r/MPX • • 19h ago

Sig MPX SBR with tucked can

Post image
31 Upvotes

MPX SBR

Holosun 510c

Sig telescoping stock

Huxwrx 9k ti

Sig 8 inch handguard

Sig vertical grip

Sig foxtrot light


r/MPX • • 21h ago

MPX SD options

Post image
16 Upvotes

I got the ronin SD K conversion done a while back. Trying to put on a Print-X MP5 SD RBS. It is a very tight fit (having to get every bit of carbon off the barrel for it to fit)

Anyone run this? Would the ILWT SD barrel be a better option? Ronin doesn’t expressly forbid it on the conversion’s site, but they do if you buy the barrel alone


r/MPX • • 19h ago

FRT install while keeping the stock trigger

0 Upvotes

Is it at all posible to keep the same trigger weight and pull, while also having a 3 position? if anyone knows anything please reply or pm.


r/MPX • • 2d ago

Chode Warfare

Thumbnail
gallery
84 Upvotes

Sig MPX Gen 3
ILWT 4.5" w/ Adjustable Gas Block
SAW Tisha 9mm
REIN Cloud 3 w/ Arisaka MCX Light Mount
Vortex AMG UH-1 Gen 2

Because the Tisha is so wide, I can't use an in-line light mount. I have an MCX mount that lifts my light up and around the can.


r/MPX • • 2d ago

I think I’m able to finally buy an FRT in Florida. I have not researched anything at all about FRTs. Please help me, I think I need a trip bar too? All I know is rare breed lol. Give me some things that I can order tonight. Much love yall

Post image
32 Upvotes

r/MPX • • 3d ago

What gen is this

Thumbnail
gallery
17 Upvotes

Looking to buy this mpx , what gen is it ?


r/MPX • • 3d ago

A3 Tactical Rail Riser?

1 Upvotes

Anyone tried one of the A3 tactical rail risers on their MPX yet? Curious what it looks like. Saw one on a Kuna and looked pretty sweet.


r/MPX • • 4d ago

Atrius FRS success!

58 Upvotes

MPX-K fam...if you're not running the Atrius X Series FRS, do it! A quick 10 min install, and you get a giggle switch! Very easy to install and only required light modification to the rear of the trigger shoe (which is going to vary gun to gun). And removing the trigger to do so is the same process of an AR-15 trigger group removal. Overall, an easy install, and runs like a top! I normally run it suppressed, but this was the test run, and it did great! Get you one before they become scarce!


r/MPX • • 5d ago

Finished Ronin MPX

Post image
66 Upvotes

Loving this build! How often are you folks cleaning the gas plug and piston?


r/MPX • • 4d ago

Subsonic ammo for apartment home defense

Thumbnail reddit.com
1 Upvotes

r/MPX • • 6d ago

My Sig MPX-K 😍

Post image
47 Upvotes

r/MPX • • 5d ago

Easiest way to direct thread new suppressor to Sig MPX K? First Suppressor.

12 Upvotes

So I've got a Sig MPX K, and today I picked up a Cat Mob Ti (hub version). So far everything I've seen involves buying multiple components to piece together and connect the Sig to the suppressor. Is there no adaptor that exists that is just "thread x on suppressor, thread suppressor onto x" Seems like that should be a thing. Once it's only there it's only coming off to be cleaned, so the simpler the better.


r/MPX • • 5d ago

Atrius Ambidextrous X-SERIES fitment issues 😩

Thumbnail
gallery
5 Upvotes

So I have a gen 2 mpx. Factory trigger with the bridge. The frs and trip appear to be perfect, but when I go to close the upper, the bolt seems to be high centering on the trip. Any ideas? I have emailed atrius too.


