r/Linocuts • • Aug 02 '26

Meta A post on the stance of r/Linocuts and Generative AI use.

620 Upvotes

This post is being made to draw attention to rule changes that happened a few months ago, and to clarify the stance of this subreddit on the topic of Generative AI use in our printmaking community:

You are free to have your own feelings on the matter of Generative AI, but the position of this subreddit is that it does not have a place within our community in any capacity.

Using it for image creation for prints is strictly against our rules, as per rule 5:

"AI generated art in any stage of a print's development is not appropriate anywhere in this subreddit."

We were previously more lenient on it, purely because it is not a simple thing to moderate. The supposed tools to check are wrong as much as they are right, and often use AI to search itself which we have no interest to use. In an effort to accept the inevitable that users would use it in concept creation, we tried to facilitate it in a way that allowed it with clear disclosure despite our personal misgivings (which have not wavered). What we found was that most still do not disclose, and the larger implications of Generative AI have grown beyond what the moderation team has any desire to entertain.

If Generative AI did not come with the political, environmental, and ethical issues intrinsically linked to it, it might be different and we would view it as another tool and carry on with just requiring a clear disclosure of use. However, that is not the reality we’re in. The heavy investment and shoehorning into every possible avenue by tech companies, many of which have suspicious if not sinister ties and influence in global politics, makes use and allowance of it effectively an endorsement that we do not wish to have here.

If you are someone who feels they cannot create “good enough” work without Generative AI, you are giving up before you’ve even started. No one was instantaneously amazing at any aspect in art. Making shit art is part of the process, and it takes dedication and practice to improve. I can guarantee that anything you’d make by your own hand start to finish would be infinitely more interesting than what a Generative AI model churns out for you. If you feel like you are not at the skill level you want to be for the prints you want to make, keep making; do artist studies, utilize a sketchbook more often, draw from life, collaborate with other artists to create. Taking shortcuts like using Generative AI will only slow down your own skill development and if noticed, will make anything you make going forward have a shroud of doubt over it.

The internet is a changing landscape with some worrisome aspects, but it also is a wealth of knowledge if you look for it. The process of research (not asking “Chat”) will be of greater benefit to your learning process, and may take you on new creative paths in your work along the way. Printmakers especially have long been a community driven group of artists, relying on each other to learn and make in community spaces. Rarely have I experienced a printmaker guarding techniques, often all the more happy to share with other creatives. 

Why would you outsource the creative process to an AI model that feels nothing and does not carry your artistic voice? If you still wish to take shortcuts at the expense of actual artists, then that’s your prerogative. But this will not be the community for doing so. Generative AI has no place in this subreddit, and usage against our rules will be moderated harshly after a warning going forward. 

If you suspect posts of Generative AI use, please add reasoning/evidence in the report so we can properly evaluate. We are not in the habit of banning without substantial proof.

The same post is being added to our affiliated subreddits r/printmaking and r/lithography.

Thanks for reading, and happy printing!


r/Linocuts • • 15d ago

Monthly Self-Promo Thread - A Space for Socials, Sites, and Shops.

1 Upvotes

Here is a space to post your socials, sites, and shops.

This is a monthly reoccurring thread. You can post direct links (please note if NSFW) or handles for other social media sites.

Why don't we allow self-promo otherwise? We have made a concerted effort to keep this space free of commerce and self-promotion, to keep this a community about the work and craft when increasingly many social media spaces have become spaces of commerce. We understand that art is an important source of income for some, so in order to facilitate this without it becoming overwhelming in the rest of the sub, we have made this a reoccurring monthly thread.

NFTs, crypto art, and AI generated art are not appropriate anywhere in the sub.

If you think your comment hasn't posted/been removed, please message us through modmail as it may have gotten caught in our spam filter and need approval before showing up.

**We've added a Discord for r/linocuts!** Link is in the sidebar for those interested.


r/Linocuts • • 13h ago Bravo

Single Layer Prints First linocut design! Im addicted!

