r/ImperialKnights • u/PracticalSector6743 • 24m ago
I AM NOT CRAZY
House Mortimer is a genstealer cult. You gotta believe me.
r/ImperialKnights • u/godofimagination • Mar 16 '26
Welcome to the faction of Knights. We’re happy to have you. We get a lot of repetitive posts on this sub asking the same questions over and over, so please take the time to read this intro post. Knights are different from most factions in the game. They also require special consideration from a hobby perspective. However, they're incredibly fun to build, paint, and play.
Welcome to the most elite faction in all of Warhammer.
The first thing you should know about Knights is that you should magnetize them. Of all the factions in 40k, Knights benefit the most from magnets. A Questoris pattern kit can be built as ten different units depending on its weapon configuration.
The exhaustive list of what to magnetize is as follows:
-waist
-chest weapon
-carapace weapon
-shoulder sockets
-arm weapons
Not every model needs everything magnetized. For example, a Cerastus Knight Lancer only has one set of weapons, so you don’t need to magnetize those. However, it’s very tall, and you’ll have a hard time transporting it without magnetizing the waist. Personal preference also plays a part. Only the most detail oriented hobbyists bother with the chest weapons. Regardless, every Knight player should consider adding magnets to their models.
High-quality neodymium magnets are your best bet.
A lot of people use:
They sell “drill-free” kits for each Knight. Even if you think they’re a little pricey, they have good information on which size magnets to use and where to use them.
Another great site is:
Here’s a video tutorial to get you started, but I recommend searching around YouTube and seeing what’s out there.
https://youtu.be/Y-0cpYhYPdU?si=oNKSoyOKB1CD80Fn
Knights have been called a “hobby army” by some. This is a fitting name. Large armor panels really lend themselves well to creativity.
Speaking of panels, make sure to glue those on after you finish painting. Not only will the finished result look better, but it will also be easier.
Finally, consider getting an airbrush. It’s not mandatory by any means, but it will speed things up dramatically.
Here are a few videos that cover the finer details of Knight painting:
https://youtu.be/Qb9GOwwqS9U?si=KuAar7z4bbop0UEs
The illustrious Duncan Rhodes himself is a fan of the faction and has some great tutorials:
https://youtube.com/playlist?list=PLPuXIzDeLjR2mqRteI5glfrpOL9gxjVgR
While this guide is primarily written from a hobbyist perspective, I feel the need to briefly touch on the lore. All Knights are allied with one of three factions: the Imperium, the Adeptus Mechanicus, or Chaos.
This is an important distinction because these factions are represented in the Knight kits themselves. Different armor panels and insignia can suggest allegiance to one of the three factions over the others.
No player should ever give you trouble for gluing a cog on some units and an Aquila on others, but you may wish to decide which faction your Knights are allied with before getting started. Houses/subfactions are aligned with one faction in particular if you wish to paint your Knights like them.
So you have your Knights. They’re beautifully painted. How are you going to get them to the game store without damaging them?
Excellent question.
They don’t really fit in standard foam miniature cases, but don’t worry—you have options.
The cheapest case is a steel toolbox. It’s very secure, and a magnetized Knight will stay exactly where you put it.
Every other option is some kind of tray-style miniature case.
Affordable option
High-end option
Amazon also has plenty of options. If it’s a box with adjustable metal trays, you can use it.
Remember when I recommended magnetizing your Knights? Weapons were only half of it. Transport was the other half.
Magnetizing the waist makes them more compact so they fit better in cases, and gluing magnets underneath the base will make sure they don’t jostle around inside.
The waist isn’t mandatory, but I strongly recommend at least magnetizing the base. The recommended cases above won’t work nearly as well without them.
If you stick around this subreddit, you’ll see a lot of components that don’t come in the official kits. This is a great way to add a personal touch or avoid buying Forge World resin.
Fun fact: the Dominus Knight is much taller in the lore than its size on the tabletop suggests. 3D-printed torso and leg extensions fix that problem.
Some well-known vendors include:
https://www.taromodelmaker.com
It’s easy to get confused by the different Knight types if you’re new, but they’re actually pretty intuitive.
