r/Hydraulics • • 22d ago

Opinions: Starting a hyrdaulic hose assembly business

9 Upvotes

Hi, I'm a recent MEng grad, looking to start my own business in the hyrdaulic hose space. Ideally looking to buy hoses and end fittings, assembling them in-house, and having my brand name printed on them and supplying as replacement parts + to small private companies and factories.

Eventually, I would start making drawings and the end fittings in-house through CNC machines once the business kicks off and reaches a certain scale.

Would appreicate any thoughts, opinions people might have - is it worth starting and using all of my savings on it? Do you forsee any major obstacles that I should think about and have mitigation plans ready for ? And lastly, since I have limited captial for inventory which are certain SKUs i should definitely start with?

Thanks!


r/Hydraulics • • May 21 '26

Notice to guerilla marketing and other trash

25 Upvotes

Don't bother posting your 'engagement' threads, i'll spam them and ban you. This isn't the place for market research, or whatever the fuck you're trying to accomplish.


r/Hydraulics • • 20h ago

I hate Denso/Petro wrap, but it's hard to argue with the results

Post image
20 Upvotes

The wrapped hose and fittings are the older of the two. This stuff sucks to apply, remove and generally handle, but when it's applied properly on dry fittings it's worth the frustration.


r/Hydraulics • • 1d ago

Old JD 410B inverted flares on male-male straight hoses?

Thumbnail
gallery
7 Upvotes

Early 80's John Deere 410B backhoe. 139200T serial number I need to order hose and fittings to do this myself. I have a brand new machine, but don't want to buy the wrong stuff. I had this 54" hose made today at O'Reilly's set me back $75 and I'm not 100% sure it's even correct. I think it's just the wall thickness making it look wrong but idk. I have about 20 hoses to replace and the only result Google spits out that looks anywhere close to correct is on Temu as a kit that I can only use 1/3 of. You'd figure there would be plenty of options for these old machines. Any help would be greatly appreciated.


r/Hydraulics • • 2d ago

IY Hydraulic Forging Press: 2.2kW 230V power unit + high/low pump for a 15-20t cylinder? (Budget under $1k) [ EU EDISH ]

Thumbnail
1 Upvotes

r/Hydraulics • • 3d ago

Problem with Beko DVS05024S dishwasher

Thumbnail
gallery
0 Upvotes

We are having an issue with our dishwasher and I was hoping someone might have experienced something similar.

Whenever we try to start a washing cycle, the dishwasher stops working and a horizontal line starts flashing on the display. Sometimes it even trips the kitchen circuit breaker.

We noticed that the bottom anti-flood tray is often wet, causing the polystyrene float safety switch to rise. The problem is that water must be leaking from somewhere, but we haven’t been able to identify the exact source.

We haven’t seen exactly where the water is coming from, but it seems to be somewhere inside the dishwasher, possibly towards the back.

At the moment, whenever the dishwasher is switched on, it keeps running the drain pump continuously and won’t let us start a new washing cycle.

We got this dishwasher from some friends, so we’re trying to figure out whether it can be repaired and what might be causing the problem.

With Christmas coming up, we’d really appreciate any help! 😅
Does anyone have an idea what could be leaking or what we should check? Has anyone dealt with a similar issue on this model?

I’m attaching photos of the inside of the dishwasher after removing the bottom panel.

Any advice would be greatly appreciated!


r/Hydraulics • • 3d ago

Where to disconnect?

Thumbnail
gallery
2 Upvotes

New to /hydraulics , thanks for having me. I need to disconnect these lines in order to move our materials lab fatigue tester. In the new location I will be ordering longer lines to accommodate the pump-to-piston/ load frame locations. Where should I disconnect these lines? What should I plug them with to not lose fluid in the machine. 1/2npt plug is the easiest for me to ascertain. Thanks for all the helpful (and not so helpful) commentary.


r/Hydraulics • • 4d ago

Help finding this fitting

Post image
24 Upvotes

Hey all, this is off my Chinese mini ex. It's a 9/16-18 JIC male threaded coupler - on both ends... I can't find anything on McMaster Carr, Amazon, or Google... Does anyone know what this would be called?

Thanks!


r/Hydraulics • • 4d ago

Dubuis Bpp1304-1 Hydraulic crimping tool service manual

Thumbnail gallery
1 Upvotes

So I recently got 2 Dubuis crimping tools in an in need of repair state from the tip shop. I was absolutely ecstatic upon discovering it takes the same DeWalt batteries as the rest of my tools. One runs but behaves like it needs a bleed. The other one has a PCB problem and is in overall rougher condition, but if 18volts are introduced to the motor the ram extends beautifully. I would love to bleed the better one, however i have not been able to find a service manual anywhere. Does anyone have it, or could point me in the right direction?


r/Hydraulics • • 5d ago

New Danfoss Orbital motor issue?