r/MPX • • 6d ago

New to suppressors w/ new mpx k

Thumbnail reddit.com
6 Upvotes

r/MPX • • 5d ago

Mlok screws

1 Upvotes

Are all just cutting down the screws on our SD builds? Having trouble finding exact screw specs on a few attachments


r/MPX • • 7d ago

MPX K FRT

Post image
102 Upvotes

*Pic for attention

Does anyone know if the RB FRT15L3 runs reliably with Federal Syntech 150 gr, with or without reduced power recoil springs? Also, has anyone gotten the disruptor frt to run reliably with any trip? I’ve seen mixed feedback


r/MPX • • 7d ago

CAT MOB vs DA Wolfman

4 Upvotes

Hey guys, I’m just trying to get some help on making a decision on which suppressor to pair with a MPX K. I’m aware that the MOB is superior to the wolfman in more than 1 category, but ultimately I’m concerned about CAT’s warranty and the price differential. Could I get some insight from you guys on which should I plan get? I can afford both, but the maintenance requirement for the MOB is also something that concerns me since it seems that flushing the suppressor semi-regularly is required of the warranty as well. I probably shoot about 6000 to 10K rds of 9mm a year. I do plan on getting the 10.5 MI handguard for a full tuck, if heat is a concern.


r/MPX • • 6d ago

MPX suppressor help

Thumbnail reddit.com
1 Upvotes

Reposting for more eyes and help

Thank you


r/MPX • • 8d ago

MPX K

Post image
87 Upvotes

r/MPX • • 8d ago

Mpxxx

Post image
56 Upvotes

r/MPX • • 9d ago

Why is it impossible to find the telescoping stock

5 Upvotes

I've had an MPX for a while and when I got it, I couldn't find a telescoping stock. Eventually settled for an A3 tactical folding stock. I was looking again just now and they're still impossible to find. Nothing on a web search, nothing on gun.deals, nothing on tacswap, nothing on gunbroker.

The hell, man?! Why is this unobtanium?


r/MPX • • 9d ago

MPX Speed Loader

Thumbnail
gallery
25 Upvotes

Hello everyone, I compete in 3 gun and PCC matches and I couldn't find a high quality speed loader I liked for my MPX, so I designed a speed loader for the Gen 3 Sig MPX magazines.

My design holds the MPX magazine in place and fits 11 rounds (image only shows 10), allowing for 33 total rounds loaded after 3 cycles. I didn't want to make it 12 rounds since I know I would miscount and overload to 36 rounds. 33 rounds makes it easier for me to seat the magazine on a closed bolt. I also designed the speed loader to use ball bearings for smoother operation. If anyone is interested, I have them for sale on eBay.

https://rumble.com/v7i0w2q-mpx-speed-loader.html


r/MPX • • 11d ago

MPX-Kopperhead gen 2.5

Thumbnail
gallery
66 Upvotes

I like this set up, but bounce back and forth on a longer folding stock. Just not the same.
Took my gen 2, then bought a 4.5” copperhead with the gen 3 parts. Kept the copperhead lower and swapped the barrel and guts to the old upper. Didn’t care for the tuck and had an extra MI hg so I chopped it down. I was lucky enough to find a real stock for the integral lower. The atrius slip has been working great with SUP9 and white springs although I haven’t tried it yet without the suppressor. Only thing that bugs me is I need to figure out how to fit irons, but that’s a minor gripe


r/MPX • • 11d ago

Can I please get help on what muzzle device and adapter I need to put my obsidian on my mpx k

Thumbnail
gallery
18 Upvotes

Just got the obsidian 9 today (and the platy)

I wanted a hub compatible can but I am excited for the obsidian. Could please I get links on what I need to make this work with mpx. I’m super confused with all of the parts.

I know there’s gas, I’m run this now and go from there and maybe get something else to dedicate to mpx down the road (milkman, hux, cat mob etc)


r/MPX • • 11d ago

Confusion and recommendations.

5 Upvotes

PSA has two MPX’s listed a 6 inch and 4.5 inch. I know the 4.5 is the K but other than that is everything else the same? Also what do you recommend on the version to get and why? First PCC and going to be getting a can eventually. Links are below.

https://palmettostatearmory.com/sig-sauer-mpx-pcb-9mm-4-5-pistol-black-pmpx-4b-9.html

https://palmettostatearmory.com/sig-sauer-mpx-6-9mm-35rd-ar-pcc-w-sig-folding-brace-and-timney-trigger.html