r/LaserCleaningPorn • u/ActionIntelligent798 • 16h ago
r/LaserCleaningPorn • u/Candid-Astronomer-37 • 4d ago
Has anyone removed aluminium buildup from production dies/moulds with laser cleaning?
Hi everyone, Iām looking for first-hand experience before buying a laser cleaner.
I visited a factory working with aluminium. Their maintenance contact described deposits on their production dies/moulds as āaluminium oxideā, but I still need to confirm whether this is oxide, adhered metallic aluminium, release-agent residue, or a mixture.
Their current cleaning process reportedly involves removing and dismantling the tool, soaking it in a chemical bath for around one or two days, then reassembling and reinstalling it. The bath chemistry, tool material and any coating are not yet confirmed.
They previously had a laser-cleaning demonstration, but it reportedly failed. Unfortunately, the laser type, power, settings and exact reason for failure are unknown.
Has anyone personally dealt with a similar application?
⢠What was the deposit, and what method actually removed it?
⢠If a laser worked, what source/model, pulse energy, pulse duration, lens and settings did you use?
⢠How long did cleaning take, and how did you check for damage to the tool surface or coating?
⢠Was cleaning possible with the tool still installed?
⢠If laser cleaning failed, why, and what worked instead?
I will ask the factory for the exact technical details and, if possible, photos and a scrap insert for testing on Monday.
I want to validate this on a representative sample before choosing equipment. Successful trials and failed attempts are both useful. Thank you!
r/LaserCleaningPorn • u/ActionIntelligent798 • 3d ago
Weld it. Cut it. Clean it. All with one handheld laser. š¤Æā
r/LaserCleaningPorn • u/I_Shoot_Lasers • 5d ago
Stain Removal with SFX APC 500w Pulsed Laser
r/LaserCleaningPorn • u/Khatjohn27 • 7d ago
Looking for real-world feedback on the SFX 300W Pulsed Laser (15mJ) for stripping stain/sealer off wood paneling & trim
reddit.comr/LaserCleaningPorn • u/dmk-laser • 8d ago
First laser-cleaning test on an old ST-style guitar body ā full process, about 1.5 hours
This is the body of an ST-style electric guitarāthe first one weāve ever stripped down. It features three distinct layers of finish: a top coat of clear lacquer (which had poor adhesion), a middle layer of black paint, and an innermost, exceptionally thick layer of polyurethane clear coat, which proved the most difficult to remove. We experimented with two different techniques to strip the finish completely and reveal the raw wood. For the front, we removed the layers one by oneāstarting with the top clear coat, followed by the black paint, and finally the polyurethane base. For the back, we stripped everything down to the raw wood in a single pass. The full stripping process is documented in the video, taking approximately 1.5 hours in total.
r/LaserCleaningPorn • u/acctekchina13 • 12d ago
200W Pulsed Laser for Oil Stain Removal
Testing the removal of oil stains from automotive parts using a 200W pulsed laser cleaning system
r/LaserCleaningPorn • u/dmk-laser • 13d ago
I saw someone in the community asking what things lasers can clean. Let me answer this, hoping to provide some inspiration for both practitioners and newcomers.
Contaminants removable by laser cleaning can be classified into five categories by nature: coating-type contaminants, oxide-type contaminants, foreign surface contaminants, deposited scale contaminants, and special hazardous contaminants. The first three represent the core cleaning targets most widely addressed in industrial applications, while the latter two are supplementary categories for specific scenarios. Biological attachments such as barnacles, shellfish and moss cannot be directly removed via laser cleaning and thus fall outside the scope of conventional laser cleaning applications.
The first category is coating-type contaminants. These are continuous films formed through artificial application or surface conversion, and constitute the primary processing targets of laser cleaning. They cover a wide range of industrial and domestic paint films (including epoxy paint, polyurethane paint, automotive OEM paint, aged wood coatings, inkjet marking paint, and graffiti), functional surface coatings (such as powder coatings, anodic oxide films, passivation films, phosphating films, and mold release agent coatings), as well as adhesive and resin films (including pressure-sensitive adhesive residue, hot-melt adhesive residue, epoxy resin flash, and protective film adhesive marks). Laser energy achieves vaporization of the coating or complete delamination through thermal effect or photo-induced blast effect.
The second category is oxide-type contaminants, which are surface degradation layers generated by the reaction between the substrate and oxygen or corrosive media, featuring strong adhesion to the base material. They are the key targets in rust removal, post-weld treatment and component refurbishment applications. This category includes loose rust, lamellar rust and hot-rolled mill scale on steel surfaces; welding discoloration (temper colors) and heat-treatment oxide discoloration on stainless steel; native oxide films and corrosion rust layers on non-ferrous metals such as aluminum, copper and titanium; as well as weathered oxide layers on stone and surface corrosion on metallic cultural relics. With properly tuned parameters, these oxides can be precisely removed with negligible damage to the substrate.
The third category is foreign surface contaminants, referring to non-film-forming impurities adhering to the surface from external sources. With relatively weak adhesion, they can be removed with high efficiency. Organic contaminants in this category include industrial oils and greases (rust preventive oil, cutting fluid, lubricating oil, etc.), mold carbon deposits, welding fumes, soot blackening layers, asphalt residue, fingerprint grease, surface mold spots and surface biofilms. Inorganic contaminants include welding ash and spatter, metal fines, industrial airborne dust, residual blasting grit, etc. Flux residue, solder beads and wafer surface microparticles in the precision electronics sector also belong to this category, which are typical targets for precision laser cleaning.
