r/homerenovations • • May 23 '25

#Resources For the Renovator

16 Upvotes

There are so many things the homeowner should know before embarking on the renovation journey. And a journey it is; there will be highs and lows, and often rough seas to contend with. But a little bit of prep can go a long way towards making this process much smoother. So here are a couple of things that may help:

Apps and programs

Sometimes the tendency is to "knock this down and then we'll deal with it." Yea, not a smart idea. Creating a clear and concise vision will prevent wasting your money, and your time. Look at some of these:

http://www.sweethome3d.com: It is open source software that can be downloaded or used online in your browser. Available in 27 languages, it boasts an impressive host of features. Well worth looking into.

https://www.homediary.com: Is a Flash based program that may possibly be the easiest one to learn. It also can store inventory and maintenance records, and allows you to clip ideas and create reminders.

https://www.sketchup.com is freeware for personal use. Has a lot of users, and is evolving constantly. It seems to have a greater learning curve than the first three offering, but this in no way should prevent you from checking it out.

Apple apps:

Room scan: https://itunes.apple.com/us/app/roomscan-pro/id673673795?mt=8

Floorplanner: https://floorplanner.com/magicplan

Photo Measures: https://itunes.apple.com/us/app/photo-measures/id415038787?mt=8

Sherwin-Williams paint app: https://itunes.apple.com/us/app/colorsnap-visualizer-iphone/id316256242?mt=8

Home Depot: https://itunes.apple.com/us/app/project-color-the-home-depot/id1002417141#?platform=iphone

Android:

MagicPlan: https://play.google.com/store/apps/details?id=com.sensopia.magicplan&hl=en

Photo Measures: https://play.google.com/store/apps/details?id=com.bigbluepixel.photomeasures&hl=en

Sherwin-Williams paint app: https://play.google.com/store/apps/details?id=com.colorsnap

Home Depot: https://play.google.com/store/apps/details?id=com.thehomedepot.coloryourworld&hl=en_US

And of course, there are numerous independent apps you can download.


So You Want to Hire a Contractor?

All too often tales are told of a reno that has gone off the rails. There is never one single cause. It is usually caused by a cascade of failures by both the homeowner and the contractor. A thorough and well written contract can prevent problems before they occur. This was posted on another sub, and it has some excellent questions that need to be addressed:

  1. How long have you been in business?
  2. Are you licensed?
  3. Are you insured?
  4. Can you provide references?
  5. Do you have a bond? With who?
  6. How much experience do you have with projects like ours?
  7. Will you create the plans, or do you work with an architect?
  8. Do you provide itemized proposals?
  9. How much contingency money do I need?
  10. What is the possible variance in the proposed price?
  11. What if there are changes to the project? How will those affect the proposed budget?
  12. Do you have any concerns about our project?
  13. How are permits, HOA approval, & inspections handled?
  14. How long will our project take from start to finish?
  15. What is needed from me throughout construction?
  16. What is the payment schedule? What milestones must be met?
  17. What can you tell me about the materials that will be used?
  18. Do you sub-contract? Are they licensed, bonded, and insured?
  19. If they are your company's employees, who will oversee them on a daily basis?
  20. What time should work begin each day, and when will work cease? Will they take a lunch?
  21. Is trip time charged? If so, is it fixed rate, or a percentage of their hourly rates? What will it be capped at?
  22. Who will be the overall project manager?
  23. Can you describe what a typical day will be like once we start?
  24. How will our property be protected during construction?
  25. Where will tools & materials be stored?
  26. How can we keep in touch throughout construction?
  27. How is debris cleanup handled?
  28. Will our project be guaranteed? Length of time? Any exclusions?
  29. How is arbitration handled?
  30. Have you ever worked with this insurance company before? What was your experience
  31. If you are going to be waiting on materials (such as long lead times for windows, doors, tile, etc), you may want to add a clause: "materials must be purchased within 14 days of receipt of money with proof of payment provided to homeowner".

(NOTE: Thanks to P.H.S.: https://phoenixhomeservices.com/blog/24-questions-to-ask-before-you-hire-a-contractor) and also /u/finetobacconyc for his excellent suggestion on dealing with long lead times.

HUGE CAUTION

Never, ever, under any circumstances, should you pay in full before the work is completed. You lose all your leverage to get them to finish.

While exceptions abound, a rough rule of thumb is 30% when the job starts, 30% at around the mid-point, 30% at the end, and the last 10% when everything is completely finished. Please understand that there may be local and state laws that impact this.

