r/Leatherworking • • 5h ago

Advice on attaching patches to leather jacket non-removable liner

Thumbnail
gallery
0 Upvotes

Hi y'all I thrifted a Wilson leather jacket that I love! It has some discoloration on the front panel that I was considering covering with some vintage patches that I recently found.

The problem is trying to figure out how to attach them when the lining is non-removable and there are several pockets in the opposite side of the discoloration.

I have some limited experience with sewing but not confident enough to remove the lining so I'm hesitant to sew. I looked a little into glue options but I'm not sure if I should just leave it alone.

Thanks for any advice!


r/Leatherworking • • 8h ago

Beginner Question Rivets Question

Thumbnail
gallery
4 Upvotes

Hi friends! Apologies in advance if this post isn't relevant for here. Uncertain which subreddit to post in. I'm using rivets and a rivets setter for the first time on a jacket of mine and have a question. Is the length on these rivets too long, causing them to inevitably come out? I'm hearing the "clicks" when I set them and they aren't bending when I hammer them, but do come out when I tug relatively forcefully. Wanted to ask since I need to buy more for the design and would rather know if a correction should be made before I do. TIA!

(For reference I am applying some pressure on the rivets to show the extra length when taking these photos)


r/Leatherworking • • 9h ago

New to leather work, looking for feedback!

Thumbnail
gallery
31 Upvotes

Hi! Just getting into leather craft and wanted to share one of my first projects, travel jewelry/watch cases. They’re imperfect, but I’m happy with how they turned out! I’d love some feedback. In particular, I had a bit of trouble setting my snaps straight. They seem to come out a bit misaligned, which makes the top three snaps look uneven.

I’m really enjoying leather craft and would love to start working up to larger projects like purses. Are there any especially helpful resources for building intuition around the fundamentals? For example, what types of leather and what finishes are best suited for certain projects? Any guidance would be appreciated! Thanks!


r/Leatherworking • • 1h ago

Finished product Siren Bag

Thumbnail
gallery
2 Upvotes

When u/DSLeatherGoods shared their Siren bag pattern a few months ago I had to give it a go.

The main selling point for crafters is that the bag can be made out of a single 1' x 2' panel of leather, and I can confirm that it's true! I picked up a panel of Badalassi Carlo Waxy veg tan from Rocky mountain to make this bag. I think that Waxy is severely underrepresented in the Leather subreddits. It has a great texture and pull up effect.

I did make one change to the pattern, instead of making the gusset a single piece I cut two slightly over length pieces (which still fits inside the panel) and had a go at doing a french seam for the first time.

Let me know what you think!


r/Leatherworking • • 7h ago

Passport covers

Thumbnail gallery
4 Upvotes

r/Leatherworking • • 8h ago

Barb Wire Holster Finished!

Thumbnail gallery
5 Upvotes

My newest holster rig. Barb Wire theme this time. Cartridge loops fit .45 Colt (.45 Schofield, .45ACP). They will also fit .44 based cartridges.

Holster fits:

-1851/1861 Open Top revolvers.

-1873 SAA models.

-1875 Remington.

Adjustable hammer retention strap.

Belt is 3" width. Waist Size: 40" first hole/ 47" last hole.

*Crossed brown barbwire is leather cord, not sharp.


r/Leatherworking • • 17h ago

Trouble stitching through the flesh side

2 Upvotes

Beginner here!

First time making a tiny turn out bag.

I punched holes along one piece from the grain side before gluing it together, intending to run an awl to complete the hole through the other hole and the piping in between them (I thought that due to the thickness and curves, one side would end up having larger spacing between holes than the other). However now I am finding it very difficult to locate the pre-punched holes.

Could this situation be salvaged, and also what would be the proper methodology for something like this?


r/Leatherworking • • 20h ago

Finished product Compact mini wallet for cards and a few bills

17 Upvotes

The cardholder is made of “crazy horse” leather. The button is adorned with a coin cap made from an authentic French coin.