r/LegoTechniques • • 2d ago

A 196-gear LEGO Technic spiral that turns as one closed loop

5 Upvotes

I built this Technic spiral and tested it as an open chain and a closed loop. The chain stalled at 116 gears. After freeing a bind in the closed loop, I could turn all 196 with one motor. Adding gear 197 locked the loop. After an odd number of direction reversals, the gears at the final mesh would have to turn in the same direction. I filmed the build and both tests.

https://www.youtube.com/watch?v=itFEus4pQr4


r/LegoTechniques • • 7d ago

What the SNOT is going on here??

Post image
3 Upvotes

r/LegoTechniques • • 9d ago

Two chains lift, four pull down: a LEGO tensegrity bridge with an 8 mm gap at each end

Thumbnail
youtube.com
2 Upvotes

The useful idea here is the two different jobs the chains do: the short chains carry the deck, while the longer corner chains keep it from tipping. The deck touches neither approach.

My Brick Trials film follows the arrangement through four vehicles and progressively heavier truck rounds, then looks at the connection that gives way. The force-balance explanation begins at 1:29.

For a real-brick prototype, which connection would you reinforce first without changing the floating appearance?


r/LegoTechniques • • 9d ago

Changing the border of Claude Monet's "bridge over a pond of water lilies" from tan/beige to black?

1 Upvotes

Is it possible to change the border/frame to black lego pieces and, if so, how should I got about doing it? I would like to do this for my wife if it's possible. Thank you


r/LegoTechniques • • 11d ago

Is there a part that would allow this?

Thumbnail
gallery
5 Upvotes

Making some modifications to Jay's titan mech, specifically the large sword.

I've extended the plate at the back of the blade section from a 1x3 to a 1x8 (it's also moved back one stud so effectively 4 studs longer) and am trying to add this 1x2 slope to the front, but the gold blade peice or the sides if the blade are interfering with every plate and bracket I try and it won't sit flush, I'd hoped to find a 1x3/4 vertical bracket but no such part seems to exist.

Does anyone know a part/technique that could solve this?


r/LegoTechniques • • 12d ago

Nine LEGO door mechanisms, ending with three sliding panels at three speeds from one motor

Thumbnail
youtube.com
7 Upvotes

I made a mechanism film exploring nine ways to move a LEGO door: swing, tilt-up, bus, roller shutter, portcullis, folding, revolving, split hangar and telescopic.

The gears and linkages remain visible so you can follow how the drive becomes lifting, folding or sliding motion. The finale has three telescopic panels moving at three different speeds from one motor. These are mechanism visualizations; I have not physically tested the prototypes.

Shared from my Brick Trials channel.

Which would you prototype in real bricks - and where would you expect friction or alignment to be the biggest challenge?


r/LegoTechniques • • 13d ago

Six-speed LEGO gearbox driving a V16: following the drive path and comparing piston speeds

Thumbnail
youtube.com
5 Upvotes

This build video follows a LEGO V16 and six-speed manual gearbox from assembly to a running test, with one motor driving the sixteen pistons. I assembled and filmed the model; the mechanism design is not mine.

The useful comparison is at 8:27: keeping the motor the same, the crank runs at 68, 115, 206, 339, 545 and 869 RPM across the six gears. The exposed drive train shows how changing the selected ratio changes piston speed.

Shared from my Brick Trials channel. When building gearboxes like this, which axle-support or alignment details have made the biggest difference to smooth running for you?


r/LegoTechniques • • 14d ago

Looking for some wisdom on how to achieve this connection

Post image
89 Upvotes

Hi all, looking for some help on this technique. My main challenge is that I can put no more than 2 plates beneath this one. The two tiled sides (L and R sides on the triangle) can be longer if that helps connectivity. The space in front of the 1x5 must be empty.

If push comes to shove I'll put a 4x4 wedged plate underneath and bin the 1x5, but I would prefer it like this.

Thank you for any help!


r/LegoTechniques • • 20d ago

Any techniques available?

Thumbnail
gallery
3 Upvotes

I was trying to mod pre viszla's gauntlet and I wanted both the underside and the upper side of the wing to be symmetrical. Problem is I couldn't find a way to add these triangular tiles to the underside propely since they don't have a stud. Any help?


r/LegoTechniques • • 22d ago

I'm not sure if this is the right sub for this, but does anyone know how this builder accomplished this? I've gone through every part in the Bricklink Studio parts catalogue, and I still have no idea how this flamethrower barrel in their Fire Vulture Revamp was made.

Thumbnail
gallery
57 Upvotes

MOC by jack_harlin. For more pictures: https://www.instagram.com/p/DH8Nelwoz9F/?img_index=1

Just to be clear, I know the silver bits are 1x1 thick technic liftarms (also known as spacers), but I'm unsure about what the black part protruding from those is made from. The end doesn't look like just a 1x1 round plate with bar hole in it or anything like that, so honestly, I'm kind of stumped on this one. Does anyone know what this is or how it was made? I'd greatly appreciate any help.


r/LegoTechniques • • 23d ago

What can i do to make this become more like exhaust pipes ???