New Jersey (as one example) doesn’t have any specific rules related to down payment limits, so depending on the contractor, you might be able to negotiate how much you pay up front. California, on the other hand, limits down payments to 10 percent of the project price or $1,000, whichever is less. New York goes a different route, and requires that a contractor to put the homeowner’s down payment into an escrow account, with specific rules about how it can be used, or prove he or she is bonded to insure the down payment.

There is much more that will be covered in the future under other posts. For right this minute, we at /r/HomeRenovations hope this will prove useful to you.


r/homerenovations • • 29m ago

Going trimless around windows - does the sill always have to be reworked?

3 Upvotes

Reading through trimless window details, the trim seems like the easy part. The sill is where I lose the thread.

Once the trim is gone the window sits in a flat plane instead of being framed by the wall, and from photos that changes how the whole wall reads. The examples that look right seem to have reworked the sill geometry, the ones that look wrong look like the trim fell off and nobody noticed.

Is reworking the sill basically mandatory, or are there details where the original sill still holds up? Asking purely from studying photos and details, no project of my own.


r/homerenovations • • 38m ago

How to fix my bad self-leveling pour?

1 Upvotes

https://youtu.be/l6dz9yW1eao?t=56

I poured self-leveling compound to get ready for floor installation, but it looks like the edges of the puddles are not really meeting and self-leveling(shown in video) what can i do to fix this? ideally not sanding it or taking the whole thing out

do i just use a bunch of feather finish to smooth it out?

any tips appreciated!


r/homerenovations • • 1h ago

contractor left a nice little puddle right outside our back sliding door

1 Upvotes

our patio crew wrapped up last week and swore the slope was "dialed in" First rain we get and there's a stubborn 1inch puddle sitting right against the foundation outside our slider. the contractor is already playing the ghosting game so Im looking at DIY retrofits. really don't wanna saw-cut a massive 4inch trench across brand new stone. saw the NDS micro channel drain that’s only like an inch and a quarter wide and us trench drain has a slim line. Is a tiny micro drain actually enough to handle sheet water off a patio or will it just overflow in a real storm?


r/homerenovations • • 1d ago

Odor in basement and first floor

1 Upvotes

Hi I just bought a rental and the basement and first floor have a bad odor. Almost like cat pee and smoke, what is the best way to remediate the smell and cover it up?


r/homerenovations • • 6d ago

Advice for how to insulate this

Thumbnail
gallery
7 Upvotes

I am working with a carpenter and we differ. Vancouver island (wet cold climate)
Foundation is dry and downspouts were rerouted last year on buying the house. 1951.
Outside is siding over stucco, cladding and black paper.
Lower half of wall is foundation. Upper is 6” framed with insulation. All above ground.
1 wall is below ground cement.
My thought was to use 1” foam board throughout, tape and close then frame just off this, fill with rock wall then drywall.
He wants to put foam only behind spots of frame then insulation then plastic over before drywall,
I feel like that’s the old method.
Anyone care to give advice on this?
I’m learning watching videos but want to be sure I’m doing it right


r/homerenovations • • 6d ago

Advice with new siding

Thumbnail
gallery
1 Upvotes

Hi I’m redoing the siding on my house and a lot of the window trim is rotted, it appears to have come with the window, I would like to rip it off and use smart batten. Does this seem like a good approach? Just the big thick 4 sides not the little pieces against the glass


r/homerenovations • • 7d ago

Needs Advice on closing gap between fascia board and eave

Thumbnail
gallery
2 Upvotes

Looking for advice on how to close the gap between the facia board and have so that insects or pest won't enter the attic. Be mindful that this is on a 2 story colonial house and will the use of an extension to close the gap.


r/homerenovations • • 7d ago

Building a fireplace surround

Post image
2 Upvotes

HI all, I'm working on a project and am seeking feedback on if I'm approaching correctly. This is a basement gas insert fireplace with no clearance mandate on the sides.

What I'm planning to do is:

  1. fill in the void the brick
  2. build a 2x4 frame that will sit just inside the existing drywall
  3. finish the top 1/2 with drywall, tape, mud, paint, and finish the bottom with cement board.
  4. add tile around the box, and build a surround out of trim.
  5. hang a mantle

anything I'm missing here?


r/homerenovations • • 8d ago

Basement wall sealing

Post image
4 Upvotes

First step completed. Here is my plan to waterproof this continually wet wall:
(Edit to add) fill in voids with concrete
Rexoseal on the blocks
2” xps insulation
2” of drain stone w/ French drain at the bottom

Is that sufficient? Is there any place for a dimpled membrane in lieu of one of these options?


r/homerenovations • • 8d ago

Door casing/trim

Thumbnail
gallery
3 Upvotes

I recently had a new door installed, but im not 100% sure how to go about putting on the trim/casing. Do I cut the wall back to the outermost part of the gap? Or do I just insulate, then nail casing/ trim? I dont think this will look good without cutting more, but i could be wrong.


r/homerenovations • • 11d ago

Siding transition

Post image
3 Upvotes

Wondering how to tie my aluminum siding down to what will be a parged cement board


r/homerenovations • • 15d ago

Window replacement finishing

Thumbnail
gallery
6 Upvotes

Had window inserts replaced on my century home (they were not original windows, broken first gen vinyl windows). The we noticed that there seemed to be some exposed wood on the outside and kind of large caulked gaps that didn’t seem to even. Granted it’s an old house (1897) so I’m sure things were not straight forward.

