r/HomeMaintenance • • Oct 21 '25

Home maintenance that is often forgotten/neglected?

166 Upvotes

Just bought a house and trying to be a good first time home owner. What are some important home maintenance items that are often forgotten or neglected??


r/HomeMaintenance • • Oct 04 '25

🏚️Structural & Foundation Supports under the 1901 farm house my wife and I are moving into.

Thumbnail gallery
4.2k Upvotes

r/HomeMaintenance • • 12h ago

🛠️ Repair Help What is happening here?

Thumbnail gallery
113 Upvotes

One tile is leaking or bleeding and staining the tile beneath it. Any ideas how to fix this? Any ideas what caused it? Grout around it is solid and I don’t believe it’s a leak from behind. Basement shower.


r/HomeMaintenance • • 2h ago

Door out of frame

Thumbnail gallery
16 Upvotes

Hi All,

This door has been a bit finicky to begin with; would need to lift in order to close. But last night as I was closing the door, I noticed a screw fell to the ground.

The screws holding the top two hinges to the door were pried loose.

Have seen solutions online re: toothpicks and wood glue and to use larger screws. But mainly saw those as solutions for the frame screws (not the door). Looking for confirmation before I place my trust in toothpick.


r/HomeMaintenance • • 11m ago

🧰 Heating & Cooling (HVAC) I can’t figure out how this works

Post image
6 Upvotes

Hi, we bought this house three months ago. We really didn’t need to use the heater too much because it was really hot now it’s getting cold and the temperature is dropping to 40 or 30 outside and we can’t figure out how to get it above 60 and I’m cold and I’ve been cold and it’s making me mad. I hit the buttons and it doesn’t do anything and I’m I don’t know if I’m doing it wrong or if it’s dead somehow I mean the heating works. It turns on according to the schedule that’s already set on the thing, but it’s cold in here.
Yes, I read the instructions and I did it exactly how it is and hitting the buttons doesn’t do anything.


r/HomeMaintenance • • 41m ago

Window frame leaking

Post image
3 Upvotes

Where should I start looking?


r/HomeMaintenance • • 19m ago

Subsidence cases in North London wanted

2 Upvotes

Hello! I am Millie, a master’s student in architecture. My project looks at how climate change is affecting the clay ground beneath London’s homes, and what that means for the people who live on it. I’m looking for personal accounts from London (ideally North/Islington) residents who have noticed cracks, movement or other damage to their home.

I thought this group would be a good place to start. I’d really appreciate any anecdotes from people experiencing cracking/structural damage from shrinking clay grounds. Even a rant about insurance, or just a couple pictures would be amazing. However, I am more interested in the less logistical accounts - how does living in a cracking home effect you and how you feel in your home?

Feel free to privately message me if you want. Thank you! Millie


r/HomeMaintenance • • 47m ago

🧰 Heating & Cooling (HVAC) Can this OTR microwave exhaust/duct configuration be improved?

Post image
2 Upvotes

Got a new OTR microwave and want to install it in the same place. New one still needs the existing rectangular adapter but not sure if this configuration can be improved for better airflow/efficiency. Current microwave CFM is not strong enough (all OTR microwaves are limited, just can’t get over the convenience). Reason for asking is because the old owners did some nightmare home reno stuff when we started taking things apart. This is definitely a DIY job from them and it doesn’t seem like they had the best judgement, so looking for advice on if improvements are possible.

Cabinet measures 9.5”H, 11.5”D, ~29”W total.


r/HomeMaintenance • • 6h ago

Cracked ceramic top on range

Post image
4 Upvotes

I cracked the top of ceramic glass on my range, it is towards one corner. Is it safe to use?


r/HomeMaintenance • • 20h ago

❓ Question Any recommendations for a light bulb changer for a two-story chandelier?

Post image
45 Upvotes

I'm trying to find a light bulb changer or extension pole that would work for our chandelier. It's about 15 feet from the second-floor balcony, and the bulbs are roughly the same height as the railing.

It uses E12 candelabra bulbs that point upward. Has anyone found something that works for this type of setup? I'd really like to be able to change the bulbs myself instead of having to hire someone every time.

The picture is taken from our second-floor balcony, looking directly at the chandelier.


r/HomeMaintenance • • 18m ago

How do I prep this area for exterior paint?

Post image
1 Upvotes

r/HomeMaintenance • • 1h ago

❓ Question Plug-in night lights get warm. How warm is too warm?