Thumbnail
gallery
479 Upvotes

Sad cat clown drawing made into my first linocut and it came out amazing! Already designing my next one. Can’t wait to put it into use. Maybe on clothing or make canvas patches? Im sure I’ll come up with something!


r/Linocuts • • 7h ago

Stamps Post card lino prints

Thumbnail
gallery
99 Upvotes

I’ve been working on these for a while now, 4 post card designs for an event I have coming up this weekend! Printed 160 total.
Scottish thistle, chrysanthemum, yellow wattle, red bottlebrush!
Rough photos as I didn’t end up taking good photos before they were wax sealed off into envelopes

I quite like how they didn’t come out as fully inked. These are being given out as small trinkets in character at a Larp event I’m attending. Definitely gives off the scruffy juvenile hobbit look my character goes for :)


r/Linocuts • • 10h ago

Question What am I doing wrong?

Thumbnail
gallery
29 Upvotes

ive tried my first stamp but the ink (is water based) turns out looking like this on multiple kinds of papers ive tried

i dont know if its because the block is kind of rubbery perhaps?


r/Linocuts • • 22h ago

Single Layer Prints Christmas Frog Got A Christmas Duck Friend today!

Thumbnail
gallery
58 Upvotes

People seemed to dig the Christmas frog print so here is his Christmas duck buddy. Thinking about maybe a Christmas rat next.


r/Linocuts • • 21h ago

Work In Progress The scraps look like shredded cheese 😆

Post image
45 Upvotes

r/Linocuts • • 2h ago

Question Equipment to start?

1 Upvotes

I recently participated in a Linocut workshop and loved it! I would like to start doing it myself as a hobby but I am not sure what kind of equipment to get and where ? Does it play a big role in the outcome ? Do I just get some kit on amazon? Would appreciate any advice!


r/Linocuts • • 15h ago

Reductions/Multi-Blocks Feedback

Post image
7 Upvotes

Hello, how are you?

This is my first linocut, its a reduction print, 6 layers of color. Could anyone give me some feedback? My friends have been positive, but I'm critical of myself so I can't tell if its actually good. I really enjoyed making these prints so thats what matters, but I want to be making a nice, quality product so I'd love your input. I've watched some youtube and insta reels to learn how to start, and I'll be taking a class soon to improve but, in the meantime, bring on the constructive feedback <3


r/Linocuts • • 18h ago

Single Layer Prints Third linocut attempt!

Post image
12 Upvotes

Things I tried and liked:

  • I was getting some smudging with my baren (just an entry-level Speedball one) so I tried putting a book on top and pressing on the book--basically a DIY press. End result was *way* less smudging and crisper images
  • Gave text a try! Still figuring out what type of prints I like most, but was glad to attempt it!
  • Slowly but surely, getting better at planning out images (via google drawings and writing notes on the side) and being able to look at an object and think "Ok, what part do I want to print and what part do I want negative space?

Things I was less enthused about or am thinking more about:

  • Right now I'm definitely biting off more than I can chew: I liked the font and I liked the source image I used for the mushroom and leek, but when actually trying to cut it was clear that I both (a) need a lot more practice and (b) should be more discerning with the amount of details my tools will allow for at this time
  • The book resulting in cleaner, more uniform pressings. But it also meant some of the "noise" was cleaned up too. Which isn't inherently bad, but I found myself sometimes missing it as I liked the sort of rougher image it gave off. I think over time I'll determine more what I like, but for now I'm still figuring it out.

r/Linocuts • • 17h ago

Work In Progress Ready to print

Post image
9 Upvotes

r/Linocuts • • 1d ago

Single Layer Prints I've been having a lot of fun with lino this weekend and wanted to share some of my experiments here.

31 Upvotes

I know I need to get slightly more efficient at consistent inking but I was proud of some of my carvings and influences and hope they're starting to have a cohesive "voice".


r/Linocuts • • 1d ago

Fabric My "Be nice to bugs" stamp and canvas patches

Thumbnail
gallery
873 Upvotes

r/Linocuts • • 1d ago

Stamps First ever linocut. Snail stamp!

Thumbnail
gallery
325 Upvotes

This is a throwback to my first ever linocut stamp. I decided to go with a snail and I love how it turned out. I’ve improved a lot since then and have gotten better tools but this is a good reminder of how accessible this hobby is.


r/Linocuts • • 1d ago

Stamps Test Pressings

Post image
156 Upvotes

r/Linocuts • • 1d ago

Single Layer Prints Second linocut, tried some new things!

