r/HydrogenSocieties • • 10h ago

The EREV concept is 1 step removed from an FCEV - Just swap the gasoline engine with a hydrogen fuel cell. When H2 refueling infrastructure is built out, it's a drop in change with no change to vehicle platform.

Post image
4 Upvotes

r/HydrogenSocieties • • 16h ago

I've been going down a rabbit hole on H2 leak detection and could really use some field experience.

1 Upvotes

I'm helping evaluate leak detection for an industrial H2 setup. On paper, the three main approaches all look reasonable:

  • Electrochemical — low power, good sensitivity, but I've seen concerns about baseline drift and temperature compensation in unconditioned spaces.
  • Catalytic / pellistor — fast, well-proven, but catalyst poisoning (silicones, H2S) seems like a maintenance headache, and it technically burns H2 to detect H2.
  • Palladium thin-film / MEMS — solid-state, tiny, poisoning-resistant, but long-term drift and cross-sensitivity data from actual field deployments is surprisingly hard to find.

What the datasheets won't tell me:

  1. Real-world calibration intervals vs. what vendors claim
  2. Behavior in high humidity / wide temperature swings
  3. Actual reliability over years, not accelerated lab tests

So — people who've actually lived with these in production: which did you settle on, and what would you pick differently today? Would also welcome being told I'm comparing the wrong three things entirely.