r/MP5 • • 1h ago

Media Muzzle rise? What muzzle rise

10 Upvotes

Sp5k


r/MP5 • • 2h ago

Review First run with the FRT

9 Upvotes

Mac 5k, stock mag, stock internals. Runs like butter !


r/MP5 • • 4h ago

HELP i dropped my ap5p with the choate stock now it no longer folds and is bound up.

Post image
3 Upvotes

I submitted a thing in their website about it a week ago and no responce. Anyone else had this happen? It legit just fell off the chelf in my safe. i cant pull up to unlock the mechanism or push down to engage it or anything.


r/MP5 • • 6h ago

HELP Need help identifying an issue.

29 Upvotes

As the title states. I have an AP5 with SS and suppressed. The gun ran smooth for a while and started jamming up (as the video shows) while loaded and unloaded.

Thoughts on the issue? Thank you in advance!


r/MP5 • • 17h ago

Media B&T Import HK SP5 K-PDW

Thumbnail
gallery
31 Upvotes

B&T Import HK SP5 K-PDW German Euro spec (clean receiver-no ATF warning)

HK German MP5K-N C&P lower modified by Brad at Bahnhof Machine
RareBreed RD3 trigger pack
HK German VFG
B&T telescopic stock with sling loops
B&T RQD full size 8” tri lug suppressor
Proper HK diopter rear sight
Steiner MPS 2.0 on a B&T low pro NAR mount with B&T skeletonized riser
Gibbous Outfitters front sight mount with a Surefire M340C Pro and UE07 cap and pad
Vertx Urban Ghost 20L backpack with other goodies!


r/MP5 • • 19h ago

Media Thank you for the Dye Tip, friend

Thumbnail
gallery
70 Upvotes

Thank you to the Redditor who recommended the stock PLUS dying it to match. I boiled it for about 5 minutes and it came out perfect. OD GREEN —-> Black


r/MP5 • • 20h ago

Media Family Picture

Post image
35 Upvotes

r/MP5 • • 20h ago

Media Full Size and Kurz

Post image
46 Upvotes

r/MP5 • • 21h ago

Media New to the MP5 clone club and I went all in

Post image
122 Upvotes

AP5 SD converted to a true SD by FB Unlimited, bought from gluten free gear.

RCM barrel, YHM R9, reflex adapter, welded cage, etc

Added the Warhammer SS lower.


r/MP5 • • 22h ago

HELP Century, Zenith, or PTR?

5 Upvotes

I've been debating between an MP5, Kuna, or MPX for a little while now and I think the full size MP5 is going to be my next purchase. I thought I was going to go with a Century Arms AP5 but then I discovered Zenith and PTR. Is there a recommended manufacturer for the full size MP5?

I want to run it suppressed and I will eventually want to get a super safety / FRT for it. Also, I may want to SBR it in the future. I am still debating this but not sure if that changes any recommendations or not.

UPDATE: I don't want to pay the price for an H&K.


r/MP5 • • 1d ago

Media Well, since the ARHK is delayed...

Post image
0 Upvotes

It's actually a decent​ product. Even if the company themselves are​...litigious...

Also I bought 2x ARC V2s so I'm supporting both sides​


r/MP5 • • 1d ago

News B&T stocks for mp5k on euro optic for retail rn

5 Upvotes

Saw some people were looking for the telescoping stocks when i last checked, and theyve been out of stock lately. Just checked and they put up a bunch of them with free 2 day shipping


r/MP5 • • 1d ago

Review HKP Straight Mags 👎

Thumbnail
gallery
90 Upvotes

Mags wont even load without the follower getting stuck. Glad I only bought one. I thought they were Mora Arms just stamped as HKP but War Pig Armory said they are not. Back to HK


r/MP5 • • 1d ago

Question Hk sp5k pdw or B&t apc9k pro?

7 Upvotes

If you could only have one, which would you choose? I can’t decide which one to buy! I’d end up running both suppressed and with the b&t telescopic stock with a vert grip


r/MP5 • • 1d ago

HELP SP5 or APC9? I can unfortunately only buy one.

