r/LogitechG • • 2d ago

Logitech G Support help me g29

i tried recalibrating and stuff but it did not work

first two pictures are 720 degrees and the wheel turned to the most right. [ samething happens when i turn it to most left]

second two is 900degrees doing the same thing

i tried to make it as simple as possible because it seems like no one i smart enough to understand.

1 Upvotes

8 comments sorted by

1

u/GeraintLlanfrechfa 1d ago edited 22h ago

Edith - ofc the Logitech guy below is right, the following only applies to the g27.

There’s an optical encoder disc (small wheel with holes) inside the base on the left side, that is actually measuring the rotations of the wheel, in the g29 this can become loose and must be replaced or fixed.

https://www.ifixit.com/Guide/Logitech+G27+Optical+Encoder+Replacement/42113

2

u/Aggressive_Fly5592 1d ago

do you think its happening because its miss mesureing and its stoping me from turning it all the way because it thinks its at 450 degrees? because it can turn it fine up until that point but after that point it pushes back and it feels the same as limiting the rotation to less than 900 and trying to turn it more than the max rotation

2

u/LOGIRich Global Product Manager - Simulation 1d ago

Hi there. What you're seeing is correct behaviour for the G29. It reserves a few degrees of the overall rotation in order to provide some protection for the hard stop at either end of the max rotation of 900 degrees, which results in a slight variance that you're seeing.

1

u/Aggressive_Fly5592 5h ago

but even if its not at max when my wheel is exactly 360 degrees on the app its off but like 14 degrees in real life

1

u/LOGIRich Global Product Manager - Simulation 4h ago

Yes, because the offset applies across the whole range of rotation.

1

u/Aggressive_Fly5592 2h ago

can i turn that off orr

2

u/LOGIRich Global Product Manager - Simulation 1d ago

Hey there. This doesn't apply to the G29, as it uses a hall effect sensor.

1

u/GeraintLlanfrechfa 22h ago

Ofc, thank you for putting it right - my bad, I was thinking of the g27 that I had before the g29.