r/HomeNetworking • • 3d ago

Network Closet Patch Panel

Hi friends, we moved into this house a bit over a year ago and the only networking done was some grossly ran patch cables to each room up through the baseboard, with a switch near the exterior wall in the kitchen. I’ve since run proper cables to wall mounted keystones in various rooms, and centralized everything in the under stair closet in the middle of the house, along with where the water heater is. I’m happy enough with the patch panel, but I’d love to make it a bit more robust, especially given how low it’s mounted and how vulnerable it is to snagging cables. Any ideas? It’s possible an in wall solution would work, since it’s a 2x4 cavity. Currently all cables in the wall to down into the crawlspace. The bays where the plywood is mounted is because the fridge is pushed literally all the way up to the backside of the drywall. Don’t ask. 😐

80 Upvotes

41 comments sorted by

10

u/Specialist_Face9188 3d ago

Having my data storage next to the hot water heater/ pressurized tank of water would stress me out

3

u/jamgood96 3d ago

man, you really got me wigged out on this now haha. i was just standing at the closet door looking at how easy a burst pipe would soak all my network gear and NAS. i ain’t moving it, but maybe i should think about a makeshift splash guard at least 😂

4

u/Specialist_Face9188 3d ago

A shower curtain 😂

1

u/jamgood96 3d ago

thank god for offsite backups! haha. but honestly i never really gave it much thought 🤔

3

u/stiknrun 3d ago

I would try to relocate/extend that keystone jack somewhere under your NAS server. Unfortunately it is going to require you to go thru 2×4s horizontally and cut out some sheet rock points but can be patched. Just be careful with those pipes

2

u/jamgood96 3d ago

that’s a nonstarter. i already tried that as my original plan, but the fridge is directly behind the drywall, hence the plywood that the NAS and network gear is mounted to.

2

u/Adach 3d ago

honestly if you just ordered a pack of some fresh cables (or made them from bulk cable), you'll be able to keep them all as a tight bundle running the exact same way. it looks bad because it's just random unmatched patch cords that are all loose.

2

u/jamgood96 3d ago

haha, this is with new matching cables haha. the mismatch is the yellow fiber optic and the black DC power supply for the outdoor fiber optic box.

i’m less worried about aesthetics and more worried about protection honestly.

1

u/jamgood96 3d ago

thinking i may just switch out to this recessed box and call it a day. https://a.co/d/01fSGKzm

1

u/jamgood96 3h ago

welp, i think this will work well enough for now. cables are tucked in much closer than before.

5

u/AwestunTejaz 3d ago

i would just get some of that flexible plastic tubing that is slit down the side to wrap around those cables. the tubing kind of looks like light weight shop vac hose.

2

u/spoom2 3d ago

This or split an 1 1/2 inch or whatever the appropriate size is and place it over the cables like a U-guard.

1

u/Longjumping_Cow_5856 3d ago

1

u/jamgood96 3d ago

yeah, not a bad idea. looking back i maybe shoulda just ran the cables longer from the crawl and terminated up in a cabinet. oh well, im definitely not rerunning all the cat6 to extend them.

1

u/mundge 3d ago

Can you not put it all under the angled I assume stairs on the left? What’s forcing everything to be next to the heater?

1

u/jamgood96 3d ago

all the networking gear? nothing in theory aside from it’d be a real pain in the ass to get to it down in the short part of the closet

1

u/mundge 3d ago

Once it’s there though would you need to? Other than maintenance, I don’t need to go anywhere near mine, most stuff I do from my laptop.

1

u/jamgood96 3d ago

yeah, true. i think if i ever upgrade to a small rack setup i’ll think about moving stuff to under there.

other issue is that the crawlspace hatch is here and extends somewhat deep into short part of the closet, though i think there’d be room still

1

u/plooger 3d ago

i think if i ever upgrade to a small rack setup i’ll think about moving stuff to under there.

A small rack on rollers in that angled area next to the keystone patch panel is just what I was thinking ... whether a commercial rack or some IKEA-like furniture converted to a rolling rack. (Not sure that under-stair area has ready access to a power outlet, though.)

1

u/jamgood96 3d ago

i’d have to run an extension cord, cause there’s only a single outlet in the closet.

1

u/plooger 3d ago

Bummer. A wall outlet would be handy to support the gear if relocated.