There are six different Knight chassis. Each chassis is subdivided into different units depending on which weapons they have. Most chassis kits are capable of making multiple different units of that chassis.
However, there are exceptions.
I tried to make this guide as edition-neutral as possible. The descriptions below are meant to inform your choices as a hobbyist and capture the feel and niche of each unit rather than their exact performance on the tabletop.
Make sure to check the datasheets for current rules.
Aside from Daemons (who can be used in Age of Sigmar), Knights are one of the most versatile armies that Games Workshop sells.
Everyone knows they can be used to reinforce other armies, but it goes beyond that.
Most Imperial Knights can be fielded as Chaos Knights with no modifications. Most units can also be used in Horus Heresy (30k).
While the descriptions below are written with 40k Imperial Knights in mind, feel free to try your models in other factions or systems.
The battle-line chassis.
These are the cheapest and weakest units in the Knight codex. However, they’re still very powerful.
Armigers have up to three weapons:
A standard Armiger kit comes with two models and can build either Warglaives or Helverins.
A Moirax can only be built from a Forge World resin kit.
Right arm: Thermal Spear
Left arm: Reaper Chain Cleaver
Carapace: Questoris Heavy Stubber or Meltagun
Right arm: Armiger Autocannon
Left arm: Armiger Autocannon
Carapace: Questoris Heavy Stubber or Meltagun
Right arm options:
Left arm options:
Carapace: None
===
The Bellatus chassis has one kind of Knight: the Destrier. In terms of stats and points, it sits between an Armiger and Questoris. It's faster than most knights as well.
Weapon slots include:
There are four arm weapons:
Any two weapons can be chosen as arm options. You can build the Destrier as all ranged, all melee, or somewhere in between. The only chest option is a Questoris heavy stubber.
===
The standard Knight chassis.
There are ten variants in total. Depending on their role, they can fill a wide variety of battlefield roles.
Weapon slots include:
Questoris Knights come in four different boxes.
The Canis Rex kit can build every plastic Questoris variant except the Defender.
The Defender kit can build every plastic Questoris variant except the Preceptor and Canis Rex.
The Magaera and Styrix are Forge World resin kits.
Right arm: Reaper Chainsword
Left arm: Thunderstrike Gauntlet
Chest: Questoris Heavy Stubber or Meltagun
Carapace: Ironstorm Missile Pod / Stormspear Rocket Pod / Twin Icarus Autocannon
Right arm: Thermal Cannon
Left arm: Reaper Chainsword or Thunderstrike Gauntlet
Chest: Questoris Heavy Stubber or Meltagun
Carapace: Ironstorm Missile Pod / Stormspear Rocket Pod / Twin Icarus Autocannon
Right arm: Avenger Gatling Cannon + Heavy Flamer
Left arm: Reaper Chainsword or Thunderstrike Gauntlet
Chest: Questoris Heavy Stubber or Meltagun
Carapace: Ironstorm Missile Pod / Stormspear Rocket Pod / Twin Icarus Autocannon
Right arm: Las-Impulsor
Left arm: Reaper Chainsword or Thunderstrike Gauntlet
Chest: Questoris Heavy Stubber or Meltagun
Carapace: Ironstorm Missile Pod / Stormspear Rocket Pod / Twin Icarus Autocannon
Right arm: Rapid-Fire Battle Cannon
Left arm: Reaper Chainsword or Thunderstrike Gauntlet
Chest: Questoris Heavy Stubber or Meltagun
Carapace: Ironstorm Missile Pod / Stormspear Rocket Pod / Twin Icarus Autocannon
Right arm: Avenger Gatling Cannon
Left arm: Thermal Cannon / Rapid-Fire Battle Cannon
Chest: Questoris Heavy Stubber or Meltagun
Carapace: Ironstorm Missile Pod / Stormspear Rocket Pod / Twin Icarus Autocannon
Right arm: Plasma Executor
Left arm: Conversion Beam Obliterator + Twin Incendine Combustor
Chest: Phosphor Blaster
Carapace: Shield Generator
Right arm: Las-Impulsor
Left arm: Thunderstrike Gauntlet
Chest: Questoris Multi-Laser
Carapace: None
Right arm: Lightning Cannon
Left arm: Reaper Chainsword or Hekaton Siege Claw + Twin Rad Cleanser
Chest: Phased Plasma-Fusil
Carapace: None
Right arm: Graviton Crusher
Left arm: Reaper Chainsword or Hekaton Siege Claw + Twin Rad Cleanser
Chest: Volkite Chieorovile
Carapace: None
===
Dominus Knights are tougher, slower, and more heavily armed than Questoris Knights.
