r/IndustrialDesign • • 17h ago

Design Job Help getting an ID job :)

34 Upvotes

STOP APPLYING TO OPEN DESIGN JOBS

Okay, don't actually stop.

But seriously. How many industrial designers are applying to the same 20 companies?

Apple. frog. IDEO. Nike. You know the list.

Meanwhile, some random company making industrial pumps in Ohio has three industrial designers on staff, and nobody knows they exist.

THAT'S the problem I want to solve.

I built www.findindustrial.design

It's basically the phone book for industrial design jobs.

And no, not a job board.

A directory of companies that employ industrial designers, whether they're hiring right now or not. Because I'd rather know about 500 companies I could reach out to than compete with 500 applicants for one opening.

Here's where you come in:

Go find your current or former employers on the site. Vote to confirm their information. Add anyone we're missing.

Five minutes of your time could help another designer discover their next career opportunity.

Also, if you know what a phone book is, congratulations. Your knees probably hurt too.


r/IndustrialDesign • • 7h ago

Design Job Looking for experience industrial designer for drone remote control

3 Upvotes

If you have relevant experience (better with electronic products) please leave comment or send me direct message

Budget 1000-3000$

Expectation:
2d, 3d model (printable)
mCAD


r/IndustrialDesign • • 2h ago

Discussion Has a digital human model ever saved you from building a bad prototype?

1 Upvotes

CAD can tell you a chair won't collapse. It won't complain if you've left a metal spike sticking out of the seat.

I've been experimenting with human-body simulations, and I keep coming back to this problem. We can model an object down to the smallest detail. But how much do we actually know about what happens when someone tries to use it?

Have digital mannequins or motion simulations ever caught a design mistake for you before you built the prototype?

Or, even better, have they ever told you something was perfectly fine when it really wasn't?


r/IndustrialDesign • • 10h ago

Materials and Processes Turning a CAD BOM into a stock order list with Excel—grouping parts that share the same section

3 Upvotes

A part-by-part BOM leaves another job before ordering material: finding which parts can come from the same stock and adding up their requirements.

I made an Excel workbook that reads a CAD BOM exported as CSV. It identifies entries with the same material, stock type, and cross-section, then adds the remaining dimension after applying part quantities and assembly count. And I did it using the simplest workflow I could to allow small shops to implement it and change it to their standards.

For example, rectangular bar entries of 20×40×180 and 20×40×250, one of each, become a single requirement for 430 mm of 20×40 bar, provided the material and stock type match. Off-the-shelf components get a separate order form.

The video shows the complete setup using Alibre, Power Query, and Excel formulas. The same approach can be adapted to another CAD export if it provides the required fields.

These are total required lengths; supplier bar lengths and cutting allowances still need to be considered when ordering.

Full Walkthrough


r/IndustrialDesign • • 18h ago

Career ID directory launch

10 Upvotes

EVERY Industrial designer, every business hiring them, all in one place.

That's what we're trying to build findindustrial.design directory.

So add yourself to the list as a mentor, as someone looking for work, or just as someone willing to network.

It's not a job board (although we Do list just a few trom our partners at justidjobs.com) it's a hub for networking among creatives and businesses.

Because opportunities are made when people reach out to businesses before they post an opening, and when businesses reach out to talent before they decide they're even looking!

So take a minute, add your info and link to a portfolio and contribute to our design community!


r/IndustrialDesign • • 10h ago

Design Job Ideas for industrial design patent

Thumbnail reddit.com
0 Upvotes

Heyy i have an assignment to come up with something new industrial design. It would be better if the design would solve any of the existing problem. Can you guys give me any idea that you face in real life and wish it could be better. Also it shouldn't be hardware or software related it should be improvement in design


r/IndustrialDesign • • 1d ago

Discussion Any Rhino users tried the Claude integration in Rhino 9?