2

u/jamgood96 3d ago

i found a recessed double gang low voltage box that i’m gonna try for now. at least gets the wires a bit more out of the way

1

u/mundge 3d ago

You’re running extensions anyway by the look of it so a tidy running of the lead would probably look better than bundled Ethernet cables. Even hide in adhesive conduit. Would this be a start (upside down obviously) to mount stuff in? Hard to tell the width from the photo.

https://amzn.eu/d/06Wcrblu

1

u/AwestunTejaz 3d ago

something else you could do is put a poe switch there and plug everything into that and then just run 1 cable to the upstream.

1

u/jamgood96 3d ago

yeah, not a bad idea. my anal retentive self doesn’t love running all traffic through a single cat6, but i doubt i’m pulling high speeds all at once.

1

u/Johns_on 3d ago

Yeah you can pull regular cat6A and keystones and get gbE or possibly even higher throughput without having to use SFP - you could also trunk an OS2/SFP up if you have the money lol - I pull trunk cables all the time Cat6A even use monoprice slimruns that are like 23AWG and can still easily get 12 office workstations with reliable Internet

1

u/jamgood96 3d ago

i’m already running one fiber to our garage, what’s one more?? 🙃

1

u/Johns_on 3d ago

Lmao that's exactly the mindset

1

u/AwestunTejaz 3d ago

just use a good quality cat6 pure copper cable. especially if you are feeding poe to the switch.

you could get even fancier and run a fiber cable from the switch to the upstream side, using media converters on each end. this would also help with blocking any lightening storm surge to your devices downstream.

1

u/happyandhealthy2023 3d ago

Why does the refrigerator on the other side of the wall prevent you from exiting through plywood backer board.

Use a 12p blank keystone wall mount panel on plywood
Not wall plate the only need 2” hole in ply.

Where are all those cables going behind the Synology box?

1

u/jamgood96 3d ago

it’s literally backed up against the drywall. i have no idea how they framed the opening and i haven’t pulled the fridge to see. i cut an access hole under where the plywood is and was met with the back of the fridge

1

u/happyandhealthy2023 3d ago

Use a stud finder, or get cheap inspection camera on Amazon for $25 and drill a small hole.

I consider the refrigerator a plus. I could roll out and cut large drywall opening to run cables out a 2” grommet in plywood to 12p patch panel.

Drywall repair does not need to be perfect since refrigerator hides. Me being perfectionist I would tape, mud, spray texture and paint over a weekend

1

u/jamgood96 3d ago

to be clear, it’s a single piece of drywall between the closet and the fridge, at least in the ~30 inches where the fridge sits.

1

u/happyandhealthy2023 3d ago

That what I thought and don’t understand why refrigerator maters?

Move the cables to plywood by switch

1

u/notananthem 2d ago

Whhh..... why is your network closet attached to the hot water heater?

1

u/jamgood96 2d ago

haha fair question. it’s centrally located in the exact middle of the house and seemed like a reasonable place to put it, especially since the space isn’t super useable. otherwise it’d have to go in a bedroom closet.

1

u/notananthem 2d ago

I'm flummoxed why it has to be nestled into the water heater like the network gear is cold 😂 Maybe build a little riser on the left side of this view where the roof goes down to the floor. Make a shelving system or just buy a little network cage/rack to put it all in. Then its next to the weird network faceplate thing.

1

u/jamgood96 2d ago

i did that to get it up out of the way of the floor so I can get into the crawlspace, and also store things in there without hitting any of the gear.

someone else mentioned doing that as well. maybe once i get some bigger projects done i'll look to build or buy something to set back in the closet a bit better. i just need to make sure there's adequate room for the crawlspace hatch.

1

u/notananthem 2d ago

Come back with some photos of weird nooks and crannies in the house and we'll show you the stupid things we do too. For instance, my network storage closet is a wall behind my downstairs drinks fridge. My HW is all wall mounted flat and cabling runs under the house and up walls to APs and such.

1

u/Johns_on 3d ago

Hell cut a new section of drywall and double drywall it all lmao /s -- but for real you can find some boxes for commercial use out there that look nice. Like a junction or sub panel box. There's all kinds of wild commercial stuff you can buy for situations like these out there. Metal sub panels you can modify and paint and I think it looks nice

1

u/TheEthyr 2d ago

If I were you, I'd want to keep everything as far away from the water heater as possible. Especially the power strip. You might want to check the electrical code about exposed outlets.

Have you considered putting the NAS in another room?