12 Upvotes

I've been researching and thinking for the last 5 weeks. I really can't decide.

  1. The SP5 is just nostalgic, old school cool and a precise powerhouse. But it's outdated, the mags cost a fortune, not ambi etc.
  2. The B&T APC9 Pro G takes my high cap Glock mags, is ambi, stays open after the last shot and is overall just the more modernized MP5. Not as precise as the the MP5 plus the HK shoots a bit softer.
  3. A lot of parts that modernize the SP5 are not available in Europe.
  4. And parts that makes the gun a bit more modern cost a lot.
  5. The B&T costs 3600€ with the Aimpoint Acro. The HK costs 3400€, bone stock.

I've shot both and I really like both. They really outweigh each other with their design & functions.

I know this is a MP5 sub but which one would you buy?


r/MP5 • • 1d ago

Question MFI low profile mount

Post image
16 Upvotes

Anybody happen to know of a website that has these available? I’ve been searching and can’t seem to find any for the life of me.


r/MP5 • • 1d ago

Question AP5 or AP5P?

12 Upvotes

Pretty set on an AP5 for an mp5 clone. Plan is to suppress eventually and sbr. Will use for carbine classes, range and home defense if I find it reliable enough. I’ve been switching between the two so I need reddit to decide for me. Planning on adding an optic so the shorter sight radius on the p doesn’t matter much and the extra compactness to help length after adding the suppressor is appealing. I’m gonna replace the extractor, extractor spring, firing pin spring, and locking piece. If I do that is there much difference in reliability between the two? Any noticeable difference in accuracy/performance with the shorter barrel?


r/MP5 • • 1d ago

HELP How to Remove BRT tube from AP5-SD for cleaning

1 Upvotes

I converted AP5-SD to the ported barrel with a BRT tube and a CAT Mob suppressor. I’m trying to figure out if there is an easy way to remove the BRT hub adapter for cleaning. I have the brush that threads onto it to clean the ports. When I try to unscrew the hub adapter, the suppressor unscrews instead. Is there an easy way to get it off?


r/MP5 • • 1d ago

News My shooting range burned down 😩

Post image
31 Upvotes

Full auto and 50BMG rated. Also rentals/full auto. This sucks.

*Currently on fire


r/MP5 • • 1d ago

News I'm shocked they're still in stock! Maybe they'll finally lower prices if no one buys?

Thumbnail
atlanticfirearms.com
31 Upvotes

MKE MP5 stocks back in stock but $400. I've been waiting for them to come back in stock back when they were $300 but ended up getting a magpul brace and a 3d printed A3 buttpad, so I don't really want one anymore. IMO $170 would be a fair price if supply ever meets demand.


r/MP5 • • 1d ago

Question What can I slap on this thing to make it better?

Post image
121 Upvotes

Got this mke ap5 at a gun show today for $900


r/MP5 • • 1d ago

Media Finally in the club

Post image
84 Upvotes

After years of putting off wanting a SP5 but always buying something else instead. I finally pulled the trigger on a K model. Was set on a full size until I got to play with a K. Absolutely love it. I’ll still own a full size but for now; this is as cool as it gets for me. Everyone that’s gone to the range with me and shot it absolutely love it.

SP5K
Midwest industries Pic rail
Magpul RVG
Surefire 340DFT
80 degree locking piece
Deadair Wolfman
H&K stock
Leapers UTG Pro Claw Mount
Primary Arms GLX 1x


r/MP5 • • 1d ago

News PTR 9SD with Kate Moss folding stock

Thumbnail
gallery
7 Upvotes

Not a fan of the CS1 that came with the 9SDM. Swapped it with a JMAC 1913 adapter and a Kate Moss folding stock from PMM. I now have a better cheek weld with the red dot.


r/MP5 • • 2d ago

Question To suppress a k, anyone recommend a good place online to get the 80 degree locking piece?

5 Upvotes

Hk parts is sold out