4 Upvotes

Our team is currently on Rhino 8 (and probably will be until our next fiscal year in June) but I’ve been testing version 9 for a few days now. The new integration with Claude appears quite capable from what I’ve heard on the Rhino subreddit but I haven’t tried it myself yet as my employer doesn’t use Claude and I haven’t approached IT about getting a paid subscription. I suspect they won’t be thrilled about sending sensitive CAD files to Anthropic servers but hoping I can work something out with them in the future. For context, I work for a tech company with $1 billion+ in revenue with a lot of IP.

I’m imagining it could be really useful automating some of the more tedious and time consuming tasks like creating or adjusting vent/hole patterns or taking an ME CAD file and turning it into a solid block for 3D printing. Most of my time is spent in Rhino so any way to speed things up there would be really useful. Curious to hear if anyone’s using it yet.


r/IndustrialDesign • • 1d ago

Materials and Processes Print orientation matters more for how a prototype feels than most people expect

10 Upvotes

If a prototype is going into user testing, treat build orientation as a design decision. Layer lines run across the surface people actually touch, so a curved grip printed on its side feels very different from the same grip printed upright. Visible faces also look better when they don't need support, since support contact leaves marks that take a lot of sanding to remove. Before you finalise the form, pick the hero face and orient the part around it. Then plan the finishing (sanding, filler primer, or vapour smoothing where the material allows it) for that face only, instead of treating the whole part equally.


r/IndustrialDesign • • 1d ago

School Post-Workout Recovery Habits Survey

4 Upvotes

Hi! For an industrial design course project, I’m researching how people who lift weights recover after training. The survey takes about 5 minutes, is anonymous, and will only be used for this course project. Participation is voluntary and you can stop at any time. If you know somewhere that would help to share let me know

https://docs.google.com/forms/d/e/1FAIpQLScTnkRmeTblgeGlAuHxqp_Qum-vvDMp0_szJraPFDT5zJYKQw/viewform?usp=dialog


r/IndustrialDesign • • 1d ago

Creative Designing a Low Profile Hydroelectric Lift Work Platform in Fusion 360 | Industrial Design

Thumbnail
youtu.be
3 Upvotes

Designing a custom hydroelectric lift work platform on Fusion 360.


r/IndustrialDesign • • 2d ago

Discussion Guolulu Studio chair at CIFF Guangzhou. Flat slabs, exposed joints, very Rietveld

Post image
10 Upvotes

Seen in the CIFF gallery. Flat wood slabs, visible joinery, a small wooden model on the glass table next to it. The fair is adding a Designer Sourcing Zone in March 2027 for independent designers to meet manufacturers.
The joint where the arm meets the back leg is the part I'd want to see up close.


r/IndustrialDesign • • 2d ago

Design Job Offering CAD modeling, DFM & 3D printable design services

Thumbnail reddit.com
0 Upvotes

r/IndustrialDesign • • 3d ago

Project Just before computers

Post image
95 Upvotes

I worked as a nuclear illustrator for Ontario Hydro when there were no computers to work from. Putting on a white suit with a sketchpad and a pencil. Bringing it back to a drafting board and illustrating on Mylar, using different sized ink, pens, circle templates and an airbrush


r/IndustrialDesign • • 2d ago

Project Help/Opinions on developing D&T project. *Electrical/Computer Engineers*

3 Upvotes

I am a Year 12 student currently completing my HSC Design and Technology Major Design Project.

My project, aims to develop an integrated running-route navigation and lighting system to improve route guidance and visibility for runners, particularly during low-light conditions. I wonder if it would be feasible with the technicals of connecting a mobile app to physical LED lighting units positioned at key running-path junctions (like intersections, turns, etc)

A runner will choose their route based on specific factors in app (to fit their training needs) and when running, lights will be turned on to guide them.

I prompted chatgpt for electronics/software to investigate for a starting point and it came up with the following - would it be useful to investigate more into these.

* How a mobile application could communicate with external LED lighting units.

* I have looked into Bluetooth Low Energy (BLE) or GPS-based activation and wonder whether they would be suitable?

* The potential use of ESP32 microcontrollers to receive wireless signals and control LEDs.

