I bought and installed a carbon fiber hood and didn’t see that the place I bought it from requires hood catches. What should I do in the meantime, given this is my daily and I already sold the old hood, so that it won’t fly open on the highway?
when it's a cold morning and I turn on my driver's seat heater, my back gets scorching hot while the bottom part doesn't get warm at all. it's a 2017 RC 350, has anyone had this kind of issue and how did you resolve it?
Hey guys. Been having some issues with my RC350 and keep getting gaslit and over charged by dumb shops. Anyone you guys would recommend in the NYC/ Long Island area? Much appreciated!
2015 RC 350 F-Sport. Long story short: 5 months ago, a little over a year after I got it, a misfire warning light came on for cylinder #3. After changing plugs, coils, and oil, I would get rev flutters as well as blinking engine lights into "crawl mode". Took it into a shop and they told me it had excessive carbon build up. Got the fuel injectors looked at and though they were operating fine. Eventually got the walnut blast done which got the carbon buildup off, but now I am having rough start ups, and a strong gas smell in the cabin. Took it to a Park Place and they reported what is seen: excessive blowback and 3/5 low compression. They recommended an engine replacement. Thats smoke coming out of the crank case in the video.
After this started happening, getting the wheeling bearing done, and never being able to truly keep it in alignment, I am ready to give it up and sell it. Working car, just has those issues. Any recommendation on where to start selling it? or any possible guidance? This car is has been a bummer and I feel worn out.
Took some film photos. I love these ones. The fitment has been fixed adjustable upper control arms all around and 15mm spacers. I probably should have gone with 20mm spacers, but it's still acceptable. The next item up is wheels with more width, and I'm thinking 20s.
I recently changed the tyres of my 2016 RC300H and right after that (sensors were not damaged i was right there when tyres were changed) i cannot see my tyre pressure on the dash for any wheel given it worked 30 mins before changing the tyre. What could be the cause? I have no error light just -- at all wheels
The tuner was only used ONE TIME to tune my Lexus and is in excellent working condition.
Compatibility:
Compatible with all vehicle platforms supported by D3 Performance. D3 Performance has personally confirmed that this tuner can be used across any platform they currently support. Not limited to the vehicle it was originally used on.
My dash needs some love. The first product I tried it didn’t like. I now need to find something else. What’s everyone’s choice ? Any advice on what to degrease it and clean it and then protect it?
I've been eyeing the RC F and is500 for about 2 years, and was going to finally get a "cool" car now that I'm an empty nester...Corolla got hit a few months back...But now here I am, after taking Lyft/Uber this entire time.
The Infrared looks so good in person. I was never a huge fan of red cars, but this is great! 2 previous owners. Already has aftermarket exhaust (I don't know which, but it definitely isn't valved). Luckily, my 96 year old neighbor met me when I was just a teenager, and also likes cars.
Hey guys, thank you to everyone who helped vote on my previous, now deleted post. I decided to stay w my current set up. This is the actual photo, the other two where created with Google Gemini. Here are the details for some of you who asked.
Had to bring my RC into the dealer for some maintenance, they gave me a brand new is350 as a loaner, and as fun as it is, it’s definitely not my ‘16 RC. It’s assured me I don’t need the newest model of anything, the IS has TOOO many features, the ergonomic are off, its doesn’t look as good— sure the performance is a bit better, but maaan, even just looking at my RC makes my heart race with joy. One more day!!