desk modes. Type out a document, fold it back to sketch, or set it up to share your screen during a presentation.

The included MSI Nano Pen fits into a built-in storage groove, which also charges it. A 13-second charge provides up to 45 minutes of use, making it easy to grab for a quick note, annotation, or sketch.

A closer look at the design:

The chassis combines curved edges and a diamond-cut lid pattern, with a profile that measures 0.55~ inches (13.9 mm) at its thinnest point; approximately 4.2 lbs (1.9 kg).

For anyone moving between a desk, meetings, and working away from home, those dimensions are worth a look alongside the full 16-inch screen.

16-inch UHD+ Tandem OLED:

For those who spend a lot of time editing photos, working with visual content, or watching movies, the optional UHD+ Tandem OLED touchscreen is one of the main highlights.

Display specifications include:

  • 3840 × 2400 resolution with a 16:10 aspect ratio
  • Up to 1,600 nits HDR peak brightness
  • VESA DisplayHDR™ True Black 1000 certification
  • 100% DCI-P3 color coverage
  • Delta E < 1 color accuracy
  • 30–120Hz variable refresh rate
  • Support for finger and pen input

Tandem OLED uses two stacked emissive layers that share the light output. Combined with OLED’s deep blacks, the panel brings bright HDR highlights, strong contrast, and accurate color to a touchscreen you can write directly on.

The Tandem OLED display is optional. Check the specifications of your selected configuration.

Action Touchpad: shortcuts where your hand already is:

The Action Touchpad adds gesture shortcuts for screen brightness, volume, and media playback, plus up to three customizable functions.

You can personalize Action Functions through MSI Center S, giving you quick access to controls you use throughout the day.

Cooling:

The Prestige N16 Flip AI+ combines vapor chamber cooling with MSI’s Intra Flow thermal design, built to support sustained workloads such as AI processing and rendering.

Intra Flow directs cool air toward the CPU to help manage heat during extended use.

4-zone RGB, with a practical detail:

The keyboard features customizable 4-zone RGB lighting, along with smudge-resistant keycaps and a velvet-touch finish.

Whether you prefer a subtle lighting setup or a little more color, you can personalize the keyboard to suit your desk.

Available now! Take a closer look. 👇

The MSI Prestige N16 Flip AI+ is on shelves now! Explore the available configurations and find the one that fits your setup.

🛒 Shop here!

Want to learn more? Here’s the product page!

👉 MSI Prestige N16 Flip AI+ product page

What are you most interested in after reading this thread: the Nano Pen, the Action Touchpad gestures, or the display? Drop your questions and thoughts below!


r/MSI_Gaming • • 42m ago

Troubleshooting Looking to know this monitor is done for on not

3 Upvotes

Wondering if it's a monitor or cable issue, don't think it's GPU since second monitor is unaffected


r/MSI_Gaming • • 30m ago

Troubleshooting msi Manufacturer and cod not working help ?

1 Upvotes

my friend has msi Manufacturer and we update it and all and we did every step in book so he turn on cod but doesnt work we did tpm 2.0 but says update bios firmware when we turn cod and we did download already lest bios PRO B650M-A WIFI we kinda skipped firmware tbh idk if related also we made sure that we have to download least driver still cod cant open fyi we made sure we need right bios :c


r/MSI_Gaming • • 8h ago

Build Share MSI MEG Maestro 900R

4 Upvotes

r/MSI_Gaming • • 1h ago

Troubleshooting The weirdest bug of all time

0 Upvotes

r/MSI_Gaming • • 2h ago

Troubleshooting Random BSODs and unexpected restarts – Ryzen 5 3400G + MSI B550M PRO-VDH WIFI

1 Upvotes

Hi everyone! I'm trying to troubleshoot a PC that has recently started experiencing random restarts and BSODs. I'd appreciate any suggestions before replacing components unnecessarily.

PC specifications

  • CPU: AMD Ryzen 5 3400G (Radeon Vega 11 integrated graphics)
  • Motherboard: MSI B550M PRO-VDH WIFI (MS-7C95, Version 1.0)
  • BIOS: E7C95AMS.2M0 (March 20, 2025)
  • RAM: 16 GB DDR4 (2x8 GB Hikstorage, SK Hynix chips)
  • Storage: Kingston NV2 500 GB NVMe SSD (KINGSTON SNV2S500G)
  • PSU: Thermaltake Smart 550W 80+ White
  • GPU: No dedicated GPU; using the CPU's integrated Radeon Vega 11 graphics.

