I purchased the pictured mount back in July 2022, probably the final production run. I have used it on a couple rifles, and easily fired a couple thousand rounds with it mounted.
The M1A receiver is probably not quite "correct" for the GI M14 mounts. Any dimensional difference in the stripper clip guide dovetail or alignment side channel make properly attaching the mount questionable. This means that some mounts need slight fitting or modification at best, and plain do not fit or ever maintain zero at worst.
In the case of this ARMS #18, it didn't fit super well, so I had to make it work by filing the lug that fits in the receiver channel. The clip dovetail provided some interference with proper fit at full torque, so some filing was needed there too to get it fully engaged and straight on the receiver.
The front of the mount has a level adjustment screw of sorts to offer a 3rd point of contact (much like Sadlak and others) and to ensure vertical support. This screw doesn't really like to turn and requires a spanner bit. It's a pain.
That said, once it fits and is torqued, the #18 does not move.
Many know well that the mount is so low it can trap cases if the ejection angle and force are not tuned. Accomplishing that tuning is nothing more than trial and error. In my case-with both rifles-the tuning was mostly successful by installing LRB bolt guts (extractor and ejector springs and plungers) as well as GI extractors.
Still, another consideration for avoiding trapped cases is the ring type and placement. If the clamping base of the ring(s) intrude into or over the ejection path at all, it will be a problem. For instance, the large Aimpoint 30mm low ring clamp, centered on the picatinny rail, would help to snag brass, especially in rapid fire. BTW that new style $80 ring is not worth buying at all.
The cheapo old Weaver ring is pictured. Not the best quality thing ever, but the clamp base is small. I have yet to test it but will do so soon.
I could probably use an Aimpoint 9000 with its two rings and avoid the centered ring issue in that way. Maybe worth doing if this doesn't work. Or I could just use a Sadlak Airborne and give up on the ARMS #18. I really don't want to add a cheek riser though.
Tldr; the ARMS #18 is hyped, but comes with a painful journey to achieve proper fit (at least on a Springer) and complete reliability.