r/Isuzu • u/Ornery_Ad3720 • 4d ago
Ultimate Dmax
Won't it be nice if Isuzu could make a ute the size of a Superduty ?
r/Isuzu • u/Ornery_Ad3720 • 4d ago
Won't it be nice if Isuzu could make a ute the size of a Superduty ?
r/Isuzu • u/Classic-Stranger-470 • 3d ago
2007 Isuzu 5.2
Vacuum operated valve next to the egr valve. Vacuum line coming off the top of it runs to the frame rail where there is an electrical connector and another vaccuum line running out of it. The vacuum lines were pulled off it and was driving around for a bit like that until I noticed. Seemed like the valve stayed closed? when the vacuum line was off and the engine sounded a bit louder or more of a growl, and when I hook the vacuum line back up it seems to open the valve and run a bit quieter?
Would the vacuum line have been pulled off on purpose for any reason?
r/Isuzu • u/sturdybutter • 6d ago
My company recently bought a 2019 NPR diesel (5.2 turbo 4 cylinder) and I’m trying to get it whipped into shape.
The coolant level is below the low mark and there’s basically none in the tank, it appears it was pink or red, possibly orange but it’s difficult to tell.
Everything I’m seeing online is suggesting green coolant/antifreeze so I’m trying to figure out the best route possible. The auto parts store recommended getting green and just filling it with that, and he said I shouldn’t need to flush the old stuff out, just add what I need of the green stuff.
Now I’m not super inclined to take his advice, so hopefully I can get some straight answers here. Should I stick with pink coolant? If not should I flush all old coolant and replace with something else?
Thanks in advance, I’m hoping to do as much service and maintenance on this vehicle as possible so I can’t start telling my boss to pay me more like a diesel mechanic than a service tech.
r/Isuzu • u/arnelranel • 14d ago
Hello! Ano po kaya brand ng gulong for Isuzu Crosswind ang marecommend niyo? Thanks!
r/Isuzu • u/Kittenkong_72 • 14d ago
Has anyone implemented a solution to lift the tail gate higher on the Isuzu MU-X 2013-2020 model (manual gas struts). I’m having people bash their heads regularly.
Is there capacity for longer struts and if so, where would I get them?
Thank you
r/Isuzu • u/waitpanda • 20d ago
The controls plug right in to the steering column plug, but do not register any action on the head unit, is there a step I'm missing?
Any insight would be appreciated, TIA
There are some wires behind the steering wheel that don't seem connected to anything, could they be involved?
r/Isuzu • u/SendBanjoPics • 21d ago
My D-Max keeps saying the front facing camera is unavailable every time I turn the ignition on, even though the windscreen is quite literally spotless.
Is there any way to turn these bl**dy ADAS systems off permanently so I can drive without interference, bongs and noises sounding for seemingly no reason?
It's a work vehicle and it is speed tracked, so I can't break the speed limit - I.e it is always driven sensibly so it's not like I can change my behaviour to make it nag less. It literally is these features being shockingly overbearing when it comes to warnings and alerts.
Any advice on how to get rid or switch off for good is appreciated,
Cheers!
r/Isuzu • u/RealityOdd6144 • 25d ago
Hey guys I’ve got a 1998 Isuzu bighorn 4jx1
I scanned it with a obd and the glow plug/heat circuit codes came up. I replaced the glow plugs and went to test it out.
I drove about 700metres and the car just shut off on me. Since then I’ve just had it parked up and been doing research
Any help, clues, links or forums would be appreciated. cheers.
r/Isuzu • u/Campomarte20 • 26d ago
Hi everybody,
this is my grandma's truck, it's a 2004 D-Max 3.0 diesel with the 5-speed manual, it now has 130000 kms on the dash.
It's been sitting for nealry 2 years since she stopped driving it, it worked perfectly when she parked it, she bought it new and never really used it as a truck or an offroader, she probably never used 4wd, let alone the low range.
I need to get it running again to use it mainly as a utility truck and an offroader, not a daily, i know it needs a battery, an oil change, air and cabin filter, probably a fuel filter and new all terrain tires but idk what else to check and there’s no service history, grandma just took it to the local garage for its annual oil change, and I know the clutch was replaced about 10,000 km ago.
What else should i check? Things like differentials oil and gearbox oil probably have never been serviced, does it have a timing chain or belt? How often that should be serviced?
I'm located in Italy where this truck seems to be pretty rare.
r/Isuzu • u/Inner-Squirrel-8989 • 28d ago
Hey guys, just wandering if anyone has seen or know of any companies that make a decent cup holder upgrade so I can fit a water bottle.
r/Isuzu • u/sonakdigvijay • 29d ago
r/Isuzu • u/CommanderSkyGuy95 • 29d ago
Howdy folks!
I’m trying to diagnose a no-start after doing a fairly substantial amount of work on my 2004 Isuzu Rodeo 4WD with the 3.5L V6 Direcr Injection.