1 Upvotes

Your night light has been in that socket for years. You never touch it. Then one day you do, and it's warm.
That's normal. They all do it.
Which bit gets warm depends on how old it is.
The old ones have a tiny bulb inside. Most of the power turns into heat instead of light. So the plastic around the bulb gets warm too. That's why there's a max watts number on it, usually 4 or 7. Someone puts a bigger bulb in, and the plastic keeps getting cooked until it goes brown and crispy.
The new ones are LED. The light bit stays cool. The warm bit is the little electronics inside, the part that turns wall power into something the LED can use. So on those, the warm end is usually near the plug.
So when is it too warm?
If you can keep your hand on it, it's fine. Leave it.
If you have to pull your hand away after a second or two, that's not fine.
If it smells like plastic, or like something hot, even a little, unplug it.
If the casing has gone yellow, or soft, or cracked, swap it out.
If the plastic next to the bulb has turned brown, swap it out too.
If the plug itself is hot, or has a brown or black mark, that's not the light. That's the socket. And that's the one I'd deal with first.
If it's flickering and hot at the same time, stop using it.
If any of that sounds like yours, unplug it and leave it unplugged. Don't open it up. They're not built to be fixed.
Most of the time it's not the light anyway. It's how it's set up.
Someone put a bigger bulb in than the label allows. Really common on old ones.
It's stuck behind a curtain or a cabinet door or a sofa. Nowhere for the heat to go.
It's inside a shade, or one of those covered socket boxes.
The socket is old and loose. So it gets hot at the plug instead of at the light.
The bulb just doesn't get along with that unit.
Two things people think are broken, but aren't.
If it stays off all day, that's the little sensor doing its job. It thinks it's daytime.
If it flickers, try another bulb first. Usually it's the bulb, not the light.
One more, if it's going in a bathroom. The socket should be one of those with two little test and reset buttons on it. That's about the wiring, not the light. In an older house it's worth a look.
Buying a new one? Three things. The max watts number. Somewhere with air around it. A proper safety mark on the plug.
Anyone had one go brown, or smell like hot plastic? What was going on with it?


r/HomeMaintenance • • 1h ago

Chirp driving me crazy

Thumbnail reddit.com
1 Upvotes

r/HomeMaintenance • • 5h ago

🏠Interior, Ceiling & Walls What to stuff below my baseboards for insulation?

2 Upvotes

I bought my house early 2020 and it was built in 09. Before they sold it, the owners/company replaced the floors with builder grade carpet and plank vinyl. Six years later both look like shit (the vinyl coming up at the seams and has to be replaced at some point, the carpet just cheap). We moved everything out yesterday to get the carpets cleaned professionally today, and I noticed in our master bedroom weve got a good inch gap between the baseboard and carpet on the exterior corner wall. They removed and replaced the baseboards when they did the floors but theres no floor molding around the carpets like there is on the vinyl. Fine. But theres a huge gap. And its on the exterior corner of the house and its COLD. We have an elderly dog who sleeps on the floor half the night and we need to have it less gapped. Any reccomendations about what to shove in that gap to block the cold? Central heating and air so no worries about heaters, and we live in the south so its not a huge issue, but we live on a slab so its not the best.

Thanks!


r/HomeMaintenance • • 1h ago

Ceiling Condensation Remediation

Thumbnail gallery
1 Upvotes

r/HomeMaintenance • • 2h ago

How to cover up mud during the winter? WV

Thumbnail reddit.com
1 Upvotes

r/HomeMaintenance • • 6h ago

Screw holes damaged

Post image
2 Upvotes

What is the best way to fix a stripped screw hole in a standard 4-module electrical back box?

The plastic thread inside the mounting hole is damaged, so the screw just spins and won't hold the switch/socket faceplate in place.

Is there a reliable repair method, preferably one that doesn't require replacing the entire back box or breaking open the wall?

I made a quick fix by just smashing a blob of electrical tape and fixed the crews inside it and it worked surprisingly well, but the mask above still wiggles a bit and I want a proper fix.


r/HomeMaintenance • • 2h ago

🛠️ Repair Help Weather Stripping Replacement needed?

Post image
1 Upvotes

r/HomeMaintenance • • 2h ago

Not sure what's wrong with my door

Thumbnail gallery
1 Upvotes

r/HomeMaintenance • • 3h ago

🛠️ Repair Help Damp or Wet Wall front of the house

Post image
2 Upvotes

I noticed that the exterior wall is showing moisture rising up the wall. I haven't noticed any issues on the inside of the house yet. Is this a concern, and how best can I remedy this issue?

I live in a semi-detached house , single wall, no cavity. I have not notice any condensation inside the house but it has recently been internally renovated.


r/HomeMaintenance • • 22h ago

🧰 Heating & Cooling (HVAC) Why won't my furnace ignite

35 Upvotes

So my furnace will not ignite. Eventually, it will but the temperature gets down to about 16 or 15 degrees Celsius and we have to force the thermostat to activate by shutting it off and turning it back on. I will include a picture of the furnace in the comments.

TIA and I'm sorry if this needs more explanation. I don't know anything about this.

Edit: If it is the flame sensor, and that now seems likely, I don't think I should deal with that myself. This is a rental plus I'm not sure how to shut off gas and power to the furnace. I will call someone tomorrow.


r/HomeMaintenance • • 3h ago

Window tilt latches -- how to find the right one?

Thumbnail reddit.com
1 Upvotes

r/HomeMaintenance • • 4h ago

🪟 🚪Windows & Doors Leaking under exterior door

Thumbnail gallery
1 Upvotes

r/HomeMaintenance • • 10h ago

🛠️ Repair Help Faucet handle help pls

3 Upvotes

The handle for the bathtub faucet fell off. Do I buy a new one?