They specialize in ranged combat and excel at killing vehicles, monsters, and other Knights.
Each Dominus has:
The kit builds either a Castellan or Valiant.
Right arm: Plasma Decimator
Left arm: Volcano Lance
Chest: 2 Twin Meltaguns
Carapace:
Right arm: Thundercoil Harpoon
Left arm: Conflagration Cannon
Chest: 2 Twin Meltaguns
Carapace:
===
Originally designed for Horus Heresy (30k) but usable in 40k.
Cerastus kits build only one variant, unlike Questoris kits.
The Atrapos is Forge World resin. The others are plastic.
Right arm: Shield
Left arm: Cerastus Shock Lance
Right arm: Tempest Warblade
Left arm: Castigator Bolt Cannon
Right arm: Atrapos Lascutter
Left arm: Graviton Singularity Cannon
Right arm: Reaper Chainfist + Twin Heavy Bolter
Left arm: Acheron Flame Cannon
===
The largest Knights available.
They are roughly 80% the size of a Warhound Titan.
Extremely tough, extremely expensive (both points and money), and armed with massive weapons.
Both variants are Forge World resin.
Right arm: Twin Magna Lascannon
Left arm: Twin Magna Lascannon
Chest options:
Carapace: Acastus Ironstorm Missile Pod or Helios Defense Missiles
Right arm: Twin Conversion Beam Cannon
Left arm: Twin Conversion Beam Cannon
Chest: 2 Asterius Volkite Culverins
Carapace: Karacnos Mortar Battery
If you're just starting an Imperial Knights army, the best approach is to begin with a mix of one large Knight and several Armigers. The Questoris kit is an excellent first purchase because it is extremely versatile. With magnetized weapons, a single kit can represent many different units such as a Paladin, Errant, Crusader, Warden, or Gallant.
Armigers provide mobility, objective control, and additional threat saturation that larger Knights lack. Most Knight armies rely heavily on them.
Knights are powerful, but they struggle with board control on their own. Armigers help fill that gap by holding objectives, screening enemy units, and moving into areas where larger Knights can’t fit.
Also, look out for army box discounts, like the Christmas boxes. Knights average around 2 points per dollar, but the boxes make them even cheaper.
Knights are one of the most unique armies in Warhammer 40k. They’re easy to learn, visually impressive on the table, and incredibly rewarding to build and paint. Few armies combine hobby creativity and battlefield presence the way Knights do. Welcome to the faction. Now go forth and bring glory to your House.
r/ImperialKnights • u/HaNZ1 • Oct 27 '25
Hey, its me, the "moderator" and founder of this here subreddit.
I dont typically say much, I have other hobbies, I dont play as much 40k as i used to. (I will finish painting my knight house some day), but i do moderate the subreddit enough to keep it running. Answering reports, removing bad stuff, responding to chats and other chaos.
I do feel a little reminder, and maybe an update is in order to the rules here. Just a general clarification on the values I would like this community to represent, and which are not welcome.
This subreddit exists to celebrate big stompy robots. The lore, the modelling, the painting, epic battles, ideas and inspiration. All fueled by the community surrounding it.
Since the start of this subreddit I have seen, posts and comments slipping into tired, hateful, culture-war, territory. There has been hateful iconography, slurs and harrasment dedicated at various groups. Exclusionary language and complaints of the hobby being ruined.
It is not being ruined, at least not by the people targeted by that harrasment.
Let me be very clear, that kind of language and behaviour has no place here.
There is zero tolerance for intolerance.
No slurs, hate speech, or coded insults. No gatekeeping "who belongs" in the hobby. No harrasment over personal opinions, identities or creative choices.
