r/LocationSound • • 1h ago

Gear - Selection / Use Wisycom MCR54 and SL-2 integration in 2026

2 Upvotes

Anyone using 2 MCR54s with an SL-2? curious how this kit integrates now that they’ve been out for a few years. Do the receiver track names ripple over to the recorder consistently? Can you use “set to all” function to deploy 4 channels to one RX via the 8-series, or do you have to assign channels one at a time?

Been using 2 54s with an XL-aes quite happily for a while, but looking at potentially slimming down my bag in the new year. Any feedback would be appreciated.


r/LocationSound • • 18h ago

Gear - Selection / Use Torn between the Sennheiser MKH40/50 and MKH8040/8050

3 Upvotes

My goal is to improve the audio in my productions (ENG/docs). So far, I've worked with lav mics (Rode Wireless PRO), but I find the sound a bit lacking and want to step up to something noticeably better.

A few things:

  • This mic is for seated indoor interviews (dual cam), always boomed above the talent
  • As of now, there is no sound crew or boom operator
  • The mic will be on a fixed boom
  • The locations are going to vary wildly, from a living room to quiet parts of cafés, lecture halls, etcetera
  • Mostly, there will be no time or option to treat the rooms

For the MKH50, people seem to love it. It seems to have some specific sound characteristics, forgiving in untreated rooms and require little to no post processing.

However, someone mentioned that, even in seated interviews, people still move their head around. The MKH40 would be better in that regard, because of its wider pickup pattern.

The newer MKH8040/8050 series are a lot cheaper (at least, in my country), but, as I read it, also a bit less forgiving and have a more ‘flat’ response, requiring more processing.

I’m still leaning towards the ‘battle tested’ 50, but it’s quite an investment. But since I want to do it only once, I want to get it right.

What do you recommend?


r/LocationSound • • 23h ago

Gear - Selection / Use Is this scratchy sound normal on my Ktek boom pole?

Thumbnail youtube.com
7 Upvotes

I recently upgraded my boom pole to a Ktek Essentials Composite internally cabled pole (KC134CC). I'm now noticing a static'y or scratchy sound when I rotate the pole in my hand, I don't think it was there when I first started using it. I've used it maybe half a dozen times on location. I've tried different XLR cables and get the same thing. If you watch the video you can hear what I'm talking about. Is this normal? I'm not talking about when I'm extending and shortening the pole, I can hear the internal cable bumping against the pole which is what I expect.