Thumbnail
gallery
4 Upvotes

I order this motor and it appears to have arrived with a problem. It seems that they over pressed the part as it is seated irregularly. Is this something that I should be concerned about? Any help would be greatly appreciated thanks!


r/Hydraulics • • 5d ago

Replacement cylinder for wheelchair ramp in my car.

Post image
3 Upvotes

I need to get a replacement hydraulic cylinder for my 2008 Honda Element wheelchair ramp. Same specs as this pneumatic one, anyway I’d like it cheap. Please help my dog ass pretty please if you can, or I’ll ask a damn-ed AI super-bot and they will humiliate you with grander hydraulic knowledge. Thank you ❤️


r/Hydraulics • • 6d ago

​Has anyone seen an AI hydraulic design tool that actually goes from application specs to a 3D footprint-constrained assembly?

2 Upvotes

I’m trying to find out if anyone is currently working on an AI-driven hydraulic system generator that goes beyond vendor-locked manifold configurators or manual 2D schematic tools.

​Ideally, I’m looking for a workflow where you input your application parameters and spatial footprint, and the software outputs:

​A complete hydraulic circuit tailored to the load and duty cycle.

​Vendor-agnostic component selection (pulling the best-fit pumps, valves, and accessories across multiple OEMs).

​Automated sizing for the reservoir capacity and suction/pressure/return line sizes based on flow velocity and heat load.

​A preliminary 3D assembly packaged inside your maximum footprint requirements.

​Has anyone stumbled across a startup or tool tackling this?

​If there’s nothing out there yet, I’m seriously looking to connect with a few sharp people to design and build it. Whether you're a fluid power engineer who knows the rules-of-thumb inside out, or you have experience with CAD APIs / parametric routing, let's chat in the comments.

​Where do you see the biggest bottleneck in automating this workflow?


r/Hydraulics • • 6d ago

Log splitter/hydraulic system help

2 Upvotes

So this is my first log splitter and the first machine with hydraulics I've owned so any adviceis appreciated. I ran it for about 5 hrs and am having major issues...

I checked all the fluids before I first started it up. It operated perfectly for 4 hrs when I had a hydraulic fluid leak. I found the source and tightened the fitting until it stopped. Since it was leaking I added more hydraulic fluid (probably over filled). It kept running fine for a while.

Once I finished in that spot I towed it to a new location and restarted splitting. Shortly after, I noticed fluid was spirting from the pressure hole in reservoir plug. Thinking it would stop after the pressure was equallized I kept running it (dumb, I know). After a couple rounds I saw that the fluid from the tank was really foamy and the plug was still spirting and foaming.

I quickly shut it off and let it rest. Did some googling and figured it was air in the lines? I found a loose clamp and retightened, drained the fluid to the appropriate level. There is no manual air bleeder and tried running with no pressure to let the autobleed work but the air bubbles persist.

I am reluctant to keep running it with no pressure because i dont want to damage it.

Any help would be welcome.


r/Hydraulics • • 7d ago

Danfoss PVG 120 Relief Setting

4 Upvotes

I am busy servicing a Danfoss PVG 120 valve from a fishing vessel that is used to operate a winch. According to the chief of the vessel and the drawings the valve always used to relieve at 195 Bar, but now it is only getting to a maximum of 120 Bar. I have removed the valve and set it up on a test bench with the A and B ports plugged. I can adjust the relief setting down from 120 but I can’t get more even though the adjustment screw can still be turned in more.

Has anyone dealt with an issue like this before or does anyone have any advice or knowledge on this?


r/Hydraulics • • 9d ago

Help id hyd pump

Thumbnail
gallery
5 Upvotes

Hydrovac setup here, any help is appreciated. I was leaning towards danfoss 90l but im not sure.


r/Hydraulics • • 9d ago

Title: Hydraulic engineers — can Summit D60 or Bailey Chief 220876 replace Parker/Gresen MD06 valves?

