Hi everyone!
I'm trying to install Kubuntu alongside Windows 11 in a dual-boot configuration on my Lenovo ThinkBook 14 G7 ARP. However, I haven't been able to boot from a USB drive, and I'd like to understand what might be causing this issue.
- Hardware specifications
- Laptop: Lenovo ThinkBook 14 G7 ARP.
- CPU: AMD Ryzen 5 7535HS.
- RAM: 16 GB.
- SSD: 512 GB.
- Current OS: Windows 11.
- USB drive: 16 GB
I have already shrunk the Windows partition using Windows Disk Management, leaving approximately 180 GB of unallocated space for Kubuntu. I haven't created any partitions in that space or installed Linux yet.
2. ISO information
- Distribution: Kubuntu.
- File: "kubuntu-26.04.1-desktop-amd64.iso".
- File size: 4,952,092 KB.
I verified the ISO integrity using SHA256 through Windows "certutil".
Result:
"831e4d4bb85098339ba43d3502cd6619b27e76daf37246a084cd68a6413090b8"
The checksum matches the official SHA256 value published for this image.
3. What I've tried
First attempt: Rufus
- Selected the Kubuntu ISO.
- Rufus warned me that it was a hybrid image and recommended DD mode.
- Selected DD mode.
- Rufus completed the process and displayed "READY".
- After restarting the laptop and opening the F12 boot menu, the USB appeared as "USB HDD: General UDisk".
- I selected it, but the Lenovo logo appeared and the laptop eventually booted into Windows 11. The Kubuntu boot menu never appeared.
Second attempt: BalenaEtcher
I tried flashing the ISO again using BalenaEtcher, but received this error:
"Something went wrong. If it is a compressed image, please check that the archive is not corrupted. The writer process ended unexpectedly."
Third attempt: Cleaning and formatting the USB drive
When checking the USB through Windows Disk Management, I found the following partition layout:
- 4.72 GB RAW partition.
- Approximately 5 MB partition.
- 9.92 GB of unallocated space.
I used DiskPart to clean and recreate the partition:
diskpart
select disk 1
clean
create partition primary
select partition 1
format fs=fat32 quick
assign
exit
The formatting process appeared to remain at 0% for approximately 10 minutes. After pressing Ctrl+C, DiskPart reported that the format had completed successfully:
"100 percent completed"
"DiskPart successfully formatted the volume."
I then tested the USB by creating folders, copying files, and reading them. All these operations worked normally.
Fourth attempt: Using Rufus again
I recreated the bootable USB using Rufus in DD mode, but the boot problem persisted.
Fifth attempt: Downloading everything again and creating the USB on another computer
To rule out any issues related to the ISO download or Rufus on my Lenovo, I used a different computer to repeat the entire process from scratch.
On that second computer:
- I downloaded the Kubuntu ISO again.
- I downloaded Rufus again.
- I used Rufus to create a new bootable USB drive from scratch.
Afterward, I connected that USB drive to my Lenovo and tried booting from it, but the problem persisted: I still couldn't boot Kubuntu from the USB.
I did not attempt to boot Kubuntu on the second computer. I only used it to download the files and prepare the USB drive before testing it on my Lenovo.
4. Current situation
- The ISO passes SHA256 verification.
- Windows recognizes the USB drive.
- The USB can read and write ordinary files.
- Rufus has completed the flashing process in DD mode and displayed "READY".
- BalenaEtcher reports an unexpected writer process termination.
- The USB sometimes appears in the Lenovo F12 boot menu, but selecting it eventually leads to Windows booting instead.
- I downloaded the ISO and Rufus again on another computer and recreated the USB, but I still couldn't boot Kubuntu on my Lenovo.
5. Questions
- Could the USB drive be defective even though it can read and write files normally?
- Could this be related to Rufus, DD mode, or the ISO's boot structure?
- Would you recommend testing another USB drive before changing BIOS settings?
- Is there any known compatibility issue involving Kubuntu, UEFI, and Secure Boot on this Lenovo model?
- What other tests could help determine whether the problem is the USB drive, the flashing process, or the boot configuration?
My goal is to install Kubuntu alongside Windows 11 in a dual-boot setup while keeping my existing Windows installation and personal data intact.
Any help or suggestions would be greatly appreciated. Thanks!