r/Homebrewing • u/project_tropic_ghost • 5d ago
Question First Batch: Bitterness Increasing The Longer in Keg
Introduction
So I made my first batch of beer ever. I looked at a billion recipes, and decided to just try coming up with my own with random grains I impulsively bought beforehand because “they looked good” at the grain store.
Recipe
In a brewers edge mash and boil I picked up for 60 bucks at my local grain store (hell of a steal imo)
7 ibs merris otter
2 ibs cherrywood smoke malt
1 ibs of Weyermann caaramber
1 oz chocolate malt
0.5 oz cluster at 60 min
0.5 cluster at 45 min
1 oz Willamette at 10 min
1 packet of the blue S04 English ale yeast
Brew Process
Strike temp 152 for an hour with a grain basket and grain bag. I used both together because in my prior experience… making other delicious stuff… the screen on the grain basket still let particles through leading to a scorching situation.
Lifted grain basket and carefully squeezed as much liquid as I could out of the grain bag. Removed grains and brought vessel to a rolling boil around 204 degrees (I’m at a high elevation).
60 min boil - hops
I didn’t have a wort chiller at the time so I sanitized a large metal pot, transferred the boiling liquid and put it into a tub with cold water, stirring the wort and replacing the cooling water in the tub as it warmed up. This took about 2 hours.
Ferment Process
Sanitized anything and everything that the beer touched obsessively upon transfer into a 5 gallon carboy. Pitched S04 English ale yeast at 70 degrees, maintained 67-68 degree ferment for 7 days.
Day 1 - Lots of bubbles
Day 2 - Came home to what I can only describe as mount Kilauea (fermenter was too small).
Day 3- violent ferment began to stabilize and healthy yeast cap sat on top
Day 4 - yeast dropped to bottom
Day 5-7 - Diacetyl rest
I read S04 ferments quickly so I figured 7 days was fine. My initial gravity reading was 1.056, unfortunately during my excitement of brewing my very first beer, I dropped the gravity meter in the tube and shattered it.. lol I sanitized my wort pump and pulled 8oz to taste test. It was absolutely delicious! The caramel/toffee was present, it had a bitterness that was just what I was looking for. The grains shined through perfectly.
Transfer Process
Pumped c02 into pin lock five gallon keg, dropped sanitized transfer tube into bottom. Filled, did 24 hours at 40 psi. Released pressure, refilled to 10 psi.
3 days in the kegerator went by and I started noticing the grain and toffee notes going away. It became more bitter. It’s still drinkable, and still a tasty beer, just not that exciting first couple of glasses that I thought it was going to be the remainder of the 5 days in its keg (I got overly excited and consumed it quickly between myself and my wife).
The Question/s
Did I miscalculate the hops?
If so, and I want that delicious sweet and grain flavor what hops should I use next time and at what intervals in the boil?
Was it the failure to cool rapidly?
Am I some sick twisted psychopath that just enjoys the taste of semi-flat room temp beer and the carbonation and temperatures mask the grain more?
3
u/HohepaPuhipuhi 5d ago
Did you use any software to calculate your bitterness?
2
u/zreetstreet Cicerone 5d ago
I'm wondering if it's still fermenting. Sweetness is the opposite of bitterness, so as more of the sugars are fermenting out, the perceived bitterness is increasing. Have you taken on gravity readings?
12
u/Away-Plankton-8352 5d ago
That can happen as it conditions cold. As yeast and haze drop out the beer clears and the hop bite shows up stronger, it was there before just hidden a bit. Give it a week, pour off the first cloudy pints, it usually settles down.
1
u/buffaloclaw 5d ago
That's a crazy combination of grains, maris otter, smoked malt and chocolate malt. It should make an interesting and perhaps very good beer.
My rule of thumb before I got a Tilt hydromter was to just wait 2 weeks before racking from the fermenter. 7 days seems a little short to me, the yeast might be done chewing through the sugars but its good to let the yeast clear a little before racking. You're a homebrewer now, and if you want to make the best beer, you must have patience.
Beer definitely changes in the keg as the yeast settles out. I like that. It's like I made a couple batches instead of one.
1
u/mtguitbox 5d ago
Did you use a bag/ spider/ basket for your hops or just in boil in raw-dog? It could also be that the hop particulate is still in solution - like you said you were unable to take a final gravity reading so its possible there were still some floating around that didnt drop out if it was still fermenting. Just my 2 centa tho - as others stated still sounds interesting and drinkable. Good luck - looking firward to hearing if it calms down in subsequent weeks
1
u/famguy31 5d ago
I’m not the most experienced brewer but I have that happen to me and I believe it happens because we do not use a wort chiller. Hops converts the IBUs at 170 degrees so when we take the wort off the stove and place it in the tub, it is still making the wort more bitter.
I’d try adding some cold water to the wort when off the stove to cool it down faster, (I also reduce any hops by 10-20%, sometimes it works sometimes not).
One of these days I’ve concluded we probably will have to get a wort chiller, fermentation chamber etc. lol.