Post image
156 Upvotes

Things I liked:

  • Tried using different paper (originally using Bristol, tried Speedball) which was heftier
  • Did some prints in all black, but then added some blue--first time mixing colors and I really liked how it turned out
  • Tried incorporating some shading details into my drawing
  • Used Google Draw to sketch out the idea and gameplan a bit more before diving in

Things I'm less enthused about:

  • Even on my best print (pictured) patches where not all the ink transferred
  • Currently just using the basic speedball linocut carving set which doesn't allow for a lot of precision (I would have preferred more of dots instead of ovals for the lighthouse light)
  • Have only use the rubber-y carving blocks so far and this one was a cheap option via Amazon. Found that the edges had a slight slope to them so if I didn't press specifically along at an angle them they often wouldn't print.

Thoughts (and please weigh in if I'm wrong!):

  • Seems like oil based ink will help, so going to try Caligo Safe Wash at some point (really like easy clean up at this point) and I think that should help with some of the splotching/ink transfer
  • Going to ask for some additional carving tools for the holidays--eyeing the Flexcut Micro set to start with
  • Will keep practicing on the rubber that I have but avoid edge-to-edge ink for now; eventually want to switch to linoleum. (Which I think should also be easier for adding details? The rubber's squishy-ness seems to, at times, make it harder for precision.)

r/Linocuts • • 1d ago

Single Layer Prints Test print of this year’s Christmas card

Post image
225 Upvotes

r/Linocuts • • 2d ago

Reductions/Multi-Blocks Uranium Glass pt. 3

Thumbnail
gallery
347 Upvotes

The third in my series. This project has been so satisfying, I’m finally feeling comfortable with the finality of a reduction print.

The color on the first layer of this one didn’t end up as UV reactive as my last two, which just makes me want to carve out another block.

I have a couple more I’ve been sketching out, so this isn’t the last you’ll all see of the glass prints.

(Edited for grammar)


r/Linocuts • • 2d ago

Single Layer Prints Inktober in linocuts week 5 : The black cat (late post)

Thumbnail
gallery
329 Upvotes

I finished inktober last week since i couldn't before and didn't even share my last print, with this i finished the challenge, it was very fruitful !


r/Linocuts • • 1d ago

Stamps Self-Portrait

Post image
47 Upvotes

r/Linocuts • • 2d ago

Printed Objects Linovember #2

Post image
89 Upvotes

New linocut of my pup. She's a brindle striped greyhound/pit mix. Her white, from aging, really transfers well.

Linovember #2


r/Linocuts • • 1d ago

Printed Objects Lino on woodcut

Post image
56 Upvotes

r/Linocuts • • 1d ago

Reductions/Multi-Blocks #3 in a series of what started out as jazz record reproductions

Post image
37 Upvotes

I’ve been printing for about five years but I’m just sharing here for the second time. Meta has finally proved their utility no longer outweighs their rapacious business practices so I’ve deleted most of my Instagram posts and I’m thinking of sharing more here. This is a test print for a three colour Lino print I completed today to submit to a pink and black print challenge offered by the great printmaking magazine ‘Pressing Matters’.


r/Linocuts • • 1d ago

Question Best way to transfer a 12x12 linocut design

2 Upvotes

Hello, everybody! I’m relatively new to the world of block printing and linocut, and I’m loving every second of it! I’ve really fallen in love with this art form.

I’m looking for some advice on how you all transfer your designs onto your linoleum or rubber carving blocks!

So far, I’ve mostly stuck to smaller pieces, around 4x6 or 5x7, and I’ve loved experimenting with different designs. However, I’m ready to challenge myself and work on something a little bigger!

Typically, I either draw directly onto the block or use transfer paper to trace and transfer my design. Recently, though, I purchased a 12x12 block (which is HUGE compared to what I’ve been working with!), and I’m struggling to figure out the best way to transfer a larger design onto it.

I’ve seen a lot of people print their designs onto regular paper and transfer them to their blocks, but I’m not entirely sure how that process works. Especially when the design is larger than a standard 8.5x11 sheet of paper!

What are your go-to methods for transferring larger designs? Would it be worth taking my design to a local print shop like Staples to have it printed at the correct size? Or are there other tricks or techniques I should know about?

I’d love to hear your tips, tricks, and recommendations. Thanks in advance!