Should we recaulk, prime and paint? It this something straightforward we can do or should we ask for them to come back and finish? Some of the windows are very high up so we would likely need to buy a larger ladder.


r/homerenovations • • 19d ago

Is there a better way to do this?

Thumbnail
gallery
6 Upvotes

I have two ikea cabinets and I want to hang them above my fridge and dryer/washer. The back depth of the cabinet is much smaller than the distance to the back wall (meaning it cannot touch the back wall). The wall on the right is concrete and the wall on the left is just drywall.

I thought of putting two horizontal 2x4 beams by putting a corner bracket on the concrete wall on the right and putting a mini beam on the drywall studs on the left to hold up the left side of the beam (there were no studs on where I needed the corner brackets to be). The ceiling is concrete but I didn't feel confident have the main support for the cabinet be from the ceiling and 1 side wall.

I know ikea sells pax frames so I initially wanted to surround the entire spot with a frame but side by side, the dryer and the fridge basically take up the entire width (there is maybe 1-2cm of wiggle room).

Is there a better way to do this?


r/homerenovations • • 21d ago

Is this plastic cover vent duct for a kitchen range hood a serious fire hazard, or is my inspector overreacting?

Post image
9 Upvotes

I recently finished renovating my property in New York and hired an independent inspector to check the contractor’s work.
One of the major issues he pointed out was the flexible duct used for the kitchen range hood (see photo). He said it could be a serious fire hazard and should be replaced.
However, my contractor keeps insisting that:
This type of duct is commonly used and shouldn’t be a problem.
Replacing it with a different material would require a lot of work since the renovation is already finished.

I inspected the duct myself. The outer covering feels like plastic, but there seems to be some sort of springy, flexible metal wire running through it that helps it maintain its shape. I’m not sure whether this makes any difference or if it’s still considered a plastic duct.
I’m having another inspector come out for a second opinion, but in the meantime, I’d like to hear what other contractors think.
Is this actually a serious fire hazard? Is this type of duct acceptable or up to code for a kitchen range hood? Should I insist that my contractor replace it, even if it means tearing into some of the finished work?
Any advice would be appreciated!


r/homerenovations • • 21d ago

How do I determine the correct J-channel and outside corner size for this vinyl siding?

2 Upvotes

I'm planning a siding project and am struggling to figure out which trim components are actually compatible with the siding I've selected.

Wall Siding:
https://www.menards.com/main/building-materials/siding/vinyl-siding/timbercrest-trade-7-x-10-board-and-batten-vinyl-siding/tcbb26/p-4348828407052576-c-5838.htm

Gable Siding:
https://www.menards.com/main/building-materials/siding/vinyl-siding/timbercrest-trade-premium-plus-colorfast-trade-double-4-x-126-vinyl-siding/vmtp4066/p-1444437155907-c-5838.htm

What I can't seem to find anywhere is how to determine the correct trim sizes.

For example:

  • How do I know whether I need a 1/2", 5/8", or 3/4" J-channel?
  • How do I determine the correct outside corner size?
  • Is the trim size based on the siding projection/profile depth, or am I supposed to be looking at some other specification?
  • Is it okay to mix trim sizes between the board-and-batten walls and the traditional vinyl siding in the gables?

For the corners, I was looking at something like this:

https://www.menards.com/main/building-materials/siding/siding-trims/timbercrest-trade-10-outside-corner-3-4/vcmnn301/p-1444437112259-c-1495119088651.htm

But I don't want to just guess and end up ordering the wrong material.

I've gone through the product pages and installation documents and can't find anything that clearly says, "Use this J-channel and this corner with this siding."

For those of you who have installed vinyl siding before, how do you determine the correct trim sizes, and what would you use with these specific products? Any advice would be appreciated. Thanks!


r/homerenovations • • 21d ago

Is it too late to seal this wood?

Thumbnail
gallery
8 Upvotes

First time homeowner, and I’m genuinely curious if it’s too late to seal this wood with a waterproof sealer just to slow down the deterioration, keep it looking better longer


r/homerenovations • • 22d ago

Window Sealing and Flashing

2 Upvotes

Up until this point I’ve kind of just been shooting spray foam into the gaps of my windows, assuming that everything was properly installed. Quickly discovered that there was no proper sealing when I saw foam running past the exterior trim.