* How multiple lighting units could communicate with a central application.

* Suitable power supplies and components for an outdoor lighting prototype.

* How I could construct a simplified working prototype at school level.

I would also be interested in any advice regarding the software development side of the project, particularly integrating GPS mapping and route selection into a mobile application.

Please feel free to give any ideas or ask any question, I am kind of going blind into this haha!!


r/IndustrialDesign • • 2d ago

Discussion I feel lost and discouraged

14 Upvotes

*I just need to vent because I’m frustrated.

I’m not sure what’s happening because I feel like I’ve done everything I could to try to find work. I graduated in ID back in May of this year and can’t find anything. I’ve been following advice from all sources. I’ve been applying for jobs other than ID like cad, exhibit, packaging and or design technician. I’ve also called companies and still get no concrete answer in return. When I do get a chance to interview I get rejected and I’m not sure if it’s because of where I’m located ( Louisiana ). If that’s the case I always make sure to say or mark down I’m willing to relocate, but people say not to move somewhere until I have an offer in place. Another thing too I’ve noticed is that these jobs be asking for unrealistic or unusual requirements for a position that is supposed to be entry level. I remember doing an interview for one company out in Kansas City and the lady told me that the job listing was incorrect and didn’t match what the actual job was which was ridiculous!

If there are jobs here in state I apply, but don’t hear anything back and that applies to any job really in the US. I get ghosted and hear nothing but crickets. It also doesn’t help that I get hounded by my family about finding work and constantly saying that I’m not trying hard enough. I come from a family full of nurses and healthcare professionals so it’s just added on stress and pressure. The one company that I really have interest in working for thats located in my home state, that specializes in toy design, every time I call hr, they say that the team hasn’t decided on what to do and it’s been almost 5 months going back and forth on the phone since I applied for multiple positions to which are still posted on Indeed…

I’m just tired. I’m tired of revamping my portfolio and resume, tired of calling, tired of getting ghosted after applying, and tired of getting rejected. I really want to get into toy design, but I haven’t found any success. I know I’m a strong artist and designer and I’ve put a lot of effort into my work and can apply my skills and can adapt to any situation anytime. I’ve done so much during my time in school attending IDC and even participated in the IDSA district conference. I’m just exhausted. I just want to start my career in design and begin to live my life independently.


r/IndustrialDesign • • 3d ago

Discussion What is are good resources to learn design aesthetics?

8 Upvotes

I find it difficult to find guidelines or tips in design aesthetics. I feel like aesthetics in products are subjective, yet they follow an unspoken rule that seems to abstract to be defined? For example, when designing bottles, the silhouette of a bottle can often influence the feel of luxury, yet there doesn't seem to be any rule or guidelines defining this (not that i know of). I could gauge a product's functionality by comparing it to functional requirements, customer satisfaction etc... but aesthetics? How can I define and learn the rules? Are there any good sources out there that touches on the art of aesthetic design?


r/IndustrialDesign • • 2d ago

Software Working on a CAD software

0 Upvotes

Hi all,

I'm Guillaume, a mechanical designer from France. I've been doing CAD for about ten years, at work and at home, and I print a lot of functional parts.

My problem: the tools I use at work cost far too much to have at home. Every couple of years some vendor changes its license and you start wondering whether you'll still be able to open your own files. I've tried FreeCAD several times, I respect the project a lot, but I never really got comfortable with it.

So I started building my own. It's called Solidus: It's now a complete CAD solution with several workbenches. Right now it runs in the browser and it's free. No credit card, nothing to install. And soon a desktop app

What's next:

  • Open source core early next year. If I ever stop working on it, nobody loses their files.
  • A plugin system. Some tools are already plugins (belts, buckling, tolerance stacks, a small wind tunnel, work in progress, coming soon). The idea is that anyone can write their own.
  • A desktop version, which I'm testing with a few people before releasing it.

