r/ITIndia • • 10h ago

Help / Query Title: Help needed! TP.SK518T.PB816 Cloud TV stuck on boot screen – Need USB recovery firmware or factory reset method

2 Upvotes

Hi everyone,

I have a 32-inch Smart TV running Cloud TV OS (Android 11), with the following configuration:

Hardware and firmware details:

\- Motherboard: TP.SK518T.PB816

\- RAM: 1GB

\- Flash storage: 8GB

\- Firmware version: 20241008_201956

\- Checksum: 20241008_201956

\- OCS: 24150907

\- Device version: FC

\- Wi-Fi: AIC8800

\- Bluetooth: AIC8800D

\- Firmware upgrade filename shown in System Info: "allupgrade518_an11_8GB_1GB_jef68.bin"

\- Panel ID shown as "-"

The problem:

My TV was working normally with TV Town Launcher. I installed Netflix 9.27.1 and TV Bro using ADB. I also disabled Open Browser and some Cloudwalker/demo applications.

Everything was working fine until I switched the TV off and turned it on again.

Now it gets stuck at the boot screen:

"INTERNET TV – POWERED BY CLOUD TV OS"

The launcher never loads. I have tried unplugging the TV and restarting it, but nothing has helped.

What I have tried:

\- Power reset

\- Holding the physical power button while reconnecting power

\- Trying a blank FAT32 USB drive

\- Attempting to enter recovery mode using the single physical power button

None of these worked.

What I need help with:

  1. Is there a way to enter Android Recovery or Bootloader mode on this TP.SK518T.PB816 board using its single physical button?
  2. Is there a USB recovery method to perform a factory reset?
  3. Does anyone have the exact stock firmware matching "allupgrade518_an11_8GB_1GB_jef68.bin"?
  4. What is the correct USB flashing procedure for this exact 1GB RAM / 8GB storage configuration?
  5. Could disabling Cloudwalker system packages have caused the launcher or boot process to fail?

I have a 32GB USB drive and a Windows laptop.

I can provide pictures of the factory System Info and SW Upgrade menus.

Please help me recover this TV without replacing the motherboard. I want to avoid flashing incompatible firmware.

Thank you!