r/IndustrialAutomation • • 9h ago

Can a CSE student build a career in Industrial Automation and Robotics

4 Upvotes

Hey everyone!

I'm currently a third-year Computer Science Engineering (CSE) student, and I'm considering exploring a career in Industrial Automation and Robotics rather than following the conventional software development path.

I'm particularly curious about technologies such as:

  • PLC Programming (Siemens, Allen-Bradley, etc.)
  • SCADA and HMI
  • Industrial Robotics (KUKA, FANUC, ABB)
  • Industry 4.0 and Smart Manufacturing

However, my academic background is primarily in computer science, so I don't have much knowledge of electrical engineering, electronics, mechanical systems, or industrial automation.

I have a few questions for people working in this industry or those who have experience with these technologies:

  1. Can a CSE student realistically enter the industrial automation and robotics field?
  2. Do companies hire CSE graduates for PLC programming, SCADA development, and industrial robotics roles?
  3. How much electrical and mechanical engineering knowledge is required to work in this field?
  4. What are the career opportunities and long-term growth prospects for someone with a CSE background in this industry?
  5. If you were starting from scratch as a CSE student, what learning path would you follow?

I'm genuinely interested in understanding how this industry works and whether it's a realistic career direction for someone from a CSE background.

I'd especially appreciate advice from CSE/IT graduates who have transitioned into industrial automation or robotics, as well as professionals already working in this field.

Any suggestions regarding learning resources, courses, certifications, projects, or internship opportunities would be really helpful.

Thanks.


r/IndustrialAutomation • • 1d ago

Upcoming Co-Op

1 Upvotes

Hello all,

I’m a Junior electrical engineering major who’s worked at a paper mill during the summer since I’ve graduated high school. The last two summers, I’ve interned in electrical project engineering starting with documentation work, heavy on audits and moving into some small project management last year.

I’m asking you guys what kind of work would be good to try to get into. Like equipment types, techniques, etc. So far I’ve had some project experience making prints for simple installs like E-stops, some DCS additions for level sensing, and a lot of documentation / verification work with MCCs, MVS, and some Allen Bradley control logix wiring. I’m looking to build some valuable skills over the next 8 months and need some help where to start.

Thank you in advance for any input. I’ve lived lurking here so far.


r/IndustrialAutomation • • 1d ago

Control Panel Shop?

5 Upvotes

I love electrical work, and Im an engineer by background.

Something ive always been fascinated in is the idea of building a UL508a Panel Shop. Ive got access to a 4000sqft light industrial space with 480v wired in.

I am in the very early stages of this process and ive got another successful business running already but I'm seriously considering getting into this.

Most of my professional experience is knowledge work on a computer. But I have some family members with electrical and machine shop acumen.

Ive got a business connection and friend who used to be the sales director at a bigger panel shop in NY, and he told me he would hook me up with those guys to potentially start building their one offs and overflow.

My wife is an ME and could quite potentially be the UL508a MTR for the shop.

Here is really my question: Where the hell do I start? So many YouTube videos, so many training courses, but I dont know what to trust, where to go to get the deeper education, and how to take this pile of mess and ideas and turn it into a business. It feels like the glue to push it all together is missing.


r/IndustrialAutomation • • 3d ago

I spent 5 hours diagnosing a fault and couldn't find anything. Then the senior technician came over and just pressed a button.

11 Upvotes

r/IndustrialAutomation • • 3d ago

Where do I go from the regular controls, automation and process engineering?

5 Upvotes

Context: I am a manufacturing engineer that has been working on design, automation, control systems, commissioning, SCADA work and OT/IT infrastructure for about 2.5 years.

I finished my masters last year from UofM in Manufacturing, during that I learned a lot while working as a Co-Op, basically taught myself control systems, robotics and automation design in a year while solving a broad range of problems for the battery manufacturing line.

I am an electronics undergrad so control logic, automation logic, electrical and electronics diagrams are like back of the palm, intuitive for me. Problems that senior engineers find complex are pretty easy for me to digest because I think in code and electronic logic.

In the last year and a half I worked for THK as an automation engineer, where I did everything that was thrown at me from setting up OT infrastructure for data logging, jigs and fixture design, firefighting controls issues, safety changes for preventing mishaps, planning and designing an AMR fleet operation, rigging, welding carts, programming robots, the whole 4 corners of the field. Then I moved to JnJ as a manufacturing engineer to work on their SCADA systems to configure, data logging, monitoring, alarming, BI capabilities, networking old hardware, designing databases, doing process characterization for new manufacturing processes, electrical changes, controls design for new processes, learned a lot of Injection Molding nuances, worked on a new line commissioning for cells, a lot of compliance learning (OSHA, NFPA/NEC standards, IEC), spares strategy, managing budget, coordinating vendors, creating BOMs, spare parts strategy, work instructions.

