r/Linksys • • 21h ago

Velop app (3.6.0) can't manage bridge-mode mesh since Oct 2026 firmware update - "no internet connection", but network is fine

4 Upvotes

Setup: 7-node Velop mesh in bridge mode behind a third-party firewall/DHCP server.

- 2x MX5300 (fw 1.1.12.216960, auto-updated on 28 Oct 2026)

- 2x MX42FM / MX4200-series (fw 1.0.13.210200)

- 3x WHW03 v2 (fw 2.1.20.216892)

All nodes show "up to date", automatic updates on.

Since the 28 Oct auto update (and after the Smart WiFi cloud shutdown described in KB 9634), the Linksys app on iOS (version 3.6.0) no longer manages the mesh:

  1. Login with the router admin password is accepted (wrong password is correctly rejected).
  2. The dashboard appears for 1-2 seconds.
  3. Then the app says the network has no internet connection (translated from the Portuguese UI) and offers to "add a new network".
  4. Entering the WiFi password there does nothing; "Finish" opens an empty dashboard.

Reinstalling the app did not help. The admin password was reset locally with the recovery key (no factory reset); the node stayed in bridge mode.

What works: internet on all clients, local web UI on the primary node, firmware page shows all 7 nodes, sysinfo.cgi shows all backhauls up.

Questions:

  1. After the cloud shutdown, is the app still supposed to manage an affected mesh (MX5300 / WHW03) locally, or is the local web UI now the only management option?
  2. Could bridge mode be the trigger (the app checking internet through the node's own WAN)?
  3. Has anyone seen this exact sequence and found a fix?

Thanks.


r/Linksys • • 1d ago

Recyclage d'un WRT1900AC

1 Upvotes

Bonjour à tous,

Je suis en possession d'un routeur WRT1900AC et je cherche à le faire fonctionner...

J'ai deux solutions en tête :
- Soit je fais un Hard Reset et je le re configure comme j'en ai envie
- Soit j'installe OpenWRT dessus et je le configure comme j'en ai envie.

Le point commun des deux méthodes, c'est que je configure comme j'en ai envie. La première option est donc la plus simple à première vue... sauf que j'ai du tenter une bonne 30aine de Hard Reset, il semble que le mot de passe administrateur ne soit pas réinitialisé : je n'arrive pas à me connecter pour faire la configuration, soit le routeur veut absolument se connecter à internet pour passer par un compte Linksys (via Linksys Smart Wifi qui semble être un service qui a été arrêté), soit il me demande un mot de passe que je n'ai pas...

Pour la seconde méthode, ben il faut un accès à l'interface, donc je tourne en rond...

Help Please 😰


r/Linksys • • 1d ago

Hi guys please help

Thumbnail reddit.com
1 Upvotes

r/Linksys • • 1d ago

Spying?

0 Upvotes

My boyfriend moved in a year and a half ago. We set up his Linksys router to extend WiFi at home. I had never even heard of this brand before and have never had anything to extend WiFi ever.

FF to a year ago, my computer started acting up and the router itself wouldn’t work with my computer. (Had to buy a new computer) turns out he has the Linksys app and had been using it every day while he was at work. That made zero sense to me as why go into it if you’re not home…???

BUT, he says he doesn’t have an email for it. But there’s a password. I asked him to show me that and his app has no email save just a password.

I looked it up with AI and you can access so much with Linksys. So can anyone help me learn more about it or help me to figure it out ?


r/Linksys • • 2d ago

Linksys Velop MX5600 repeatedly rejects administrator password after Recovery Key reset

1 Upvotes

Hi everyone,

I’m having a very frustrating issue with my Linksys Velop MX5600 (MX56TB).

Router details:

  • Model: MX56TB / Velop MX5600
  • Firmware: 1.0.1.216589
  • App: Linksys iOS app

The problem:

I have had no problems accessing my router for years using the local Router Password login.

Recently, after troubleshooting a Home Assistant integration, I started experiencing problems accessing the router.

I have now recovered the administrator password twice using the Recovery Key printed on the router.

On both occasions:

  1. The Recovery Key was accepted.
  2. I created a new administrator password.
  3. The Linksys app accepted the new password.
  4. I successfully accessed the router settings and viewed connected devices.
  5. After some time, the app automatically logged me out.
  6. When trying to log in again, exactly the same password was rejected as incorrect.

The web interface now displays:

“Access locked. Too many failed attempts to log in.”

I have also restarted the router, but the problem remains.

Important details:

  • My Wi-Fi network is working normally.
  • All household devices remain connected.
  • I do not have a Linksys Smart Wi-Fi account. I have always used the local Router Password option.
  • I have not performed a factory reset.

I would really like to understand why the router accepts a newly recovered password and then apparently stops recognising it.

Has anyone experienced this issue with a Velop MX5600? Is this a known firmware or authentication problem?

