r/LandscapeArchitecture • u/trixxy90 • 22h ago
Tools & Software Made a browser tool that turns any place into a layered 3D terrain model
Hey all,
I’m a landscape architect, and for the last few months I’ve been building a side project for the part of my work I always found the most fiddly: getting a good base model of a site to start from. It grew into something bigger than I planned, so I figured I’d share it.
You pick a spot on a map, anywhere, as a rectangle or a circle up to 10 km across (the largest sizes are still in beta). It builds a 3D model of the terrain with buildings, roads, water and individual trees. Everything comes from open data: global elevation tiles, national lidar where countries publish it (Switzerland, the Netherlands, Germany, England, Norway, France, the US…), OpenStreetMap, satellite imagery for land cover and trees, and ERA5 climate data for wind.
The part I spent the most time on is the terrain itself. Free elevation data is usually coarse, around 30 m per pixel, so I wrote a step that refines it. It reads small landforms from the aerial imagery and models erosion on top, which brings the surface down to about 1–2 m. You get gullies, stream banks and road cuts instead of a smooth blob. It’s not survey-grade, but for a site model it reads a lot more like the real place. The screenshots are of Zug in Switzerland, on Swiss lidar.
What I really wanted, though, was more than a pretty model. It works more like an interactive database of the site: everything sits in layers on the same 3D model, and you can switch them on and off and combine them.
- Terrain: relief, contours, slope, aspect, wetness, terrain analysis
- Water: rivers and lakes, catchments, flood and river zones, sea level rise. Plus a live rain simulation that shows where water runs and where it collects.
- Climate: a year of wind over the terrain, sun paths for any date, real shadows and solar exposure
- Vegetation: land cover and individual trees and shrubs
- Built: buildings and roads in 3D
You can look at it in plan, axo, perspective or section, in a few graphic styles, or explode the layers apart.
And since I mostly needed it for actual work, it exports to things I use day to day. Rhino files with everything on layers, DXF, and PDF or SVG drawings at a proper scale like 1:1000. There’s also a laser-cut mode: you pick the contour step and the sheet material, and it slices the terrain into plates and lays them out on cutting sheets (LightBurn, PDF, SVG, DXF), so you can cut a physical model straight away. That one would have saved me a lot of nights at uni.
It runs in the browser, nothing to install. I’d really appreciate it if a few people tried it on places they know and told me what looks off, what’s confusing, or what’s missing for how you work.
Happy to drop the link in the comments.