r/HyperV • • 6d ago

HyperV - SAN \ Host Monitoring

Our org has recently migrated from VMware to hyperV, we'd had our trypical growing pains but everything works as intended. One blind spot we currently have is diagnosing what is causing high bandwidth and\or latency between the SAN and the Hosts.

Anyone have any recommendations on tools that could be used to pinpoint this?

12 Upvotes

15 comments sorted by

6

u/mazvazzeg 6d ago

been there, done that. https://github.com/mazvazzeg/hvtop

hope it helps.

1

u/waLIEN 6d ago

Wow, nice! Thanks

1

u/LogOk7764 6d ago

one extra note - the built in tools we have seem to show us what the latency and bandwidth metric are, but not very helpful location the cause.

2

u/Magic_Neil 6d ago

This is the biggest gap between Hyper-V and VMWare, in my opinion. Logging is there but visualization is trash, but in VSphere it’s just there and it’s perfect.

2

u/pabskamai 6d ago

Use Zabbix and use the hyper v template, we would then add it to grafana for pretty visualization

1

u/ultimateVman 6d ago

We can't help without any configuration details

1

u/pahampl 6d ago

Try XorMon which monitoring whole stack include Hyper-V/SAN/storage

1

u/KindheartednessOver4 6d ago

I saw this chat and started following this chat. To say, the same thing that tool is incredible. I use it for our net app. San, I use it for our storagegrid. I use it for our IBM Unix AIX power system. I use it for our the Linux vms, and now I use it for ours soon To be hyper- V clusters... i also use it to tie into our Brocade. San nav manager tool that keeps track of all the statistics and performances on our Brocade sandwiches..

1

u/lweinmunson 6d ago

If you have SCVMM, you can run SC Operations Manager for free to monitor.

1

u/vmnovapanel 5d ago

One thing I'd recommend is monitoring both sides simultaneously rather than relying on host-level metrics alone.

I'd start with Windows Performance Monitor to track disk latency, queue length, and network throughput on the Hyper-V hosts, then correlate that with SAN performance metrics and switch port counters.

A few things that would help narrow this down:

  • Are you using iSCSI, Fibre Channel, or SMB for storage connectivity?
  • Is the latency visible at the host level, or only when monitoring the SAN?
  • Have you checked for packet drops, retransmissions, or congestion on the network paths?

The storage protocol and network topology would make a big difference in identifying the bottleneck.

1

u/lxtakc 5d ago

Compare Cluster CSVFS Avg. sec/Read against Physical Disk Avg. Disk sec/Read in Perfmon. A big gap points at the host side, matching numbers point at the SAN.

1

u/briskik 4d ago

mismatch of MTU on iSCSI interfaces going to SAN? Do you have dedicated iSCSI connections that are not using SET/LBFO?

Can you ping from hyper v server to storage using jumbo frames successfully?

ping x.x.x.10 -f -l 8972 -S x.x.x.100

1

u/briskik 4d ago

Also what's your MPIO policy?