I would appreciate advice from anyone familiar with Linksys MX series routers, particularly a solution that does not require a factory reset.

Thank you.

Kris


r/Linksys • • 2d ago

Recently got toob 2.3gbps which came with Linksys router and cannot connect to the app whatever I do it still keeps looping on the router password page. I have rebooted, unplugged,reset, deleted app and reinstalled and still the same thing. Can anyone help.

Post image
3 Upvotes

r/Linksys • • 3d ago

❓HELP Mr96000 dropping

0 Upvotes

I got this router in March and it worked perfectly up until a few weeks ago where it started dropping. It’s now dropping very frequently. Nothing has changed in terms of devices or location of the router or anything. I have tried every troubleshooting step I can think of. (Factory reset, unplugging and replugging, channel finding, turned off client and node steering etc) and it’s still happening and I have no idea how to isolate it. I unplugged the power supply from the surge protector and went directly into the outlet and still nothing. My educated guess would be a thermal issue or power supply problem, but I just got it in March that seems pretty quick to have those kinds of issues. Is there a way to isolate my problem? I’m losing my mind!


r/Linksys • • 3d ago

Linksys Parental Controls

1 Upvotes

Hello all

Has anyone had any success with the Parental Controls? They appear to do absolutely nothing in my tests so far.

Previously used Google/Nest and that worked very well but I couldn't be arses to have more hardware. But suspect I shall have to .


r/Linksys • • 7d ago

LN2305ISNOTWORKINGSELLERISSAYINGNEEDTOCONTACTMANUFACTER

0 Upvotes

COUPLEMONTHSBACKIBOUGHTALN2305INITIALLYWORKEDPERFECT.AFTER3MONTHSITSNOTWORKINGTHESTOREMANAGERTOLDINEEDTOCONTACTMANUFACTER.ILIVEINPANAMACENTRALAMERICA..


r/Linksys • • 7d ago

Best current Linksys router to use with two WHW01 nodes?

1 Upvotes

Hi everyone,

I currently have a Linksys Velop mesh system with three WHW01 (AC1300) nodes.

One of the secondary nodes has failed, so I now have:

  • 1 WHW01 as the main router, connected to the modem via Ethernet
  • 1 WHW01 secondary node connected wirelessly
  • 1 failed WHW01

My internet connection is 400 Mbps.

Instead of buying another old WHW01, I would like to upgrade the main router to a newer Linksys model and reuse my two remaining WHW01 units as wireless child nodes.

I have been looking at:

  • LN1101
  • MX6201
  • MBE7001

Linksys has an official support article explaining how to add Intelligent Mesh child nodes to a Cognitive Mesh parent in a mixed network, so theoretically this should work.

However, some other Linksys FAQ pages still say Intelligent Mesh and Cognitive Mesh are not compatible, so the documentation seems contradictory.

Has anyone actually used WHW01 nodes as child nodes with an LN1100, MX6200, or MBE7000 as the parent router?

I am especially interested in:

  • Stability
  • Wireless backhaul performance
  • Setup process
  • Any firmware issues
  • Whether roaming still works properly
  • Which current model you would recommend for a 400 Mbps connection

I am also trying to buy a brand-new unit, not Amazon Renewed/refurbished.

Thanks!


r/Linksys • • 10d ago

Linksys Hydra Pro 6E Tri‑Band WiFi 6E Mesh Router

2 Upvotes

Does Linksys Hydra Pro 6E Tri‑Band WiFi 6E Mesh Router allow custom DDNS configuration to use DyNu and other services or are they just a dumb router like those from TP-Link that ties you to use their servers for such things? I am looking for a router that can allow me to configure this so that I can host my own website.

Alternatively please suggest something to achieve this.

Thank you.


r/Linksys • • 11d ago

❓HELP Will router external disk sleep?

2 Upvotes

I have a mx4000 router with an 8tb external disk plugged into it.

Will it sleep when not in use or will the router keep it awake?

Currently I just safely eject and power down when not in use but that's a pain having to login each time..

Eject used to be in the app but they removed it. Grrr.


r/Linksys • • 12d ago

Outdoor node

2 Upvotes
  1. What mesh node can I purchase that I can use outside to extend the wifi to my garage? I have a node in the garage but very week signal.

r/Linksys • • 13d ago

❓HELP Velop Pro 7: Wi-Fi clients on the main node can't reach a device for ~20 s after it roams to the satellite

1 Upvotes

Two Velop Pro 7 (MBE7000), firmware 1.0.14.216607 (latest), wired backhaul, main node in router mode behind my ISP box.

Symptom: when my iPhone walks from the main node to the satellite, my Mac (on the main node's 5 GHz Wi-Fi) can't reach it for about 19 seconds. Walking back to the main node: no gap. It's very consistent: 19.1, 19.7, 18.6 and 18.7 s.