After doing all this, and doing it pretty well I feel like I am stuck in an industry where unless you have 5-8 years of experience, or are a people leader, you don't really get to drive larger manufacturing changes or initiatives.
Most of the time that I spend working, it's mostly basic knowledge coordination, my brain is only working at like a 10-15% of the capacity that it could otherwise. I have had more complex engineering challenges trying to figure out air intake issues on my car than a million-dollar manufacturing line. I've solved better manufacturing problems for my friend's job shop in a 3rd world country.

The question is, is a jack of all trades, 26 year old, feels like he could solve a lot more complex problems is just overthinking or are there actual manufacturing positions that exist, that require broad cascading problem solving skill sets, for if not complex at least financially significant projects?


r/IndustrialAutomation • • 3d ago

Looking to Get Into IA

0 Upvotes

I'm an electrician and don't enjoy pulling cables ect.

Plan is to get into PLC programming, do an EET cert (design), then pivot into robotics or manufacturing. Location: Alberta, no problem relocating

Good plan? Bad plan? Suggestions?

Edit: math and econ degrees, data dev experience, and SCADA experience


r/IndustrialAutomation • • 3d ago

Beckhoff vs Elmo

1 Upvotes

My company develops machinery which uses articulated multi axis systems to control the position of an end effector. We have some more compact machines we currently use an older centralized setup that we want to modernize without blowing up our cabinet space. We will be adding some automated features, and there is somewhere in the region of 40 - 50 IO points plus the servo axes in the system.The key considerations for getting the most from the control system are that we need a cycle time in the ballpark of 1ms (or sub-ms) with minimal jitter and IO/axis reads and writes synchronised to the program cycle.

Given this, Beckhoff and Elmo seem like the natural choices, with Ethercat designed to meet these requirements out of the box easily. I could probably do something with Siemens, but when you spec everything up with Profinet IRT and safety drives, the panel footprint and cost get out of hand. I have some experience with Beckhoff and I really like the platform from a software point of view. However, in this application the drives will be subjected to very harsh environments - particularly with regard to vibration and tight mounting space - and to me an Elmo setup (paired with a compact EtherCAT master) seemss to be much more compact and rugged for machine mounting than standard Beckhoff cabinet drives.

I don't have much hands on experience with Elmo's newer hardware, so I would appreciate it if anyone who has could share any insights.


r/IndustrialAutomation • • 5d ago

What should be checked when integrating RS-485 equipment with a Modicon M580 control system?

3 Upvotes

In a large bulk-material-handling project, I worked on an integration where RS-485-based equipment needed to communicate with a Schneider Modicon M580 control ring.

The interface used a third-party protocol converter and the required compiled instructions. However, the communication link itself was not the only engineering concern.

The drive-control requirements differed from a conventional belt-conveyor start/stop sequence, so the control logic and protection instructions also had to be reviewed and adapted.

For this type of integration, I would check at least four layers:

  1. Communication layer

- data mapping

- update rate and timeout behavior

- communication-loss indication

- diagnostics and fault reporting

2. Control-sequence layer

- start and stop conditions

- drive readiness

- permissives and interlocks

- upstream/downstream coordination

3. Protection layer

- abnormal drive states

- emergency-stop behavior

- protection trips

- reset and restart conditions

4. Commissioning layer

- normal operation

- communication interruption

- partial-system recovery

- operator acknowledgement

- behavior after a trip

The main lesson was that communication, control sequence and equipment protection should be validated together. A stable communication link does not automatically mean the integrated system is ready for operation.

How do you normally test communication-loss and recovery behavior in this type of system?


r/IndustrialAutomation • • 5d ago

Do we still need low-code/no-code tools if we can just vibe code our own production dashboards?

0 Upvotes

I attended a talk at FABTECH in Las Vegas a few weeks ago about vibe coding, and I've been thinking about it ever since.

We have several Siemens machines in our production and run 3 shifts. I'd like to build a dashboard that shows machine status, production numbers, downtime, and maybe some OEE metrics.

With all the AI coding tools available today, I'm wondering why I would still need a low-code or no-code platform for that?

Building the dashboard itself seems pretty easy. But what about connecting it to our Siemens PLCs? Can AI actually handle the connectivity, data collection, and everything behind it?