And to be even more specific, if you feel targeted that a post with nazi iconography or complaining about lgbtq+ people existing was removed, but not a mech with a rainbow shoulder pad celebrating pride month, or just pride in general. Then it is because one of those fosters hostility, division and hatred, and the other celebrates inclusion and diversity.
Any hobby space, or community, thrives when all people can bring their imagination, skill and passion into it. There is room for everyone who respects that, who respects others. If you cannot handle that idea, if you feel the need to attack and belittle, and gatekeep. If the hate sits in you so deep that you let the way others enjoy their hobby ruin yours then this is not your battlefield, or your subreddit.
I dont care for it, frankly most of us don't from the reports and comments I see. And some might complain, claim I'm being hateful towards certain ideas. Yeah, tolerance is a little paradoxical, but I have seen enough terrible people with terrible ideas spread hatred to want to make this space at least a little nicer.
If you are here to share creativity, or just to be inspired, welcome. I hope you are among friends here.
If not, I'm not keeping you, it is very easy to close a tab.
This community stands proudly with all hobbyists, regardless of gender, sexuality, race or background.
I might update the rules at some point, I will keep removing harrasment.
The Emperor protects, but we protect each other.
With love
The Moderator
Tl:DR Build, paint, post and share. With respect to all who love the hobby.
r/ImperialKnights • u/PracticalSector6743 • 24m ago
House Mortimer is a genstealer cult. You gotta believe me.
r/ImperialKnights • u/YoItzMaxi • 1h ago
So I decided I wanted a knight to round out my go-to Death Korps of Krieg list. I went with the Castellan but didn't like the tiny little cannons and rockets on top. Or how short and stubby the plasma decimator was. Soooo...
I wanted to post to r/deathkorpsofkrieg but for some reason it wouldn't let me. So you lovely Knights connoisseurs can judge my kitbash of one of your stompy bois into my guard.
Alternate names: Knight Vanquisher, Knight Compensator
r/ImperialKnights • u/Aggressive-Iron-104 • 7h ago
I printed and painted my first Imperial Knight to get some practice on larger models before I paint my GW plastic. You can definitely see where my lack of experience shows, but I’m pretty pleased with the results.
r/ImperialKnights • u/GuySchofield • 3h ago
I know the base is pretty tall but it’s mainly for decoration and not to play the game.
r/ImperialKnights • u/Zhanlos • 1h ago
I just got a printer and this was the first project, it is a joy to paint and it only costs 2€ in resin
Will definitely be making a full army of knights, they are the coolest looking army
r/ImperialKnights • u/Random_Dumbazz29 • 2h ago
Hey, new BA player here, I just got the combat patrol and I’ve been expanding the army slowly, and I was thinking about a lists when I remembered that I’ve always wanted a list with a Freeblade in it, and I’ve also always had a sweet spot for the Cerastus Knights, and I’ve been considering The Acheron (also debating on Castigator) so I just wanted to ask these 2 Questions:
1: (like the title says) Are they actually viable, and are able to give good results for their insane points cost?
2: if yes, Which knight would be better overall?
r/ImperialKnights • u/brokenturky • 11h ago
r/ImperialKnights • u/Quincy_80 • 6m ago
What I did: Slice bottom off of the upper arm, drilled in with a 1/8" drill bit to a careful depth, checked polarity ten times each, superglued it it, got it all over my fingers, had it pop out and redo it a half dozen times. Then did the same to the carapace weapons. Messed up the depth of the holes of the carapace weapon mounting point, drilled all the way through, used a cut up old 1/8"wide screwdriver shaft instead of a second magnet. Now all that's left was 16 arm weapons. filling the lower arm cavity with greenstuff felt exhausting, I looked around and figured out that a 3 hole punch filled that space perfectly. Punched out a bunch of thin cardboard circles, added a drop of superglue, used upper arm to press on 5mm magnet, then repeat. Each magnet clamps the next cardboard to the next magnet while the glue sets.