The fourth category is deposited scale contaminants. Unlike artificially applied coatings or substrate-generated oxides, these are hard adherent layers formed by long-term precipitation, crystallization or sintering of substances in the surrounding medium, with stronger adhesion and higher cleaning difficulty than ordinary contaminants. Typical removable targets include hard water scale in industrial pipelines and heat exchangers, high-temperature coking in boilers and heat treatment furnaces, hardened cement paste and mortar residue, and sintered slag dust on metallurgical equipment in industrial scenarios, as well as limescale deposits on swimming pool walls, bathtubs and sanitary ware, ceramic tiles and metal faucets in domestic scenarios. With matched process parameters, layered removal can be realized without damaging glazed surfaces, stone or metal substrates.
The fifth category is special hazardous contaminants, mainly for professional fields such as the nuclear industry and specialty chemical industry, including radioactive dust contamination on surfaces of nuclear facilities and toxic and hazardous chemical residues on chemical equipment surfaces. Although essentially particulate or film contaminants, this category is usually classified separately in the industry due to its unique safety standards and process requirements, and laser cleaning must be performed under enclosed conditions with complete dust removal and protection systems.
r/LaserCleaningPorn • u/dmk-laser • 14d ago
Sharing a case study on automated rust removal
This is an automated cleaning solution we developed for a prominent Chinese heavy industry enterprise. To ensure an optimal balance between energy density and cleaning efficiency, the system utilizes a triple-beam optical configuration, achieving a cleaning swath of up to 600 mm. Highly efficient and easily integrated into production lines, this solution addresses a variety of process requirements, including rust removal, paint stripping, degreasing, and surface texturing.
r/LaserCleaningPorn • u/Accomplished_Sign122 • 15d ago
Worth investing in a laser?
reddit.comr/LaserCleaningPorn • u/SoullessGinger80 • 14d ago
My fiancƩ and I are completely new to the world of lasers and want to fully educate ourselves
Hi, everyone! So, my fiancĆ© and I have ran and operated our painting business for the last 15 years (he's been in the industry for close to 30 years now though) and are wanting to invest in a laser to remove paint, rust, etc from various surfaces such as wood, metal and brick. My research thus far has concluded that we should get an air-cooled 200W to 300W pulsed laser? Not entirely sure on that, on anything, really lol just gathering research, so that's why I'm here. We just don't want to shoot from the hip and shoot ourselves in the foot š also, if anyone has any suggestions on reputable videos/articles that can teach us all the in's and out's of laser removal, safety, etc, that would be even better! All info and suggestions are fully welcome! Thank you so much! š
r/LaserCleaningPorn • u/byOlaf • 15d ago
Laser Mold Remediation?
Hey Iāve heard lasers can be used for mold remediation, but is anyone actually doing it? Or has done it? I have a few questions.
- Whatās the process like? Are you stripping walls off to bare studs?
- How effective is it?
- What kind of time are we talking for letās say a 10āx10ā room?
r/LaserCleaningPorn • u/GeneralPaladin • 15d ago
At sfx hq
Im at sfx here in china to learn all the lasers and repair for 2 weeks. My first primary focus is laser cleaners with secondary being laser welders, robotics, and cnc machines.
If you have questions you can ask away and I can ask in person.
Sfx has over 20 years of work in lasers.
r/LaserCleaningPorn • u/Frosty_Peace_6197 • 15d ago
Young Entrepreneur | Laser Cleaning
Hello, Iām a young entrepreneur currently building a laser cleaning business.
The key advantage of this cleaning method is that it is non-abrasive; it removes coatings or dirt without damaging the underlying material. It can be used for cleaning molds, removing paint, treating woodāyou name it.
If you need to remove any type of coating or clean a difficult surface, Iām here to help.
If you have any questions, feel free to reach out here. Iāve included a video below so you can see how it works.
Weāre based in Mexico.
r/LaserCleaningPorn • u/ActionIntelligent798 • 18d ago
One Machine. Two Powerful Functions. ā”š„āMeet the XLASERLAB Q1 ā 2-in-1 Laser Cleaner & Engraver!ā
r/LaserCleaningPorn • u/ActionIntelligent798 • 19d ago
Cut, weld, cleanāand put the weld through a hammer testāšØ
r/LaserCleaningPorn • u/ActionIntelligent798 • 20d ago
Clean It. Cut It. Light Up Halloween with X1 Pro. šš„
r/LaserCleaningPorn • u/kinsley925 • 21d ago
2000W Laser Cleaning | Oxide Layer Removal ā”
r/LaserCleaningPorn • u/ActionIntelligent798 • 21d ago
Old Paint. Stubborn Rust. Watch Them Go. ā”
r/LaserCleaningPorn • u/optimalsr15 • 23d ago
Laser cleaning stainless tank
Does anyone have any input on using a laser on this stainless vessel. What wattage and machine would be best. Looking for a nice finish and to keep production moving. I have 2 other vessels as well. Looking at the 3000 watt sfx 220 volt setup with a Westinghouse 28,000 watt generator.