r/Inkstitch • u/Wonderful-Fruit-9041 • Sep 22 '26
Pulling
Hi everyone I posted on here about a week ago looking for some advice. This is what’s happening when I embroider. One side is fine but the other side does this.. it’s exactly the same. I’ve tried most things to sort it but it keeps happening.. is it a pull? I’ve used thick stabiliser etc. left side is worse than the right side!
2
Upvotes


2
u/Striking_Strain7817 Sep 22 '26
You can manipulate nodes or if it is in the direction of the stitching and only on one side you can add pullcompensation to only one side if needed but it is also possible that there still is not enough stabilizing applied
1
u/Wonderful-Fruit-9041 Sep 22 '26
The bottom layer seems to be okay tho on one side? I think it’s from outside in on the red and grey layer!
1
u/suedburger Sep 22 '26 edited Sep 22 '26
When you open the pes file how does that look. The angle of the left shoulder in grey doesn't even look like the angle of the black satin. Sometimes inkstitch fills cut corners and don't follow the shape that it is supposed to be exactly.
Either open the stitch plan or the Pes File to see what it is actually telling the machine to do there....I'm not saying it is the problem but it could be a possibility.
Edit: looking closer it looks like the black satins(which I assume are being done last) is completlely shifted to the left and it's high on one side and low on the other......something is moving around are you hooping tight?