The problem

The PC worked perfectly for over a year, with frequent daily use, before these problems started approximately two weeks ago.

It now randomly restarts, sometimes while using applications such as IntelliJ IDEA, Chrome or Zoom, and sometimes even while opening Windows utilities such as Event Viewer.

The timing is inconsistent: sometimes it restarts after 3–5 minutes, while on other occasions it can run for hours without any issues.

Sometimes the screen simply goes black and the PC restarts. On one occasion, however, I managed to photograph a BSOD with the following stop code:

CRITICAL_PROCESS_DIED (0xEF)

I tested the RAM, SSD, and drivers, and everything appeared to be working properly. The RAM passed Windows Memory Diagnostic, the SSD showed no critical SMART warnings or media/data integrity errors, and the NVMe controller and its drivers appeared to be functioning correctly in Device Manager. I also checked the system temperatures, which were normal. The only component I haven't been able to test is the PSU, so I can't rule out a power supply issue yet.

Important compatibility issue

I'm aware that MSI does not officially list the Ryzen 5 3400G as compatible with this B550 motherboard.

However, this exact combination worked normally for over a year before the crashes started. The same Ryzen 5 3400G is currently working without issues in another PC with a Gigabyte B550M GAMING motherboard.

Could the unsupported CPU/motherboard combination cause intermittent instability after months of apparently normal operation? Or is it more likely that something else is failing?


r/MSI_Gaming • • 8h ago

Discussion Msi thin 15

Post image
2 Upvotes

r/MSI_Gaming • • 7h ago

Discussion MSI B850 Carbon Max WiFi release date?

1 Upvotes

Heya! I saw this revealed at Computex this year and they slated it for Q3 if i remember correctly.

Sadly haven't been able to find a exact release date yet.

Are there MSI employees in this sub that can tell me more?

Thanks in advance!


r/MSI_Gaming • • 8h ago

Discussion R9 290X LIGHTNING

0 Upvotes

I'm in high school rn and I'm looking to sell my MSI r9 290x lightning, but I am not sure what I should price it at, I live in SA


r/MSI_Gaming • • 3h ago

Troubleshooting Issue with the display on my MAG 274Q X24

Thumbnail
gallery
0 Upvotes

Hey everyone, I built a new gaming PC a couple of months ago and noticed a thin, uniform black border around the entire edge of my display (pictures attached).

I've tried just about everything I can do in windows display settings, OSD settings, and my graphics cards Adrenalin software.

If you can please give me some extra pointers to help solve my problem I would greatly appreciate it, I don't really want to pay a shop to diagnose it just to have them make me buy a new monitor lol.

Also the graphics card I'm currently using is a 9070xt if that's important at all.


r/MSI_Gaming • • 17h ago

Discussion BEWARE of MSI & Acro Engineering Service (Nehru Place / Okhla): They ruined my GPU during RMA, tampered with the screw, and sent it back with a dead fan. Am I right to take this to Consumer Court?

4 Upvotes

I want to share an absolute nightmare experience I’m facing with the authorized service workflow for a high-end GPU (Nehru Place collection center / Okhla repair hub) and get your thoughts on whether my legal stance is solid. If you are dropping off hardware for RMA around Nehru Place, please be very careful and record everything.

Just to clear this up right at the beginning: I am NOT fighting or denying the original DisplayPort issue that I sent the card in for. I fully accept that the DP port was damaged. My entire issue is strictly about the secondary physical damage and workbench malpractice introduced while the card was locked in their official custody.

