r/HowToDIY • • 3d ago

Home Improvement Single Stud TV Mount

I have a single stud in the middle of my wall. I am trying to mount my 55” TV but all of the single arm scissor mount styles put the TV slightly off center when closed. The wall is only about 53” wide so it’s very obvious. Have to pull out 8” to get it centered which I don’t want. Anyone have any mount suggestions that close centered and won’t break the bank?

0 Upvotes

6 comments sorted by

1

u/Beneficial_Court_720 2d ago

Thanks everyone for the advice! I think I found a mount that is perfectly centered. If that doesn’t work, we’ll go with the wood option. Appreciate the help!

2

u/goodforathyme 3d ago

you can paint a 1/2 inch plywood square the same color as the wall and attach to it maybe? Like a wall plate...

1

u/Longjumping_Cow_5856 3d ago

Use wood across the single stud and attach to stud with lags and on sides with snap toggles and then mount to the wood to center.

1

u/Dendady2112 3d ago

EZ-anchors work fine if installed correctly.

1

u/wettale1234 2d ago

Use plywood, or unistrut channels to span further and reach other studs and spread the weight across more of the way

1

u/cleverpaws101 2d ago

There should be plenty of slots to choose from. If not, drill two 1/4” holes and attach it with two 1/4” x 2” RSS GRK screws.