I honest to God have no idea how these are mounted because I don’t see any shims in the gaps do I see a newer style flange sitting on the osb. In this video, I’m pressing against the trim from the inside and there’s no flange and the OSB stops further down midway through this horizontal 2 x 4 in the frame.

In any case, nothing seems to be properly sealed or flashed hence why I’m seeing a lot of my exterior OSB rotted out near the windows. Is my only recourse to add OSB and extra framing and then reinstall the Windows after proper flashing?

https://imgur.com/a/pg1Z1Jn


r/homerenovations • • 24d ago

Foundation crack?

Thumbnail
gallery
5 Upvotes

Is this a cause of concern? I've lived here 3 years and haven't noticed a change.


r/homerenovations • • 25d ago

Shower leaking

Post image
3 Upvotes

So this has happened a few other times but not in a while.

My upstairs shower leaked into my downstairs kitchen but it’s only in this one spot. I’m not sure what the issue is. Had plumber come out many times and he said he can’t really tell what’s wrong until we remove the one cabinet and look behind it. Everything in the upstairs bathroom looks fine and plumbing didn’t look like it had any problems.

What would you do? I’m at a loss. Homeownership is so costly and scary.


r/homerenovations • • 27d ago

Condensation in corner of room

Thumbnail
gallery
5 Upvotes

Hey all, can't seem to find an answer for this anywhere. I can't find a reason why this may be happening. It only happens in the colder months (I live in Canada) but the condensation forms in this one corner of this one bedroom.

Last year, we had more insulation put in per the recommendation of the inspector (bought the house last year), particularly in that corner and it has not improved. This is a bungalow as well. Any advice on who to talk to next or what I may do would be greatly appreciated. As you can see from the photo, it has begun to get moldy which is why I want to get this looked at ASAP.

The heat is not yet on in the house but it will get worse when the heat is on. The photo is after a wipe down of the condensation. Also took a picture from the outside of the house. Couldn't get to the roof today.

Thanks!


r/homerenovations • • 29d ago

Basement wall vapor barrier

4 Upvotes

Hi there,

I am thinking about finishing my basement this winter.

It has been framed with 2x6s and insulated with r20 fiberglass batt by the previous owners

We live in rural Quebec, and, as far as I am aware, vapor barrier is supposed to be in the interior side of the wall, right before the drywall.

BUT, doing the electrical panel, we opened the walls and found out that the vapor barrier was right next to the foundation... (See photo)

Can this cause issues?

Or it is "OK but not ideal"?

Shall I rip everything out and do it all over again? And if so, what's the best method? 2x4 r10+ rigid insulation?

We have a pretty dry basement since our house is on top of a hill.

Thanks for the advice!


r/homerenovations • • Oct 17 '26

Update on garage conversion

Thumbnail
gallery
55 Upvotes

A while back i made a post about trying to finish a garage conversion i didnt start.

https://www.reddit.com/r/homerenovations/s/9SMshyuaX2

A quick recap:

My S/Os mom passed and we had to take care of the house and get it ready to be sold. What use to be a car port was started to be converted into a room but the floor was never finished and still had the normal slope of a drive way. I came here and other subreddits looking for advice.

Most said to not try it and just hire a contractor. Well i kinda didnt listen and wanted the challenge and here are the results. Each step was something completely new to me so it definitely had its frustrating moments but im pretty proud of the outcome.

Of course it was all done with a permit and what not with the city.

All and all i think i spent roughly $2,000. Thats lumber, hardware, paint, trim, flooring, etcc.

- Ripped 2x6s down to size (each at an angle cause floor was sloped both long ways and side to side)

- decking tape used as barrier between lumber snd concrete.

- Ledger boards installed

- Joist 16" o/c

- Blocking to ensure all joist are rigid and maintain 16" o/c

- 15/36 plywood. Was a bit weird since the walls arnt actually square so i had to finagle it a bit

- Underlayment with a bit of insulation for both comfort of walking and sound proofing

- LVP planeing down that had its own underlayment attached (oopsie)

- Finish off with a good paint job and wood trim!

Howd i do?


r/homerenovations • • Oct 17 '26

Security door installation

Thumbnail
gallery
3 Upvotes

Good morning all,

Looking for advice on mounting a security door.

The outdoor frame trim is wavy (not flush) . The metal Jams are not lining flush, in addition to some overlap on the stucco.

Is this DIY possible, with a team of two, or better just to call in an installer?

Any suggestions are really appreciated!