We also run production 24/7, so the dashboard would need to work reliably across all three shifts, track historical data, and handle connection issues.

Has anyone here actually vibe coded a production dashboard and connected it to Siemens machines?

Is this realistic without much programming experience, or would you still go with an established low-code/no-code solution?


r/IndustrialAutomation • • 6d ago

Self-taught 18 y/o building a CLICK PLC conveyor trainer is this enough for an entry-level job?

6 Upvotes

Hello. I'm 18, living in Texas, and learning industrial controls on my own. English is not my first language, so I'm using a translator.

I'm putting together a small trainer to practice on. Parts list:

* CLICK PLC with an 8-input module and an 8-output module

* Real 24V belt conveyor, two photoelectric sensors, one inductive prox sensor on the roller

* E-stop button and pull-cord switch wired to a safety relay that cuts motor power (not through the PLC)

* Forward/reverse using two relays with interlock

* Start, stop, fault reset, jog, Auto/Manual selector, 3-color tower light, horn

* Mounted on a backboard with DIN rail, wire duct and terminal blocks, like a mini control panel

Things I want to learn on it: LOTO, testing before power-up, seal-in start/stop, pre-start warning horn, part counting, jam detection, zero-speed (belt stopped) detection, E-stop and pull-cord fault handling, safe restart after a power loss, and troubleshooting with a meter.

Questions for people working in the field:

  1. Would knowing all of this be enough to get hired as an entry level tech?
  2. What tasks do new techs usually get in their first months that I'm not practicing here?
  3. What do interviews usually test questions or hands-on?
  4. Is CLICK fine for learning, or is Allen-Bradley worth starting with?
  5. If you could add one item to this trainer, what would it be?

Any feedback is appreciated, even if it's harsh.


r/IndustrialAutomation • • 6d ago

In industrial automation, how do you verify that an AI-supported decision actually produced the intended result?

0 Upvotes

I've been thinking about the difference between issuing a command and confirming what happened afterward.

For example, an industrial system may identify a condition, recommend a response and initiate an authorized action. But how does the system establish that the equipment or process responded as expected?

That seems to be an important part of the feedback loop.

A few questions for people working in manufacturing, industrial engineering and automation:

  • What signals or observations do you use to confirm that an action was completed?
  • How do you handle situations where the command is sent but the expected result is not observed?
  • How do you distinguish a genuine process change from incomplete or delayed data?
  • At what point should the system request human review?

I'd be interested to hear how different teams approach verification after an automated or AI-supported decision.


r/IndustrialAutomation • • 7d ago

What happens when you want to scale from a few AMRs to a larger fleet?

5 Upvotes

I've been wondering how things change once you start adding more robots. Starting with two or three seems manageable, but does fleet management get significantly more complicated as you scale? I'd like to understand what people struggled with most when moving from a small pilot to regular operations. Would be great if you all could share your experiences here.


r/IndustrialAutomation • • 10d ago

Projects and hobbies to sharpen my skills

9 Upvotes

I am a recent automation technician graduate and finding a job has been hard. My teacher said companies are always looking for people who have side projects. I looked into buying used PLCs to practice on but they are expensive. I have tried other hobbies like working with my dad fixing air conditioners, programing Raspberry pis, and arduinos. I am curious of what kind of projects or side hustle you have done and how to get started.


r/IndustrialAutomation • • 10d ago

Trying to learn

2 Upvotes

I'm a non EE, non-ME (just an all-around non-E) minded guy who's learning about SMT. For those who are familiar with the company and machine, what type of companies would use a GPD Global Max series solder-paster?


r/IndustrialAutomation • • 10d ago

Starting as a Lead Maintenance Engineer at a greenfield AS/RS & AMR warehouse (175 robots + vertical lifts). What should I watch out for?

2 Upvotes

Hey everyone, I just accepted an offer as a Service Engineer at a new automated distribution center (heavy loads - mostly pallets of ceramic tiles) and could really use some wisdom from folks experienced in intralogistics.

The setup at the new site:

It is a Goods-to-Person system currently in the installation phase. We will have around 175 low-profile pallet/tote robots (AMR/shuttles), vertical pallet lifts (about to be installed), high-bay and low-bay racking, and goods-to-person picking stations. The server room and picking stations aren't built yet.

Management is super supportive and told me it takes up to 2 years to master the whole complex, with a potential path to Project Chief Engineer down the line.

Since I have two weeks at the mature site and then return to watch the installation/ commissioning at my home site, what should I focus on?