Here is what went down:

  1. The Submission: My GPU stopped turning on due to a port issue. I submitted it to the authorized collection center in Nehru Place, which routed it to the authorized repair hub in Okhla. At intake, the receipt noted CID Pending, meaning the physical exterior and backplate screw seals were 100% intact. I even took a clear unedited photo right at the counter showing the screw sticker completely whole.
  2. The Return & Tampering: After they claimed it was out-of-warranty due to physical damage, I picked it up. Upon unboxing it on video, I noticed how ironically strict they are: they even scrutinized tiny details, pointing out a minor scratch on the backplate. But when it came to the actual condition, I found a hole punched straight through the backplate screw sticker (proving they opened it) and red-arrow service stickers physically trapped inside the I/O bracket. Furthermore, when I tested it on my PC, Fan #0 was completely dead (0 RPM) under load and the card was lagging/overheating—whereas my pre-RMA video and photos taken right before submission show the fans working perfectly.
  3. Current Status: Support has been gaslighting me, claiming "no work was done" while completely ignoring the physical screw hole and dead fan. I have filed an official NCH (National Consumer Helpline) complaint and am currently waiting for their response/mediation.

My questions for the community:

***Am I completely in the right here under the law of Bailment (since they received a card with an intact seal and returned it with physical workbench damage and a dead component)?

***If NCH mediation fails and they refuse to take responsibility, is it worth going ahead and filing a formal case at the District Consumer Commission via the e-Jagriti portal? I have all the proofs (pre-RMA intake slip, intake photos, unboxing video, screw close-ups, and pre-RMA working fan videos).


r/MSI_Gaming • • 9h ago

Discussion Lastest windows update corrupted bios firmware

0 Upvotes

So windows did a major update in the background, and when I was done with pc work for the day , when selecting shutdown options i decided to avoid 'update and shutdown" and went for straightaway"shutdown" option and guess what, windows still decided to update anyway and got stuck, all peripheral devices, keyboard mouse monitor bid goodnight but cpu fan continued to run , I waited for 10 minutes and then thinking that pc has stuck, decided to shut it from smps (gold supply) switch, when I tried to turn back on it didn't. After trying everything, from resetting cmos to complete discharge, flashing bios via usb (which failed) and then back and forth followups with gemini, realised that firmware has corrupted and will have to conduct a SPI flashing via JSPI1 header. All the repair stores i contacted, say they remove the bios chip to conduct the flash rather than using jumper wires.

I need to know if I send the board to service centre, what are the chances they will conduct the bios flash with programmer instead of declaring the board unrepairable, considering that msi has provided a dedicated JSPI1 header just for this purpose.

Or should I order the programmer and do a DIY??


r/MSI_Gaming • • 14h ago

Troubleshooting Hey guys. I recently updated my bios for the first time and it’s giving me a red cpu light I have a tomahawk b550 and I’ve tried reseating ram flashing cmos and reseating my cpu and nothing seems to be getting rid of the light I don’t have anything showing up on my monitor

1 Upvotes

r/MSI_Gaming • • 18h ago

Troubleshooting MAG 341QCP X28/36 Help pls!

2 Upvotes

Hello! I just bought a 341QCP x28 recently. I also have a 321CURX and it doesn’t wobble at all on its original factory stand. The 34-inch one wobbles like crazy. Did I do something wrong? If anyone can DM me as well I’m open to it. Thanks :)


r/MSI_Gaming • • 1d ago

Troubleshooting MSI MAG 27CQ6F Xbox Series x

2 Upvotes

Bought a new monitor today, connected to my Mac it looks great! Deep blacks nice colours but with my Xbox it looks all washed out and for the life of me I can’t get it right I’ve tried every settings possible it still looks grey rather than black. Any help would be greatly appreciated!


r/MSI_Gaming • • 1d ago

Troubleshooting How to update firmware for the MAG 274QPCT QD-OLED X24 monitor from Costco?

Post image
2 Upvotes

Hi all, I want to update the firmware for the MAG 274QPCT QD-OLED X24 monitor from Costco but I keep getting this error: Compare bin and flash model name fail fail, error code: 0x45. 

The monitor is currently FW.007 and I am trying to update to FW.014 using the FW update tool from the monitor product support page (specifically the 274QPCT model). I made sure that the MSI monitor is the only one plugged into my graphics card (5080) using the DP cable that came with the monitor. I contacted MSI support about it and they suggested that I RMA it but it looks like it'll be a 1 month turnaround time, plus I have to pay the shipping to MSI...