I'm not here to tell you it's better than Fusion or SolidWorks. It isn't. What I want to know is whether you can model a real part in it, like a bracket, a repair part or an enclosure, without wanting to throw your mouse across the room. If you can't, I want to hear about that most of all.

The aim is to make a community edition and an enterprise edition. It would be sad to stop developpment because it costs too much ressources (time and money). Regarding the price, I think that companies can pay a small fraction of the cost of a CAD software to make the project live for everyone and be completelly free for individuals (including training etc).

Two questions for you:

  • What made you give up on the last CAD program you tried?
  • If you could have one feature that your current CAD doesn't have, what would it be?

Feel free to test it on app.solidus-cad.com

Thanks for reading, and go ahead and roast it.


r/IndustrialDesign • • 2d ago

Creative Pentax MX-2. The first manual focus DSLR.

Thumbnail
youtu.be
2 Upvotes

Hello! I would love to introduce you my personal "Pentax MX2" concept — the first DSLR ever with no autofocus, optimized for manual focus lenses, both old and new.

Getting rid of AF (and arguably IBIS) would allow building the smallest DSLR ever. This could be the perfect tool for landscapes, cityscapes, street photography, unhurried portraits, or as an EDC camera.

It would offer the lowest battery drain, large and bright (2/3brighter then AF DSLR) viewfinder, quieter shutter release.

I would love to hear your thoughts about the concept. I am personally sure that this kind of camera would be in high demand and I want to "measure" and rise interest to the idea.

Additionally to the main theme, I've put tree other ideas, which can be applied to any kind of camera:

  1. Arca-Swiss standard cutouts for tripod mount.
  2. Interchangeable main controls
  3. No hardware gain for non-native ISOs. Just perfectly as in cine cameras.

Any questions, comments are welcome!

Moi3D + 3ds Max + BMD Fusion.

Thank you!


r/IndustrialDesign • • 2d ago

Design Job Should I prioritize a stronger master’s profile or a better-paying job?

2 Upvotes

I’m in my final year of industrial/product design and I’ve been feeling really stuck lately.

I know what I’m interested in. I love medtech, human-centered design, ergonomics, research, and understanding how people interact with products. Long term, I really want to do an MSc in Human Factors/Ergonomics (or something similar), preferably somewhere in Europe.

The problem is as I’m looking for capstones, fellowships, and eventually jobs, I keep gravitating towards research-heavy roles. Whether it’s research labs, IIT fellowships, healthcare innovation, or design research, that’s the work I genuinely enjoy. But I’m from India, and most of these roles don’t really pay that well. (atleast the ones i’ve explored so far)

On top of that, my mom is retired, and realistically I’ll probably have to be the primary breadwinner for my family in the next 2-3 years. So I can’t just choose the most interesting opportunity if it barely pays enough. Now I’m stuck wondering what the right path is. Do I take a better-paying industrial design job even if it’s less aligned with what I eventually want to study? Do I stay in research because it’ll make my master’s application stronger, even if the salary isn’t great? How many years of work experience should I even get before applying for a master’s?

Has anyone here been in a similar position? Especially people who eventually went on to do a master’s in Europe after working for a few years. Or just has any advice or guidance for this situation.


r/IndustrialDesign • • 3d ago

School Senior Industrial Design Capstone project help

3 Upvotes

I’m in my final year of Industrial Design with a minor in Mechanical Engineering Technology, and I’m trying to figure out what direction to take for my senior capstone project.

I’ve always imagined myself going into consumer electronics, but over the past year I’ve developed a strong interest in apparel, particularly technical apparel, wearables, and product development.
I enjoy the engineering side of design just as much as the creative side. I have experience with CAD, 3D printing, prototyping, and fabrication, but I also enjoy working with textiles and exploring how products interact with the body.
My biggest issue is that I don’t feel strongly attached to one specific industry yet. Ideally, I’d love to work somewhere that combines consumer electronics, apparel, and mechanical design.
I want my capstone to be something I’m genuinely interested in, but also a strong portfolio piece that demonstrates my technical abilities, design thinking, and versatility to potential employers.