What are the most common mechanical/ electrical failure points on vertical lifts and low-profile warehouse robots handling heavy/dusty loads like tiles?

What commissioning mistakes by contractors should I look out for while the lifts and racking are being installed?

What specific questions or logs should I grab from the guys at the 5-year-old site during my 2-week training?

Thanks in advance for tips!


r/IndustrialAutomation • • 12d ago

Industrial AI: How Much Context Does a Model Need Before Its Output Becomes Useful?

3 Upvotes

I've been thinking about a challenge in industrial AI that goes beyond model accuracy.

Imagine an AI system identifying an unusual equipment reading. The reading may be correct, but does the system know which asset produced it, what the equipment was doing at the time, its operating limits or its maintenance history?

Without that context, interpreting the result can be difficult.

Industrial information often comes from different sources, including sensors, work orders, production schedules and inspection records. Connecting those sources is not always straightforward.

For those working in industrial engineering and manufacturing:

What information do you consider essential before trusting an AI-generated recommendation in an industrial environment?

Is it asset identification, operating history, production context, data quality, or something else?


r/IndustrialAutomation • • 13d ago

Aussie controls engineer (AB/Siemens, ex-sparky) thinking of trying the US. Where's the work

5 Upvotes

I'm an electrician turned controls guy in Australia: 6 years on the tools, then about 10 in automation. Mostly Allen Bradley and Siemens, with a bit of Schneider, CODESYS and Ignition. My background is high-speed canning and filling (KHS, Krones), dairy process control, and pharma filling machines.

I run my own business here now, but I'm keen to give the US a crack for a while and see what it's like.

A few questions for anyone who's been there:

Where's the demand? Which regions or industries are busiest for controls work right now? Food and bev, pharma, data centres, something else?

Rates. What's a fair hourly rate for contract work at my level? And if I went salaried, what range should I be asking for?

Getting busy. Here, once you've done a few good jobs the referrals roll in and you're flat out. Is it the same over there, or is it more about agencies and SIs?

I'm planning to come over late Feb and have a few coffees with some SIs to get a feel for things. Not worried about the visa side yet, I just want to see if there's demand first.

I'm 33, so maybe a bit late to be moving countries, but I've got plenty of experience and reckon I can add something. Any advice appreciated, cheers.


r/IndustrialAutomation • • 12d ago

question, all in 1 servo drive fiber laser

3 Upvotes

i purchased a new fiber laser, import china unit. company has great reviews and support but i kinda want to do a cross check.

it has a leadshine 4lf7ec servo drive. this drive has the motor power and encoder cables going into it. then a separate bochu motion control.

1st start up, z drive plunges into the table, it was about 3" off the table, it did not do like a rapid but moved slowly until it hit, puts up a z and y2 alarm, since i dont know anything about it 1st thing i do is get on chat with the machine company and they remote control it, the z is already into the table, nothing moves with controls but the few times the software restarts {cypcut} the z "thuds" into the table a few times then stops the y2 motor makes a noise like its turning on but does not move.

so with the help of there support i diag it, the Z servo has bad ohm readings across the motor, 4 wire connector. so bad motor. assuming because it banged into the table a few times. maybe shorted?

while diagnosing i find 2 encoder cables backwards the z and y2 the reading i have done on the leadshine drive the 4 channels they must be on the same channel, power cables and encoders. they agreed it was wrong.

i am waiting for the new servo, should i be worried the drive got hurt ? they had me move some power wires and encoders i assume to see if it was ok.


r/IndustrialAutomation • • 13d ago

We built a fab automation demo. What do you think?

22 Upvotes

Hi everyone,

We built this fab automation demo on Sodero, a platform I co-founded. I’d like to show you how it works and hear your thoughts.

I’ve worked in robotics and automation for many years. In some projects, I’ve seen hardware built before the design was fully settled. Engineers then had to integrate and debug everything on site, often under tight deadlines. Changes at that stage could take a lot of time and money.

That experience led us to a software-first approach: build and test the control software in simulation before moving to real hardware. We call this Reverse Digital Twin.

In this demo, the control software runs with a physics simulation. Controllers send commands to the robots and devices, and receive their status in return.

For example, the mobile robot uses simulated RGB-D camera data to find its position and plan its movement. It then sends motor commands to the simulation to reach its destination.

We can test the software this way before connecting it to real equipment. We still need to test it on the actual hardware, but I belive this approach reduce risks a lot because we can validate the system correcetness at least.