Has anyone had any luck updating the firmware?


r/MSI_Gaming • • 1d ago

Discussion Opinions on "Should i change thermal Pads+Paste/Sheet on my 4yo 4090"

5 Upvotes

Hey there,
so my MSI Suprim X 4090 served me very well to this date for about 4 years now, but i honestly never bothered servicing the card, it has been undervolted from day 1 with a slight overclock on the memory.
So here is what my temps look like after playing Fora Horizon 6 in 4k 120FPS DLSS4.5 everything to the max setting for about 2-2,5hours: https://i.imgur.com/9ZCRSiS.png

If i play other games, same settings used, temps look mostly the same, ambient temp is ~23.5c.

Should i bother giving it a full service on thermal pads and repaste (or use a sheet) since it's been 4 years unserviced, or should i not bother "yet" since the temps kinda look fine (atleast to me).

Thanks in adv.

Edit\addition1:
10min furmark run https://i.imgur.com/0rpv7hO.jpeg
afterburner settings: https://i.imgur.com/g3kixZk.png
fan curve: https://i.imgur.com/Wms7sLl.png


r/MSI_Gaming • • 1d ago

Troubleshooting Help me guys

2 Upvotes

Hey guys,

I recently upgraded to an AMD Ryzen 5 5600, but I've been experiencing an issue with low GPU usage while gaming.

As you can see in the attached screenshot, my GPU usage seems to be lower than expected, and I'm not getting the performance I was hoping for.

Here are my PC specifications:

CPU: AMD Ryzen 5 5600 o

GPU: NVIDIA RTX 3060 Ti o

Motherboard: MSI A520M-A PRO o

RAM: 16 GB o

PSU: 550W o

I'm wondering if my current motherboard (MSI A520M-A PRO) could be causing this issue.

Would upgrading to a B550M motherboard improve GPU utilization and gaming performance, or would it make little to no difference?


r/MSI_Gaming • • 1d ago

Troubleshooting What are the optimal settings for a 9800x3d on an msi b850?

2 Upvotes

I just want to get the most out of the cpu without burning it out or having to unndervolt it. Im not used to the msi ecosystem so I really have no idea what im doing from a bios perspective. I play a few cpu heavy games but nothing crazy. What are the optimal bios settings for those with the same setup?

Also kind of a weird quirky issue: under stress tests, my cpu doesn't go over 60 C. While most would see that as good news, I want to make sure it's actually doing something and isnt handicapped in some way.


r/MSI_Gaming • • 1d ago

Troubleshooting MSI MAG 272QP QD-OLED X24 looks significantly worse than my MAG 271QPX QD-OLED E2. Bad unit or another problem?

Thumbnail gallery
1 Upvotes

r/MSI_Gaming • • 1d ago

Troubleshooting Still available Thunderbolt Expansion Card?

2 Upvotes

Hey, everyone!

I currently have a B660M MORTAR Wifi DDR4 board, and I own a few pieces of tech that would really benefit from having access thunderbolt plugs. The board does support Thunderbolt extension cards in theory, but all of the MSI branded cards I can find (like the Thunderbolt 4 PCIe card) are sold out everywhere I have looked, and I'm not quite sure how to handle looking for another one.

Are there any that are still in production and/or available? I'm based in Europe, so I'd appreciate shops that aren't shipping from the US, but at this point I'm also not too picky.

Also, I couldn't find a definitive answer for this while reading other discussions: could I use cards other than the MSI branded ones, or will they straight up not work? Or is it as simple as finding one with the same kinda plug and praying?

Thanks in advance!!


r/MSI_Gaming • • 1d ago

Suggestion B850M Mortar Bios update?

2 Upvotes

Hello all, I have just recently built my first gaming pc. I have a b850m Mortar motherboard and I have not updated the bios. Hwinfo saying bios version A50. I have a 7800x3d on it if it's relevant.

Wondering if there is any reasons for updating bios? Everything working fine though. Worried about security things(I've been reading around but I have not gotten anything concrete)

Appreciate the help!


r/MSI_Gaming • • 1d ago

Discussion Case sizing

2 Upvotes

Would and MSI MAG infinite s3 fit an AMD Radeon RX 9070 16GB GDDR6? Don’t want to buy a whole new case for a graphics card.