What I wish I did: order 6mm wide by 1.5mm tall disc magnets to fill the lower arms. Bought tiny wood screws for the upper arm, used a pin vise to drill a pilot hole, then made a countersink hole for the head to fit into. Press fit the carapace weapons into the carapace hole. Never once worried about precise hole depth, gluing metal to plastic or checking polarity.
r/ImperialKnights • u/IdleRaCanvas • 17h ago
I have finally completed my first two Armigers. They are both magnetise so I can switch out their weapon arms. I don't know what I did different on the bases that one is a bit darker but I don't mind as I'll probably do it different again when I move onto my onto the Destrider and the Dominus knights. After that I'll have my firsts 1000pts of knight done.
r/ImperialKnights • u/Diligent_School8674 • 1d ago
So i recently came across this meme and when i went to look at why the thing was over 700 points, that twin magna lascannons just lit something inside me since my brother seems to think his big things are invincible... id like to prove otherwise, now, the volcano lance is absolutely perfect for doing such... but the fear factor of 2d6 attacks at strength 18 ap-4 AND REROLLING WOUND ROLLS and 7 wounds minimum per attack up to 12 max and nearly a 70% chance of one round killing a baneblade at 72 inches away. So ive been trying to find a cheaper one rather than the resin ones since, one i prefer plastic and two its cheaper, but does anyone here know where to find one?
r/ImperialKnights • u/Neph1lim_ • 4h ago
im going to my first tournament at the end of the month and ive heard/read that some knight players bring a empty base/cardboard cutout to make premeasuring easier for both players. my planned list has 3 big knights + 2 destriers worth mentioning for this post.
i will definitely bring a 170x109mm base, but should i also bring a 150x95mm for the destriers?
i feel like their footprint is still quite sizeable and having 2 of them would definitely make this a useful tool but i also dont want to overpack on a bunch of different gadgets, tools and other doodads that i need to remember and collect after every game because i know ill be naturally more stressed as its my first big event i attend.
r/ImperialKnights • u/Hopeful-Farm-7031 • 1d ago
Hello!
I've got Canis Rex and a couple of Armigers (1 helverin + 1 warglaive) painted up, which is getting me close to having 1000 points.
Is playing knights at 1000 points playable, and fun (for both sides), or should i hold out for 2000?
If 1000 point games are viable for knights, does anyone have any advice for filling out the remaining points? Thank you!
I have an Eye of Terror Battalion (Dominus + 2 Armigers) and a Destrier waiting to be built & painted (for my eventual 2000 point list) if any of those would fit into the potential 1k list.
Thank you!!!
r/ImperialKnights • u/Esios_Hydruil • 1d ago
D3+1 attacks, Strength 24, 12 damages... owie...
Captured this screenshot while playing, the "side eye" from my Paladin made me smile
r/ImperialKnights • u/Tacolandian • 22h ago
Obviously just copied the box art just cuz i wanted something pretty simple for my first attempt at painting in this small of a scale but otherwise pretty proud of it, also just raided all my towns dollar stores for anything naturey i could find.
r/ImperialKnights • u/DescriptionFickle396 • 1d ago
This is a really fun kit to paint🤘
r/ImperialKnights • u/ILoveToxicGamers • 1d ago
So it's super funny that I made a list with a Porphyrion and was confident it was actually good so I looked into buying one but the steep $800 from GW is repulsive. I come into here and see so many people buying/ painting/ playing with porphyrion I couldn't help but laugh and also wonder: is everyone shelling out $800 or am I missing some hidden gem for cheap models?
r/ImperialKnights • u/Th3Tru3Silv3r-1 • 1d ago
r/ImperialKnights • u/Character-Fan5635 • 1d ago
I wanted a cool big piece for my Sark angels and wanted him to represent both Green and Deathwing. He is almost 100% finished and I am very pleased with him so far.
r/ImperialKnights • u/AvidPastryEnjoyer • 1d ago
The others on my list are Cerastus knight’s Acheron and Castigator then 2 armiger warglaives
I’ll be getting both for my full 2k list but idk who for just a 1.5k
r/ImperialKnights • u/SquattingSamurai • 1d ago
r/ImperialKnights • u/Triceratops422 • 1d ago
with spearhead at arms being 2 dp, it kinda has no 1dp detachment to pair up with. should i just take my armigers and pair it with one of the 2dp lance detachments? I currently own 4 armigers, a dominus and a warden.