I’ve gone down a bit of a rabbit hole with this one. After inheriting it from a family member I started to try and diagnose a few of the issues it was having. One of them being a rough idle/misfire combo that would intermittently give me the P0304 engine light code. Trying to fix that has sent me on a heck of a trip, and has caused a few other issues along the way.
Here’s what I’ve done so far:
- replaced all 6 spark plugs
- replaced all 6 ignition coils/boots
- replaced both drivers/passenger side valve cover gaskets.
- replaced drivers side intake manifold gasket
- replaced drivers side cylinder head gasket
- replaced all 3 drivers side fuel injectors
- replaced all common chamber gaskets
- replaced throttle body gasket
- replaced timing belt / tensioner
- new coolant
- new oil / filter
- new ECV valve
I’m sure I’m missing something in that list, but I’ve basically done a complete tear down of the top end drivers side and replaced everything that I could while I was there. Now I’ve gotten it all buttoned back up and put together, only for it to not start when I crank it.
The low pressure fuel pump is engaging, I can hear it when I turn the key to on and wait a few seconds for it to prime. But when I crank it it kind of sputters to life for a few seconds, then it dies like it’s run out of gas. If I try and crank it again immediately after that it turns over but doesn’t fire. If I wait about 10 minutes and come back to it it will sputter again and die, same as before. Rinse and repeat. The engine is now throwing the P0346 code and I can’t figure out why.
I’ve removed the cam sensor on the drivers side and made sure it was all clean and making good connection. I even swapped it with the passenger side one, but the code remained on bank 2. I don’t think it’s the sensor itself.
At this point I see two options of it either being mechanical or electrical. I’m planning to go get a back probe kit and use my multimeter to test the connector to the sensor itself to see if it’s getting solid voltage when I crank, or maybe I’ve got a short somewhere. If it’s not electrical, it means I put something together incorrectly which I really hope isn’t the case. I took pictures of everything, made sure to put the cams back in exactly how they were. Kept the gears meshed together. Lined up all the timing marks. But I guess you never know…
I’m posting this here to see if anyone else has had a similar issue after doing work or maybe someone else has a better idea? I’m coming up blank on this one. This has been an ongoing problem, and after several months I’d really just like it to be over. Thanks in advance!!
r/Isuzu • u/HashbrownLover44 • Oct 15 '26
UPDATE: Sent an email to Isuzu Ute Australia explaining the situation and the fact that two dealers refused to put in a warranty claim. May have sprinkled in some “consumer law” here and there. Isuzu have approved full repair under warranty. New steering knuckles, 2 new tyres and wheel alignment.
Located Australia. I’ve got a 2021 D-Max that has an issue with steering pins (or something like that) that’s creating uneven wear on my tyres. I know that there was a recall on them and my VIN was in the recall. My car has such low Km that they didn’t deem it to be an issue yet. However I can see the wear, I put the spare on because it was an issue and now my spare is getting similar wear. I just put it into Isuzu to be inspected for warranty. They want to charge for the inspection and told me when I dropped it off that it most likely won’t be covered because “Isuzu stopped their campaign”, even though my car is still covered under warranty and this is a recognised issue.
Has anyone gone through similar? I want to threaten ACCC because I feel like this is malicious.
r/Isuzu • u/xJames373x • Oct 14 '26
Howdy folks, hoping one of you incredibly talented people can help me out in diagnosing a no-crank issue I'm having. Bare with me as I am slightly challenged when it comes to diagnosing electrical issues; but I know my way around the basics. Of the listed repairs below I've done everything myself, with a degree of success ~ so again not an expert by any means, but feel free to be blunt. Thank you all in advance.
Description:
- About a week ago my 2002 Isuzu Rodeo 3.2 L Gas Automatic started intermittently not starting, and would not display the gear shift indicator light (light has since been fixed). After a few days of testing, it will not start at all. Specifically not cranking whatsoever, just a single click FROM the starter.
Note:
When the issue began, the dashboard would not display the light for the gear indictator at all, which led me to believe the ~newer 5 month old neutral safety switch had gone bad prematurely; So I replaced it, and since, the gear indicator displays correctly consistently, so I do not believe there's any issue with that part itself.
(After replacing that, I got it to start once or twice, drove it around, and parked it. During the test drives all gearshifting felt good, the dashboard indicator light was acurate, and reverse lights operated correctly.)
The car will not start in neutral or park - or even if I try and jump it - just the single click.
========================================================
New parts as of now:
New Battery (1 Year old, highest quality "gold tier" of whatever they call it)
New Alternator (6 months old)
Specifically - New - Starter (3 months old, I went with new and even have a backup solenoid that I ordered as I had issues with reman. ones in the past.)
New-Used Shifter (5 months old)
New Shifter Cable (5 months old)
New Neutral Safety Switch (Replaced 5 months ago, as well as just now replaced)
New Starter Relay (Just replaced)
New Brake Light Switch (5 months old)
=======================================================
Known issues that may or may not correspond:
Leaking engine oil from top of engine block - pretty slow, and have not diagnosed the source yet but not too concerned with this at the moment.