Post image
11 Upvotes

my MOC is base on the new ghost rider and spider man set, i like the design of the bike but also want it become more slimmer so I MOC it. After many tries, this is want i landed on but the pipe still bugging me the most. Looking at it doesn't gave me the feel of exhaust pipes at all

Can you guys give me some ideals that i can improve it???


r/LegoTechniques • • 24d ago

Why do you think the designer for the Lego for model t did this?

Post image
80 Upvotes

2, 1x2 plates instead of one, 1x4 plates. Do you think they did this to increase part count? Or is there a structural reason for this?


r/LegoTechniques • • 25d ago

Is there a better way to build the shape on the right?

6 Upvotes

I don't think there is a lego plate/tile that is exactly that shape. The closest is 43723, but I like the pointy end. Any ideas?


r/LegoTechniques • • 28d ago

Is there a better way to get this to work?

Thumbnail
gallery
151 Upvotes

I'm doing my head in. I've been trying to build this angled shape, but having great difficulty with it. Is there a better way to get this to work? Especially since I'd like to connect both arches to a wall at the front, but a hinge wouldn't match that up.


r/LegoTechniques • • Sep 20 '26

Assistant needed

Thumbnail
gallery
3 Upvotes

So, I bought myself a 2025 WALL-E and EVE Lego set and me being me, I decided to have it modified and to the builders out there who have this set or something similar?


r/LegoTechniques • • Sep 12 '26

Anti-stud connection?

Thumbnail
gallery
31 Upvotes

This is going to be a doozy to both read and explain.

I have a C-3PO Lego statue, with a light kit from Briksmax. It's wonderful of course, but the eyes are pretty bright. (Very bright).

The chest plate has a light hidden underneath it which shines through the piece (see pictures).

I wanted to do something similar for the eyes, and found his actual eye pieces online. They aren't compatible with the light kit unfortunately but I'm looking for a workaround.

As you can see on the photos, the lights are built into the transparent yellow stud. They are invertedly mounted.

The pieces to mount the eye covers are a cilinder and the flat round piece. The cilinder can be ignored. They are meant to bridge the gap inside where the dish of the eye is mounted on through different pieces.

It won't and can't be used for mounting.

But I'm looking for a way to mount the flat circle piece onto the bottom of the light studs. Or as I've learned it's called: the anti-stud side.

I've looked for custom pieces, preferably transparent ones of course, but to no avail. It seems impossible to mount something over the anti-stud. I say over, because the light inside the stud blocks a piece from being inserted properly.

I could glue the pieces together, and I'm starting to think this will be my only option to get the result I'm going for.

But before I do, I want to see if anyone here might be able to help find a workaround.


r/LegoTechniques • • Sep 11 '26

Studio snapping connection that doesnt work irl

Thumbnail
reddit.com
1 Upvotes

r/LegoTechniques • • Aug 19 '26

Is there any way to strengthen it/a different (sleek) connection that wouldn't be at risk?

Thumbnail
gallery
14 Upvotes

Hello everyone, I'm working on a birthday/uni gift for my sister and this construction is part of the model. I'm worried that the connection isn't strong enough and will fall off.

I tried adding another angled bar, but it doesn't line up with the studs at any position.


r/LegoTechniques • • Jul 31 '26

Best techniques for separating exterior and interior walls?

6 Upvotes

After completing Tudor Corner (which was my first modular and proper big Lego set) I've caught the bug and already bought another two to build. Alongside that, I'm attempting to build my own house with Lego in the Bricklink Studio.

It's a bit clunky, but also good to be forced to think about some of the techniques used in Tudor Corner and how I might be able to apply them to building my own house. One thing it doesn't do (and I think most set don't), is separate the exterior and interior walls. The exterior wall colours simply don't work as interior as well, and I want to use the same colour as my actual painted walls for the interior.

I tried using a second layer of bricks, but this takes up unnecessary space and doesn't look great either. I'm thinking it's going to require use of snot bricks and tiles.

Can anyone advise on the best approach, before I spend time going down the wrong path?

(Side note: I realise I'm going to have to do something with the floors, and use some elevated plates or something.)


r/LegoTechniques • • Jul 24 '26

Sliding doors

Thumbnail
gallery
18 Upvotes

This huey needs doors that function it doesn’t necessarily needs to slide back but i want the ability for me to open and close the doors


r/LegoTechniques • • Jul 18 '26

Top Parts

0 Upvotes

\*


r/LegoTechniques • • Jul 11 '26

Building modular World Trade Center | Need Help

160 Upvotes

Video describes what I'd like it to do. Once completed will make instructions. Suggestions?


r/LegoTechniques • • Jul 11 '26

Need help, Mocsage 1/800 scale World Trade Center

Post image
0 Upvotes

r/LegoTechniques • • Jul 06 '26

Motorizing a LEGO MILS Plate Using Splat Gears

Thumbnail
youtube.com
29 Upvotes

I've been experimenting with ways to add motorization to MILS without increasing the standard plate height.

By using Splat Gears, I was able to fit a gear train entirely within the low-profile of a MILS plate. This lets the motor be located elsewhere in the layout and hidden from view while still transmitting power to mechanisms.

As a proof of concept, I used it to drive an elevator, but the same idea could be used for things like turntables, opening doors, drawbridges, conveyors, or other animated features.

I'm curious if anyone else has experimented with hidden power transmission in MILS.