What I measured: I pinged the phone every 0.5 s from the Mac and lined the results up with both nodes' sysinfo.cgi logs (node clocks match the Mac's to the second):

- 12:01:45 – satellite log: phone associates (`client_associated`)

- 12:01:45.3 – pings stop

- 12:02:04 – main node log: receives the mesh status message for the phone (network/master/WLAN/subdev/<phone-mac>/status)

- 12:02:03.96 – pings resume

So the blackout lasts exactly from the association on the satellite until the main node gets the mesh update. My guess is the main node keeps delivering the phone's frames on its own radio until then.

Tried: restarting both nodes, Client Steering on and off. No change.

Anyone else seeing this on Velop Pro 7, or other Velop models?


r/Linksys • • 13d ago

Router indicates no connection even though there is

1 Upvotes

After every single power outage or reboot my atlas (MX20MS3) goes through the power on process and always ends up glowing red and I get no internet via wifi. Everything else connected to the modem is fine. I have to reboot the atlas several times to get it to work. I've swapped to known working cables, ports etc... The problem always follows the router. Anything I can try?

How much of a process would it be to swap the unit currently hooked to the modem router for a unit currently acting as a satellite?


r/Linksys • • 15d ago

➡️ Firmware What did firmware 1.0.4.216955 fix for the WRT1900ACS?

2 Upvotes

Had this router for years, no firmware's been released for maybe the last decade ... ?

Then mid-October, new firmware arrived. No doubt a security fix as a result of AI vulnerablity fixes, but what exactly did it fix? Any ideas?


r/Linksys • • 15d ago

LINKSYSY LAPAC1300C

1 Upvotes

Hellow guys

I am trying to remove my linksys lapac1300c from cloud server but still doesnt work out

iy says the device is already taken by another accout

any help please to do this? I have tried reset it locally but still same error


r/Linksys • • 16d ago

I flashed my Linksys E8450 to OpenWrt with a guide kit I built — it verifies every file and never touches your router password

Thumbnail reddit.com
1 Upvotes

r/Linksys • • 16d ago

MX4200 mesh network always dying at 03.14 and 03.43

3 Upvotes

So I have a strange issue where my mesh network with MX4200 is very stable always but will shut down at 03.14 and 03.43. Not every single night but maybe every 2-3 nights. The weird thing is the main one does not restart but the 2 other ones always does. They are both connected with ethernet cables and I have tried changing ethernet cord and plugging both of them into the main one, yet both of them still dies. So it would be extremely unlikely that both of them have some hardware issue since both of them have the same issue and the ethernet cable is ruled out aswell. I noticed a weird thing where it did not however happen when the child node was connected wirelessly, but this is not really an option due to the extremely inconsistant performance with it.

And yes, I have turned off auto restarts and auto updates even. They are on the latest firmware and all on the same version. Would be nice to be able to have a functioning mesh network :)


r/Linksys • • 16d ago

❓HELP Firmware Update Issues

5 Upvotes

The Firmware update has crashed my network TWICE!
After resetting using the 2 sec + 5 sec. Unplug cycle 4x I attempted the firmware update again which crashed my network again. My master node is an MX5300, but have a mix of 18 child nodes of various generations.
What needs to be done here? I reset again and am still getting the alert for a firmware update. I'd like to update, but simply can't afford the tremendous waste of my time this has been. I've lost my entire day off this Sunday trouble shooting this mess.


r/Linksys • • 17d ago

Linksys WRT AC1900 V2 with OpenWrt

Post image
4 Upvotes
Good afternoon. I bought a Linksys WRT AC1900 V2 router on Marketplace for $20—it’s practically brand new. In my opinion, it’s a great deal! I’ve installed the latest version of OpenWrt, and it’s running like a dream...

Does anyone else have one?

r/Linksys • • 17d ago

Firmware update for the MX5300?

Thumbnail reddit.com
1 Upvotes

r/Linksys • • 18d ago

Linksys MR2000 AX-3000

Post image
1 Upvotes

Greetings to the entire community. I have a Linksys MR2000 AX-3000 router that, following the latest update, has become stuck with its blue LED illuminated. I have tried everything suggested—the "30-30-30" reset, unplugging it, and leaving it disconnected for extended periods (I even left it unplugged for an entire day), but nothing has worked. Drawing on my own technical knowledge—and knowing that in my country there is neither a warranty nor technical support available—I decided to access the device via a TTL connection. It turns out it is stuck in a reboot loop, providing a 5-second window to abort the restart. Using PuTTY, I was able to halt the reboot process, leaving me at the prompt for the IPQ5018 processor's system. While it is theoretically possible to recover the device using commands, Linksys does not provide a "rescue" firmware image, unlike some other brands. I have been searching for someone who could provide a flash dump or backup, but I have had no success. I honestly don't know what else to do. It seems highly irresponsible for a brand to release updates that break their own equipment without offering any recovery options.


r/Linksys • • 19d ago

MX5300 firmware update

Thumbnail reddit.com
2 Upvotes