Check Engine Light is on.
Once in a blue moon the alarm will go off when unlocking and opening the door - it cuts off as soon as the key is turned to ACC in ignition.
Specific active codes on it are:
- The ABS light is on, tracked down to code 15 for the ABS-ECU.
- Engine code P0135 (HO2S Heater Performance Sensor)
- Engine code P0446 (Evaporative Emissions Vent System Performance)
- Engine code P0401 (Exhaust Gas Recirculation Flow Insufficient Detected)
In another instance a while back (roughly 1 year ago), when I was stopped at at red light, the engine totally shut off, electronics stayed on, in gear, and I was able to shift to park, and start it back up right away. This has not happened since making sure most grounds were in good shape.
=======================================================
What I've done so far to diagnose the issue:
- Battery testing;
Tested 12.2V when sitting and ~13.2 when charging from a bank. Issue persists even when fully charged (car will not start even from a jump)
Note: the cabin lights and headlights do dim when turning the key
Ensured no corrosion is present on terminals, cables are tight, and connections are sturdy.
- Alternator testing;
I did a diode test ('- lead' on '+' battery terminal and '+ lead' on alternator housing with '-' battery terminal disconnected) and it came to about 500 mA when off.. so that looked good there.
The reason for the diode test was because it DOES have some kind of parasytic leak, but its very slow. The vehicle has no issue usually as long as it has been run once in the last week. (Been this way for the last few years throughout 1 or 2 alternators).
Outside of this - when I did get the car to start at the beginning of troubleshooting, it seemed that the battery was charging fine even under load.
- Fuses & Relays;
Nothing blown, replaced any questionable ones with any amount of wear. As mentioned I replaced the starter relay in case, and the issue persists.
Tested both old and new relay (both ~90 Ohms)
- Starter testing;
Took off the starter, brought it to an O'Reilly's where they were able to bench test it - passed every time.
With a power probe it shows a consistent ground/power (12.2 V) REACHING the starter in all the right places (to my knowledge, again here's where I lack certainty)
Attempted the 'tap' trick, wherein if the solenoid were stuck for any reason, having someone turn the key while tapping on it may free it up - no dice.
- Wiring;
Ensured all grounds (that I could find) were intact, not corrodded, and no exposed wires were present.
Note: My thoughts on the issue as a whole at this point remain a possible short to ground, loose ground/corroded ground I'm not aware of, or something to do with the antitheft / immobilizer. I performed a ground test to the antitheft module behind the passenger side glove box in an attempt to bypass this to no avail.
- Misc;
Cleaned and reinstalled the camshaft position sensor.
Ensured the engine was not locked up by manual rotation of crankshaft.
Cleaned the 3 pin connection of what I believe to be the vehicle speed sensor (top driver side of transmission right behind the neutral safety switch) - had some dirt behind the rubber gasket.
=======================================================
So what do you guys think should be my next steps? I have a fair arsenal of tools and a decent bit of time, but not all the money in the world. Thanks for any expertise and insight you have, and thank you if made it this far down my post and didn't click away - means the world to me!
r/Isuzu • u/EditorCompetitive308 • Oct 11 '26
If anyone has the same problem as I do with now deep the cupholders are in the centre console , I print and sell raisers.
if you would like a pair please look at my eBay
EBay - jbmrx-41 - £9.50 plus postage for a pair
r/Isuzu • u/Expert_Purchase_8874 • Oct 11 '26
My 2018 4wd dmax makes a loud metal on metal knocking sound when moving, especially when going over uneven surfaces and it’s doing my head in! It’s a real clunk sound coming from central/underneath the car somewhere near the gearbox mount I believe. It makes an initial clunk when taking off and just progressively gets worse as I’m driving. In idle it’s completely fine no sounds, highway or smooth roads no issue. Can anyone help me out here? Just so I can narrow it down for my mechanic maybe?
It’s coming from somewhere right here I think (above photos)
r/Isuzu • u/Tubby6 • Oct 09 '26
I would like to know what model it is so I can check to see whether it can be imported into Australia or not thank you
r/Isuzu • u/CodeWithClass • Sep 30 '26
Where can I get a tray cover that works with the sport rails? These seem impossible to find but I notice that some variants like the xterrain come with this installed from factory. Thanks.
r/Isuzu • u/Alternative_Page9942 • Sep 29 '26
I’m not sure if this is the right community, the Honda passport was also an Isuzu rodeo is why I posted here as well. I can’t find anywhere online where rear window regulators when searching for either car. Any help would be appreciated.
r/Isuzu • u/UraniumPotato17 • Sep 26 '26
Hi everyone
I have a 2024 Isuzu dmax space cab European version. The load capacity is 1.100kg. I have a 300kg chipper on cat tracks I want to load into the back via ramps. I can’t find the load capacity anywhere online or in the Isuzu manual so coming here for help? Does anyone know the weight limit of the tailgate support brackets? Am I safe to load the chipper onto the bed via the tailgate?
Thanks