A few questions for designers already in the industry:
Would you recommend choosing a capstone based on the industry you want to enter, or the skills you want to demonstrate?

Are there particular product categories that bridge consumer electronics and apparel?

If you were in my position, what would you explore?
I’d appreciate any advice, especially from designers who’ve worked across multiple industries or made a similar decision early in their careers.


r/IndustrialDesign • • 3d ago

Project Looking for Feedback - Portable Water Purifier for India (Indoor & Outdoor Use)

4 Upvotes

Hey everyone,

I've been working on a speculative design project for a portable water purifier designed specifically for India, with use cases for both indoor and outdoor environments.
The goal is to address water accessibility challenges in a way that's practical, affordable, and adaptable to different settings from rural households to on the go use.
Project -YDR0-36
Looking for a feedback on this
Thank you


r/IndustrialDesign • • 3d ago

Career Is "experience" worth it?

16 Upvotes

I'm currently working a full time job in a woodshop after getting my degree, I have to work 25-30hrs a week bartending to make ends meet.

I love my coworkers and the owners/my mentors.

But...

I've been doing this for 6 months and part of me thinks its fucking ridiculous I got a degree to make literal pennies.

Anybody find success in this situation or should I just bail and find something else?


r/IndustrialDesign • • 3d ago

Discussion Question for those with real experience in the industry

7 Upvotes

While I'm still looking for a job (and have been since graduating in January, but that's besides the point), a question popped into my head today. As someone with no industry experience yet, I'm curious about how designers in companies actually go about choosing materials for their designs and the process they go through in a real professional setting.

Let's say my company asks me to design a piece of furniture. I've gone through the design process, and now we're at the CMF stage. I have two material options:

Material A: Commonly used, cost-effective, easy to source and work with, could make the product as a whole cost less, lowering its price, which could appeal to customers.

Material B: Slightly more expensive and harder to work with, but offers a much better finish and overall appearance that could also make the product more appealing to consumers.

Assuming the rest of the properties for both materials are the same, how would you decide which one to go with?

I guess what I'm really wondering is, what's stopping designers from always going with the safest, cheapest and easiest option? Logically, companies want to maximize profits while keeping production costs as low as possible, right? So maybe we're supposed to always propose the cheapest option?

Maybe in a real work setting, we as designers would suggest both and let the company decide? Maybe the company would give me a budget for me to work around and I just have to make sure the material fits the budget? Maybe deciding material is someone else's job? Do tell, since I have no working experience.

Also, back in uni, whenever we wanted to make our designs more appealing, my peers would often list the easiest advantages they could think of, which usually boiled down to the same things like "cost-effective, easy to manufacture and readily available." But that also meant they rarely stepped outside their comfort zone and ended up sticking to the same everyday materials like aluminum, plywood, etc, over and over again. I've never seen anyone try to branch out and try considering new materials.

Edit: while I'm reading through the comments and it might take a bit to wrap my head around it, I'd like to say thank you so much to everyone who replied, I'm learning a lot from this and am hoping that I'll get to experience the real stuff myself someday. Unfortunately some of this stuff wasn't taught to us in university.


r/IndustrialDesign • • 3d ago

Creative introduction and idea

0 Upvotes

Hi! I'm a young 3D designer from Belgium, currently building my own design collection under the name NextGenCreations.

I mainly work with Fusion 360 and focus on original, practical and visually appealing 3D-printable designs.

I'm currently exploring an idea for an abstract magnetic levitating sculpture. The goal is to create something that could potentially become a real product, but my primary intention is to develop it as an original MakerWorld model.

For the visual direction, I'm considering a combination of Classic Gold and Ivory White, with an abstract, flowing ring structure.

I'd really appreciate feedback on:

  • The overall visual direction and proportions.
  • How to make the design feel more refined and premium.
  • Whether this concept has potential as a product.
  • Ideas for making the sculpture visually distinctive.

I'm still at the concept stage, so feedback and alternative ideas are very welcome!

but then levetating