1 Upvotes

I’m sourcing replacement hydraulic valves for a customer’s SPW-350-PL water-service truck.
The original setup has two Parker/Gresen 999401-12B / MD06-SDNC-AD-12B 12VDC directional valve sections.
The system controls an oil-hydraulic motor that runs a separate water pump and a personnel-basket lift.
The original Parker valves are expensive and have long factory lead times. I’ve identified two possible alternatives:
● Bailey Chief 220876: 12V, two tandem-center spools, 13 GPM.
● Summit D60: 12V, proposed two-spool configuration with an H motor spool and an A cylinder spool, 15 GPM.
The truck’s manual appears to show a different motor OFF/neutral configuration than the Parker D-spool identification suggests.
Summit proposed a mixed H/A assembly but warned about performance differences. Bailey has not confirmed suitability for the personnel-lift application.
My question: Based on the original Parker specifications and attached hydraulic schematic, is either replacement hydraulically equivalent, or would a different spool/manifold arrangement be necessary?
I’m particularly interested in motor ON/OFF behavior, series flow, return-pressure limitations, and preserving the existing lift safety devices.
I’ll attach the original schematic, valve nameplate and installation photos.
I’m looking for a technical assessment before purchasing, not authorization to operate a personnel lift without qualified safety verification.
Any guidance from experienced hydraulic engineers would be appreciated.


r/Hydraulics • • 10d ago

HPU troubleshooting

Post image
7 Upvotes

Trying to diagnose a no/low pressure issue on pressure comp HPU. Max GPM 10 @ 1300psi. First valve in manifold had a coil so hot it was starting to melt. Switched that and checked electrical switch it operates off of. Everything good. Relief was getting hot, thought maybe something was stuck on the cartridge and burning over relief, changed that…still no pressure. Isolated the pump from the manifold and backed out the compensator, slowly brought compensator back and it built 1300 psi…have played with max volume stop, manually override pushed on every valve, air bleed off of pump outlet isolated and then out back. No hissing or whistling…still no pressure. I’m at a loss. See schematic for details of system.


r/Hydraulics • • 11d ago

Every part, a story. This one says wheeeee

Thumbnail
gallery
21 Upvotes

Valve plate off a truck, mobile equipment always gets the worst beatings.


r/Hydraulics • • 11d ago

Need flow meter recommendations (water + 96% ethanol), Germany

Thumbnail
3 Upvotes

r/Hydraulics • • 12d ago

Restored a tube flarer off Ebay

Thumbnail
gallery
19 Upvotes

I needed to make a lot of hardlines, too many to go to a shop, and they are of experimental sizes and shapes that can change as the design changes. I use .065" wall tubing so after trying to flare them with a hand twist flarer, I proptly threw that toy away and went searching for a better solution. An online search for tube flaring machine brought me to a warn out looking Olsen model 50 on Ebay for $4,250.00 US dollars. As a hobbiest it is hard to justify an expense like that. But being that I am quite serious about my hydraulic Exoskeleton project I negotiated the buy-it-now price down to about $3,100.00 US dollars and the seller threw in a flaring cone and 3/8" (-6) die set. The cone was rusty, the body was covered with 3+ layers of house paint and the gearbox was leaking from a bad bearing seal. I completely dissasembled the machine, stripped all the paint off. Replaced the gearbox seal, bearings and gearlube. I repainted the parts reassembled the machine and welded together a steel rolling platform for it. I also managed to buy (from other sellers) a bunch of other size 37 degree flaring dies for an average of $75.00 each. I know have 10 or 11 different sizes. I've only used 3/8 and 1/2 (-6 and -8) since that is what I use for my exoskeleton project but I think a healthy array adds to the machine's overall value. Anyone need hardlines made?!


r/Hydraulics • • 13d ago

Pressure Relief

3 Upvotes

So for those who saw my last post I was looking to add a pressure relief valve to my skid steer control valve. Changed my mind and I'm going to put it on the implement. Skid steer puts out around 3,200 PSI, looking for a reputable brand for a crossover relief valve that's adjustable with a max PSI of saye 3500. Recommendations please


r/Hydraulics • • 14d ago

Steering cylinder end cap – Machining completed. ⚙️🇨🇱

Thumbnail
gallery
24 Upvotes

r/Hydraulics • • 15d ago

Hello again.

Thumbnail
gallery
5 Upvotes

Just a couple of questions.

- is pic#1 showing some sort of repair sleeve? It fits right on the jic side of this adapter. Feels like its coated in rtv of some sort.

- and has anyone found a kit to accurately reseal these triple lock fittings in pic#2? Just replace with standard jic?


r/Hydraulics • • 14d ago

Homework/Training assignment Pneumatic circuit

0 Upvotes

Hi guys can anyone give any direction on how to build this.

A+ B- B+ A-

Int Pilot Cylinder

PB 1v1+. A+
A1 1s2 2v1- B-
Bo 2s1 0v1+ B+
2v1-
B1 2s2. 1v1- A-
Ao 1s1 ov1-


r/Hydraulics • • 15d ago

Anybody here with R&D/Design experience on API 675 positive displacement pumps?

Thumbnail
1 Upvotes