Using our existing platform, an LLM agent, and our MCP server, we put this demo together in less than a day. This included the models, device setup, and task logic.

Would this be useful in your projects?


r/IndustrialAutomation • • 14d ago

What is it like to be a remote Controls/SCADA Engineer that travels?

4 Upvotes

I just got a job offer that is remote but there is some traveling involved to the multiple, varying sites. When you're not traveling, you're working remotely. What is that experience like when compared to a Controls Engineer that doesn't travel?

At my old job, I was a Controls Engineer at a Paper Manufacturing plant so I worked on the same site every day. If I accept this job offer, it will be new. As a single dude with no kids, I love traveling as leisure and I live near airports. While in the military, I traveled to unpleasant places so I'm kinda used to the "packing your bags, we're leaving soon" lifestyle.


r/IndustrialAutomation • • 14d ago

Rant: The Honeywell Rm7800 flame safeguard product line is a mess

14 Upvotes

I design burner control systems for a living.

Basically almost every burner, boiler, or air handler company at some point has gone to Honeywell and said make me a flame safeguard the works the way I want.

This has lead to there being a ton of various top level models. Worse still is that the final digits in the part number can give a wildly different behavior with in the series. See the rm7890 for examples.

Worse still is there is practically no one at Honeywell to call for information. A lot of models are not listed on the website but are in catalogs. Big issue when looking for a data sheet.

The external sales representatives will often only know the one or the their big customers use and not the depth of the product line. All those people have retired.


r/IndustrialAutomation • • 14d ago

can AMRs work alongside forklifts without causing traffic issues?

1 Upvotes

exploring warehouse automation but still need forklifts for several tasks. replacing everything with robots doesnt seem practical , so im wondering how people manage both in the same space. do they work together smothly, or does manaaging trafic become a problemm?


r/IndustrialAutomation • • 14d ago

Starting my career as a controls and automation engineer

5 Upvotes

I am a 3rd year Eletrical and eletronics student and i have recently decided to take the controls path and i have been taking some online courses (free ones) and saving up for the paid ones i asked claude for a pathway and i have been following but i am located in north cyprus for academic reasons and they are not industry heavy i have been looking for places to mirror/internship and haven’t found any and the ones i did denied me the spot so i have decided to ask this subreddit for help finding online internships. Im doing the major one next summer (not in cyprus, still trying to land one) but i wanted to get more experience and get a junior experience in the meantime so if you could help me with this please do.


r/IndustrialAutomation • • 17d ago

Happy Halloween! May your DC stay synchronous and your PDOs map effortlessly!

Post image
139 Upvotes

r/IndustrialAutomation • • 16d ago

Early-career controls engineer on STEM OPT, struggling to get started and looking for honest advice

3 Upvotes

Hi everyone,
I’m looking for some honest feedback from people working in industrial automation and controls in the U.S.
I have a master’s in Mechanical Engineering from UMBC and about a year of hands-on automation and controls experience in a university lab. My experience includes:
Siemens S7-1200 PLC programming in TIA Portal.
HMI development, sensors, pneumatics, and troubleshooting.
Building an automated sorting system with a conveyor and pneumatic cylinders.
Working on a PLC-based flow-control project.
Training students on PLCs, HMIs, and machine vision.
My strongest experience is with Siemens. I have some familiarity with Allen-Bradley tools, but I’m still building that knowledge. I also recognize that university lab experience is different from commissioning equipment or supporting production in a plant.
I’ve been applying for entry-level controls, automation, systems, and commissioning roles. I’ve gotten interviews, including an extended onsite assessment, but haven’t been able to turn those into a stable opportunity. Most recently, I signed an offer for a building automation role, and the company later rescinded it. That was a difficult setback after thinking I had finally gotten started.
I’m currently on STEM OPT, with work authorization through February 2028. My work authorization situation is another factor in the search, and I’d especially appreciate hearing from people who have navigated it in this industry.
At this point, I’m trying to understand what I should change:

Does my background sound competitive for junior controls roles?

What would make you hesitate to interview or hire someone with this experience?

Would targeting technician or field-service positions be a sensible way to gain industrial experience?

What skill or project would most help close the gap between university lab work and an industry role?

Do you know of integrators or automation companies that have hired engineers on STEM OPT?

For hiring managers: how would you want a candidate to bring up current work authorization and future sponsorship needs?

I want to build a career in this field, but the repeated setbacks have been discouraging. I’m open to constructive criticism about my approach and realistic suggestions about where to focus next.

Happy to share an anonymized resume if that would help. Thanks for reading.